Fix length field corruption in usb dma header introduced adding sdio
support
Fixes: 75b10f0cbd0b ("mt76: mt76u: add mt76_skb_adjust_pad utility routine")
Signed-off-by: Lorenzo Bianconi <[email protected]>
There really is no need to make drivers call the
ieee80211_start_tx_ba_cb_irqsafe() function and then
schedule the worker if all we want is to set a bit.
Add a new return value (that was previously considered
invalid) to indicate that the driver is immediately
ready for the session, and make drivers use it. The
only drivers that remain different are the Intel ones
as they need to negotiate more with the firmware.
Link: https://lore.kernel.org/r/1570007543-I152912660131cbab2e5d80b4218238c20f8a06e5@changeid
Signed-off-by: Johannes Berg <[email protected]>
Fix a possible NULL pointer dereference in mt76_testmode_dump() since
nla_nest_start returns NULL in case of error
Fixes: f0efa8621550e ("mt76: add API for testmode support")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Initialize wcid to global_wcid if msta is NULL in mt7615_pm_wake_work
routine since wcid will be dereferenced running mt76_tx()
Fixes: 2b8cdfb28d340 ("mt76: mt7615: wake device before pushing frames in mt7615_tx")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Fix a memory leak in mt7615_tm_set_tx_power routine if
mt7615_eeprom_get_target_power_index fails.
Moreover do not account req_header twice in mcu skb allocation.
Fixes: 4f0bce1c88882 ("mt76: mt7615: implement testmode support")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
MT7663s have to rely on MMC_PM_KEEP_POWER in pm_flags for to avoid SDIO
power is being shut off.
To fix sdio access failure like "mt7663s mmc1:0001:1: sdio write failed:
-22" for the first sdio command to access the bus in the resume handler.
Fixes: a66cbdd6573d ("mt76: mt7615: introduce mt7663s support")
Co-developed-by: YN Chen <[email protected]>
Signed-off-by: YN Chen <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Fix the following sparse warnings in mt7663s driver:
drivers/net/wireless/mediatek/mt76/mt7615/sdio_mcu.c:78:62: warning:
Using plain integer as NULL pointer
drivers/net/wireless/mediatek/mt76/mt7615/sdio_mcu.c:110:62: warning:
Using plain integer as NULL pointer
drivers/net/wireless/mediatek/mt76/mt7615/sdio_txrx.c:229:64: warning:
Using plain integer as NULL pointer
drivers/net/wireless/mediatek/mt76/mt7615/sdio_txrx.c:263:64: warning:
Using plain integer as NULL pointer
Fixes: a66cbdd6573d ("mt76: mt7615: introduce mt7663s support")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Reduce scope of mutex_acquire/mutex_release in mt7615_reset_test_set
routine in order to fix the following static checker warning:
drivers/net/wireless/mediatek/mt76/mt7615/debugfs.c:179
mt7615_reset_test_set()
warn: inconsistent returns 'dev->mt76.mutex'.
Reported-by: Dan Carpenter <[email protected]>
Fixes: ea4906c4be49 ("mt76: mt7615: wake device before accessing regmap in debugfs")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
On 7615 and newer, DMA completion only triggers unmap, but not free of queued
skbs, since pointers to packets are queued internally.
Because of that, there is no need to process the main data queue immediately
on DMA completion.
To improve performance, mask out the DMA data queue completion interrupt and
process the queue only when we receive a txfree event.
This brings the number of interrupts under load down to a small fraction.
Signed-off-by: Felix Fietkau <[email protected]>
In order to avoid keeping work like tx scheduling pinned to the CPU it was
scheduled from, it makes sense to switch from tasklets to kernel threads.
Signed-off-by: Felix Fietkau <[email protected]>
On 7615 and newer, DMA completion only triggers unmap, but not free of queued
skbs, since pointers to packets are queued internally.
Because of that, there is no need to process the main data queue immediately
on DMA completion.
To improve performance, mask out the DMA data queue completion interrupt and
process the queue only when we receive a txfree event.
This brings the number of interrupts under load down to a small fraction.
Signed-off-by: Felix Fietkau <[email protected]>
The previous scheduling round may have been limited by AQL.
More frames might be available after the tx free run.
Signed-off-by: Felix Fietkau <[email protected]>
With threaded NAPI support it becomes more likely that tx cleanup and tx
enqueuing will run in parallel. In order to avoid queue starvation issues
under load, update q->queued immediately.
Signed-off-by: Felix Fietkau <[email protected]>
With threaded NAPI, the rx handler function is no longer bound to the CPU that
fired the interrupt, which significantly helps to spread the workload over
multiple CPUs, especially when multiple devices are using threaded NAPI at the
same time.
Signed-off-by: Felix Fietkau <[email protected]>
Since DMA completion does not imply tx completion, it makes more sense to
poll for airtime from mt7915_mac_tx_free.
Reduce the runtime of the function by moving all items from dev->sta_poll_list
to a local list once and process any stations that were added afterwards
on the next run
Signed-off-by: Felix Fietkau <[email protected]>
- change the WTBL LMAC access function to set the mapping window only once
- use ac * 2 as offset, since each AC has separate words for rx and tx
Signed-off-by: Felix Fietkau <[email protected]>
Using dev_kfree_skb for tx skbs breaks AQL. This worked until now only
by accident, because a mac80211 issue breaks AQL on drivers with firmware
rate control that report the rate via ieee80211_tx_status_ext as struct
rate_info.
Signed-off-by: Felix Fietkau <[email protected]>
The implementation of embedding WTBL update inside the STA_REC update is buggy
on the MT7615 v2 firmware. This leads to connection issues after a station has
connected and disconnected again.
Switch to the v1 MCU API ops, since they have received much more testing and
should be more stable.
On MT7622 and later, the v2 API is more actively used, so we should keep using
it as well.
Fixes: 6849e29ed92e ("mt76: mt7615: add starec operating flow for firmware v2")
Cc: [email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Use the txwi data as primary source information to avoid touching skb data
Use bitfield instead of state variable + spinlock
Signed-off-by: Felix Fietkau <[email protected]>
mt7615 and newer drivers do not need this, since they use sequence number offload
Moving this code also reduces the number of callsites to make it easier to review
Signed-off-by: Felix Fietkau <[email protected]>
Queueing a per-sta work item from the tx free path can become very expensive
under load. This work is only supposed to pull rate control stats every
second and deal with rate control changes.
Additionally, the rate control update code was wrong, because it was
confusing bit masks and bit numbers in test_bit.
Fix this by introducing a dedicated device work item for rate control
updates, and by polling station stats from the phy mac work.
Stations requiring polling or rate control updates are added to lists
protected by dev->sta_poll_lock.
Signed-off-by: Felix Fietkau <[email protected]>
Only clear unmasked interrupts. If an interrupt is temporarily masked,
its pending events need to be processed later, even if another interrupt
happened in the mean time.
Disable interrupts in one call before scheduling
Signed-off-by: Felix Fietkau <[email protected]>
If an interrupt is temporarily masked, its pending events need to be processed
later, even if another interrupt happened in the mean time.
Signed-off-by: Felix Fietkau <[email protected]>
Only clear unmasked interrupts. If an interrupt is temporarily masked,
its pending events need to be processed later, even if another interrupt
happened in the mean time.
Signed-off-by: Felix Fietkau <[email protected]>
Remove unused state variable in mt76_sdio structure
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
In order to maximize parallelism, split status work in tx status work
and rx net work
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
As it has been done for tx and rx processing, move tx/rx status
processing into mt76s_txrx_wq workqueue
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
