MT7996 hw requires to remove active links from the mcu BSSINFO table
destroying the interface. For this reason introduce mt7996_vif_link_destroy
routine and remove active (non-offchannel) vif links running
mt7996_remove_interface routine.
This is a preliminary patch in order to support MLO link reconfiguration
in MT7996 driver.
Co-developed-by: Shayne Chen <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Destroy mt76_vif_link struct in mt7996_vif_link_remove routine and not
in mt76_unassign_vif_chanctx(). This is necessary since, in order to
properly support MLO link reconfiguration, we will destroy mt76_vif_link
struct during AP tear-down process and not running unassign_vif_chanctx
mac80211 callback.
This patch does not introduce any regression since
mt76_assign_vif_chanctx/mt76_unassign_vif_chanctx APIs are currently
used just by MT7996 driver.
Signed-off-by: Shayne Chen <[email protected]>
Co-developed-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Track active vif links in mt7996_vif_link_add and mt7996_vif_link_remove
routines.
This is a preliminary patch in order to remove AP MLD links from MCU
configuration during AP tear-down process and to support MLO link
reconfiguration in MT7996 driver.
Signed-off-by: Shayne Chen <[email protected]>
Co-developed-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Rely on msta_link link_id value in mt7996_vif_link_remove routine
instead of using link_conf pointer. This assumption is correct since
msta_link link_id is set to link_conf link_id value in mt7996_vif_link_add
routine.
Moreover, fallback to default ieee80211_bss_conf struct if the link_conf
pointer in mt7996_vif_link_remove() is NULL.
MT7996 hw requires to remove AP MLD links from MCU configuration during
AP tear-down process (e.g. running mt7996_remove_interface()). Doing so,
we can't assume link_conf pointer is always non-NULL running
mt7996_vif_link_remove routine.
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Do not switch default link to the secondary link in
mt7996_mac_sta_remove_links routine if the lookup for the secondary
msta_link fails.
Fixes: d7e5444f9eb02 ("wifi: mt76: mt7996: Switch to the secondary link if the default one is removed")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Move the declaration of buf[] outside the for loop, since it must be
preserved across iterations.
Fixes: 224c7c2be578 ("wifi: mt76: mt7996: apply calibration-free data from OTP")
Signed-off-by: StanleyYP Wang <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Align the vendor driver by adjusting the timeout values for the
MCU_UNI_CMD_EFUSE_CTRL and MCU_UNI_CMD_EXT_EEPROM_CTRL commands.
Without this adjustment, false positive command timeout errors may occur,
especially on some iPA variants.
Signed-off-by: Rex Lu <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Skip WFSYS reset during bootup for MT7990 chipsets; only reset if L0.5
recovery is triggered.
Without this fix, the following kernel error may occur:
Internal error: synchronous external abort.
Signed-off-by: Peter Chiu <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Remove link pointer dependency in mt7996_mac_sta_remove_links routine to
get the mt7996_phy pointer since the link can be already offchannel
running mt7996_mac_sta_remove_links(). Rely on __mt7996_phy routine
instead.
Fixes: 344dd6a4c919 ("wifi: mt76: mt7996: Move num_sta accounting in mt7996_mac_sta_{add,remove}_links")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/20260306-mt7996-deflink-lookup-link-remove-v1-1-7162b332873c@kernel.org
Signed-off-by: Felix Fietkau <[email protected]>
With chanctx drivers using hardware scan or remain-on-channel,
mac80211 does not know when the radio goes off-channel, which breaks
its software beacon loss detection.
Implement per-link beacon monitoring in the driver. Track the last
beacon timestamp per link and check for beacon loss periodically from
the mac_work handler.
Beacon monitoring is initialized on association and on late link
activation, and cleared on disassociation. The beacon_mon_last
timestamp is reset when returning from offchannel and after channel
switches to prevent false beacon loss detection.
Signed-off-by: Felix Fietkau <[email protected]>
After flushing software-pending frames to DMA, mt76_has_tx_pending()
only checks DMA ring q->queued. For token-based drivers, q->queued is
decremented at DMA consumption, but firmware may not have transmitted
the frame yet. Waiting for all tokens is not feasible because data
frames may be stuck in firmware powersave/aggregation queues.
Track PSD queue tokens (firmware ALTX) per phy using an atomic counter.
These frames are sent by firmware immediately without PS buffering, so
the counter reliably reaches zero after transmission.
Increment the counter in mt76_token_consume() and decrement it in
mt76_token_release(), only for PSD queue tokens. Include the counter
in mt76_has_tx_pending() so channel switch waits for firmware TX
completion of management and nullfunc frames.
mt7615 (uses mt76_token_get/put) and non-token drivers are unaffected
as they never call mt76_token_consume/release.
