roc_abort_sync() can deadlock with roc_work(). roc_work() holds
dev->mt76.mutex, while cancel_work_sync() waits for roc_work()
to finish. If the caller already owns the same mutex, both
sides block and no progress is possible.
This deadlock can occur during station removal when
mt76_sta_state() -> mt76_sta_remove() -> mt7921_mac_sta_remove() ->
mt7921_roc_abort_sync() invokes cancel_work_sync() while
roc_work() is still running and holding dev->mt76.mutex.
This avoids the mutex deadlock and preserves exactly-once
work ownership.
Fixes: 352d966126e6 ("wifi: mt76: mt7921: fix a potential association failure upon resuming")
Co-developed-by: Quan Zhou <[email protected]>
Signed-off-by: Quan Zhou <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
The mt7921_set_roc API may be executed concurrently with mt7921_roc_work,
specifically between the following code paths:
- The check and clear of MT76_STATE_ROC in mt7921_roc_work:
if (!test_and_clear_bit(MT76_STATE_ROC, &phy->mt76->state))
return;
- The execution of ieee80211_iterate_active_interfaces.
This race condition can interrupt the ROC abort flow, resulting in
the ROC process failing to abort as expected.
To address this defect, the modification of MT76_STATE_ROC is now
protected by mt792x_mutex_acquire(phy->dev). This ensures that
changes to the ROC state are properly synchronized, preventing
race conditions and ensuring the ROC abort flow is not interrupted.
Fixes: 034ae28b56f1 ("wifi: mt76: mt7921: introduce remain_on_channel support")
Cc: [email protected]
Signed-off-by: Quan Zhou <[email protected]>
Reviewed-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/2568ece8b557e5dda79391414c834ef3233049b6.1769133724.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <[email protected]>
After the chip reset, the procedure to set the tx power will not be
successful because the previous region setting is still remains.
Clear the region setting during MAC initialization and allow it to be
reset to finalize the TX power setting.
Fixes: 3bc62aa4484d ("wifi: mt76: mt7925: add auto regdomain switch support")
Signed-off-by: Leon Yen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
mt76_connac_mcu_alloc_sta_req() allocates an skb which is expected to
be freed eventually by mt76_mcu_skb_send_msg(). However, currently if
an intermediate function fails before sending, the allocated skb is
leaked.
Specifically, mt76_connac_mcu_sta_wed_update() and
mt76_connac_mcu_sta_key_tlv() may fail, leading to an immediate memory
leak in the error path.
Fix this by explicitly freeing the skb in these error paths.
Commit 7c0f63fe37a5 ("wifi: mt76: mt7996: fix memory leak on
mt7996_mcu_sta_key_tlv error") made a similar change.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: d1369e515efe ("wifi: mt76: connac: introduce mt76_connac_mcu_sta_wed_update utility routine")
Fixes: 6683d988089c ("mt76: connac: move mt76_connac_mcu_add_key in connac module")
Fixes: 4f831d18d12d ("wifi: mt76: mt7915: enable WED RX support")
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Zilin Guan <[email protected]>
Link: https://patch.msgid.link/[email protected]
We are experiencing command timeouts because an upper layer triggers
an unexpected scan while the system/device is in suspend.
The upper layer should not initiate scans until the NIC has fully resumed.
We want to prevent scans during suspend and avoid timeouts without harming
power management or user experience.
Signed-off-by: Michael Lo <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
IEEE80211_CHANCTX_CHANGE_PUNCTURING is a channel context change
flag and should not be checked in the BSS change handler, where
the changed mask represents enum ieee80211_bss_change.
Remove the puncturing handling from the BSS path and rely on
mt7925_change_chanctx() to update puncturing configuration.
Fixes: cadebdad959b ("wifi: mt76: mt7925: add EHT preamble puncturing")
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
An extra blank line gets printed after printing firmware version
because the build date is null terminated. Remove the "\n" from
dev_info() calls to print firmware version and build date to fix
the problem.
Reported-by: Mario Limonciello <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Move mt7996_npu_hw_stop routine before disabling rx NAPIs in order to
fix NPU stop procedure used during device L1 SER recovery.
Add missing usleep_range in mt7996_npu_hw_stop().