Signed-off-by: Felix Fietkau <[email protected]>
Check frame length before accessing the mgmt fields in
mt7996_mac_write_txwi_80211 in order to avoid a possible oob access.
Fixes: 98686cd21624c ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
When the mt7996 pci chip is detaching, the mt7996_crash_data is
released in mt7996_coredump_unregister(). However, the work item
dump_work may still be running or pending, leading to UAF bugs
when the already freed crash_data is dereferenced again in
mt7996_mac_dump_work().
The race condition can occur as follows:
CPU 0 (removal path) | CPU 1 (workqueue)
mt7996_pci_remove() | mt7996_sys_recovery_set()
mt7996_unregister_device() | mt7996_reset()
mt7996_coredump_unregister() | queue_work()
vfree(dev->coredump.crash_data) | mt7996_mac_dump_work()
| crash_data-> // UAF
Fix this by ensuring dump_work is properly canceled before
the crash_data is deallocated. Add cancel_work_sync() in
mt7996_unregister_device() to synchronize with any pending
or executing dump work.
Fixes: 878161d5d4a4 ("wifi: mt76: mt7996: enable coredump support")
Signed-off-by: Duoming Zhou <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Previously, we used the IEEE80211_CONF_IDLE flag to avoid setting the
parking channel with the CH_SWITCH_NORMAL reason, which could trigger TX
emission before bootup CAC.
However, we found that this flag can be set after triggering scanning on a
connected station interface, and the reason CH_SWITCH_SCAN_BYPASS_DPD will
be used when switching back to the operating channel, which makes the
firmware failed to resume paused AC queues.
Seems that we should avoid relying on this flag after switching to single
multi-radio architecture. Instead, use the existence of chanctx as the
condition.
Signed-off-by: StanleyYP Wang <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
When wait_resp is not set but the ACK option is enabled in the MCU TXD,
the ACK event is enqueued to the MCU event queue without being dequeued
by the original MCU command request.
Any orphaned ACK events will only be removed from the queue when another
MCU command requests a response. Due to sequence index mismatches, these
events are discarded one by one until a matching sequence index is found.
However, if several MCU commands that do not require a response continue
to fill up the event queue, there is a risk that when an MCU command with
wait_resp enabled is issued, it may dequeue the wrong event skb,
especially if the queue contains events with all possible sequence
indices.
Signed-off-by: StanleyYP Wang <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
The struct mt76_connac_fw_txp is used for HIF TXP. Change to use the
struct mt76_connac_hw_txp to fix the wrong DMAD length for MAC TXP.
Fixes: cb6ebbdffef2 ("wifi: mt76: mt7996: support writing MAC TXD for AddBA Request")
Signed-off-by: Shayne Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
During hardware restart, link_id can be IEEE80211_LINK_UNSPECIFIED,
causing an out-of-bounds array access on msta->link[].
Add mt7996_sta_link() and mt7996_sta_link_protected() helper functions
for accessing sta links with proper RCU handling and bounds checking.
Use them for any sta link RCU access.
Reported-by: Chad Monroe <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
On channels with NO_IR or RADAR flags, wait for beacon before sending
probe requests. Allows active scanning and WPS on restricted channels
if another AP is already present.
Fixes: c56d6edebc1f ("wifi: mt76: mt7996: use emulated hardware scan support")
Signed-off-by: Chad Monroe <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Move mt7996_npu_hw_stop routine before disabling rx NAPIs in order to
fix NPU stop procedure used during device L1 SER recovery.
Add missing usleep_range in mt7996_npu_hw_stop().
Fixes: 377aa17d2aedc ("wifi: mt76: mt7996: Add NPU offload support to MT7996 driver")
Tested-by: Kang Yang <[email protected]>
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
This patch adds support for handling BSS_CHANGED_ERP_CTS_PROT and
BSS_CHANGED_HT.
With this change, when the Wi-Fi driver needs to adjust its behavior for
compatibility or performance, especially concerning older 11g/n devices,
by enabling or disabling CTS protection frames, often for hidden SSIDs or
to manage legacy clients.
It also introduces debugfs options to manually control protection mode,
allowing users to select betweenno protection, RTS/CTS, and CTS-to-self.
Reviewed-by: Money Wang <[email protected]>
Signed-off-by: Ryder Lee <[email protected]>
Link: https://patch.msgid.link/942ddb5777d5c201930d6609e9ba877a6ba6714a.1768879119.git.ryder.lee@mediatek.com
Signed-off-by: Felix Fietkau <[email protected]>