Fixes: 377aa17d2aedc ("wifi: mt76: mt7996: Add NPU offload support to MT7996 driver")
Tested-by: Kang Yang <[email protected]>
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
All MT76 rx queues have an associated page_pool even if the queue is not
associated to a NAPI (e.g. WED RRO queues with WED enabled). Destroy the
page_pool running mt76_dma_cleanup routine during module unload.
Moreover returns pages to the page pool if WED is not enabled for WED RRO
queues.
Fixes: 950d0abb5cd94 ("wifi: mt76: mt7996: add wed rx support")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
In order to recycle skbs in the page_pool "hot" cache in
napi_pp_put_page routine, set napi pointer for MMIO devices in
mt76_create_page_pool().
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
mt76_wcid_cleanup() was not removing wcid entries from sta_poll_list
before mt76_reset_device() reinitializes the master list. This leaves
stale pointers in wcid->poll_list, causing list corruption when
mt76_wcid_add_poll() later checks list_empty() and tries to add the
entry back.
The fix adds proper cleanup of poll_list in mt76_wcid_cleanup(),
matching how tx_list is already handled. This is similar to what
mt7996_mac_sta_deinit_link() already does correctly.
Fixes list corruption warnings like:
list_add corruption. prev->next should be next (ffffffff...)
Signed-off-by: Zac Bowling <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
roc_abort_sync() can deadlock with roc_work(). roc_work() holds
dev->mt76.mutex, while cancel_work_sync() waits for roc_work()
to finish. If the caller already owns the same mutex, both
sides block and no progress is possible.
This deadlock can occur during station removal when
mt76_sta_state() -> mt76_sta_remove() ->
mt7925_mac_sta_remove_link() -> mt7925_mac_link_sta_remove() ->
mt7925_roc_abort_sync() invokes cancel_work_sync() while
roc_work() is still running and holding dev->mt76.mutex.
This avoids the mutex deadlock and preserves exactly-once
work ownership.
Fixes: 45064d19fd3a ("wifi: mt76: mt7925: fix a potential association failure upon resuming")
Co-developed-by: Quan Zhou <[email protected]>
Signed-off-by: Quan Zhou <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Set the MT76_STATE_MCU_RUNNING bit only after mt7921_load_clc()
has successfully completed. Previously, the MCU_RUNNING state
was set before loading CLC, which could cause conflict between
chip mcu_init retry and mac_reset flow, result in chip init fail
and chip abnormal status. By moving the state set after CLC load,
firmware initialization becomes robust and resolves init fail issue.
Signed-off-by: Quan Zhou <[email protected]>
Reviewed-by: [email protected]
Link: https://patch.msgid.link/19ec8e4465142e774f17801025accd0ae2214092.1763465933.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <[email protected]>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
In mt7615_mcu_wtbl_sta_add(), an skb sskb is allocated. If the
subsequent call to mt76_connac_mcu_alloc_wtbl_req() fails, the function
returns an error without freeing sskb, leading to a memory leak.
Fix this by calling dev_kfree_skb() on sskb in the error handling path
to ensure it is properly released.
Fixes: 99c457d902cf9 ("mt76: mt7615: move mt7615_mcu_set_bmc to mt7615_mcu_ops")
Signed-off-by: Zilin Guan <[email protected]>
Acked-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
This patch adds support for handling BSS_CHANGED_ERP_CTS_PROT and
BSS_CHANGED_HT.
With this change, when the Wi-Fi driver needs to adjust its behavior for
compatibility or performance, especially concerning older 11g/n devices,
by enabling or disabling CTS protection frames, often for hidden SSIDs or
to manage legacy clients.
It also introduces debugfs options to manually control protection mode,
allowing users to select betweenno protection, RTS/CTS, and CTS-to-self.
Reviewed-by: Money Wang <[email protected]>
Signed-off-by: Ryder Lee <[email protected]>
Link: https://patch.msgid.link/942ddb5777d5c201930d6609e9ba877a6ba6714a.1768879119.git.ryder.lee@mediatek.com
Signed-off-by: Felix Fietkau <[email protected]>
Driver should not directly write WTBL to prevent overwritten issues.
With this fix, when driver needs to adjust its behavior for compatibility,
especially concerning older 11g/n devices, by enabling or disabling CTS
protection frames, often for hidden SSIDs or to manage legacy clients.
Fixes: e34235ccc5e3 ("wifi: mt76: mt7615: enable use_cts_prot support")
Signed-off-by: Ryder Lee <[email protected]>
Link: https://patch.msgid.link/edb87088b0111b32fafc6c4179f54a5286dd37d8.1768879119.git.ryder.lee@mediatek.com
Signed-off-by: Felix Fietkau <[email protected]>
A deadlock may occur between two works, ps_work and mac_work, if their work
functions run simultaneously as they attempt to cancel each other by
calling cancel_delayed_work_sync().
mt792x_mac_work() -> ... -> cancel_delayed_work_sync(&pm->ps_work);
mt792x_pm_power_save_work() -> cancel_delayed_work_sync(&mphy->mac_work);
In high-load situations, they are queued but may not have chance to be
executed until the CPUs are released. Once the CPUs are available, there
is a high possibility that the ps_work function and mac_work function will
be executed simultaneously, resulting in a possible deadlock.
This patch replaces cancel_delayed_work_sync() with cancel_delayed_work()
in ps_work to eliminate the deadlock and make the code easier to maintain.
Signed-off-by: Leon Yen <[email protected]>
Tested-by: Chia-Lin Kao (AceLan) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
The selection of MLO mode should depend on the capabilities of the STA
rather than those of the peer AP to avoid compatibility issues with
certain APs, such as Xiaomi BE5000 WiFi7 router.
Fixes: 69acd6d910b0c ("wifi: mt76: mt7925: add mt7925_change_vif_links")
Signed-off-by: Leon Yen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Reset ampdu_state if ieee80211_start_tx_ba_session() fails in
mt76_connac2_tx_check_aggr(), otherwise the driver may incorrectly
assume aggregation is active and skip future BA setup attempts.
Fixes: 163f4d22c118 ("mt76: mt7921: add MAC support")
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Clear WCID pointer removing the sta link in mt7996_mac_sta_deinit_link
routine.
Fixes: dd82a9e02c054 ("wifi: mt76: mt7996: Rely on mt7996_sta_link in sta_add/sta_remove callbacks")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Switch to the secondary link if available in mt7996_mac_sta_remove_links
routine if the primary one is removed.
Moreover reset secondary link index for single link scenario.
Fixes: 85cd5534a3f2e ("wifi: mt76: mt7996: use correct link_id when filling TXD and TXP")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Reset WCID index in mt76_txq struct if primary link is removed in
mt7996_vif_link_remove routine.
Fixes: a3316d2fc669f ("wifi: mt76: mt7996: set vif default link_id adding/removing vif links")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Set WCID index in mt76_txq struct just for the primary link in
mt7996_vif_link_add routine.
Fixes: 69d54ce7491d0 ("wifi: mt76: mt7996: switch to single multi-radio wiphy")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
The shared reset procedure of MT7610 and MT7612 stop all queues before
starting the reset sequence.
They however never restart these like other supported mt76 chips
do in the reconfig_complete call. This leads to TX not continuing
after the reset.
Restart queues in the reconfig_complete callback to restore
functionality after the reset.
Signed-off-by: David Bauer <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Previously, the AMPDU state bit for a given TID was set before attempting
to start a BA session, which could result in the AMPDU state being marked
active even if ieee80211_start_tx_ba_session() failed. This patch changes
the logic to only set the AMPDU state bit after successfully starting a BA
session, ensuring proper synchronization between AMPDU state and BA session
status.
This fixes potential issues with aggregation state tracking and improves
compatibility with mac80211 BA session management.
Fixes: 44eb173bdd4f ("wifi: mt76: mt7925: add link handling in mt7925_txwi_free")
Cc: [email protected]
Signed-off-by: Quan Zhou <[email protected]>
Reviewed-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/d5960fbced0beaf33c30203f7f8fb91d0899c87b.1764228973.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <[email protected]>
MT7992 and MT7990 support up to 19 interfaces per band and 32 in total.
Fixes: 8df63a4bbe3d ("wifi: mt76: mt7996: adjust interface num and wtbl size for mt7992")
Signed-off-by: Shayne Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Since some radar specifications maintained by the driver are incorrect
and are now also maintained by the firmware, offload the initialization
procedure to the firmware.
This fixes issues for radar detection rate testings.
Signed-off-by: StanleyYP Wang <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
