Having this unset breaks remain-on-channel and mgmt TX.
Move setting it to mt76 core to keep it in one place.
Fixes: 69d54ce7491d0 ("wifi: mt76: mt7996: switch to single multi-radio wiphy")
Signed-off-by: Felix Fietkau <[email protected]>
During hardware restart, link_id can be IEEE80211_LINK_UNSPECIFIED,
causing an out-of-bounds array access on msta->link[].
Add mt7996_sta_link() and mt7996_sta_link_protected() helper functions
for accessing sta links with proper RCU handling and bounds checking.
Use them for any sta link RCU access.
Reported-by: Chad Monroe <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
The current WED only supports 256 wcid, whereas mt7986 can support up to
512 entries, so firmware provides a rule to get sta_info by DA when wcid
is set to 0x3ff by txd. Also, WED provides a register to overwrite txd
wcid, that is, wcid[9:8] can be overwritten by 0x3 and wcid[7:0] is set
to 0xff by host driver.
However, firmware is unable to get sta_info from DA as DA != RA for
4addr cases, so firmware and wifi host driver both use wcid (256 - 271)
and (768 ~ 783) for sync up to get correct sta_info.
Currently WDS+WED config is completely broken on MT7986/7981 devices if
without this patch.
Signed-off-by: Bo Jiao <[email protected]>
Signed-off-by: Sujuan Chen <[email protected]>
Signed-off-by: Shengyu Qu <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
MediaTek has asked to switch from the ISC license to BSD-3-Clause-Clear,
in order to improve clarity and the legal integrity of the code.
The BSD-3-Clause license includes the "no endorsement" clause, which is
important for protecting the reputation of the original authors and
contributors by preventing unauthorized use of their names for endorsement
purposes.
This clause is absent in the BSD-2-Clause license, which is more permissive
but lacks this specific protection.
This change also cleans up the license of some Kconfig/Makefile files,
which were accidentally marked as GPL.
The GPL 2.0 remains in use on mt76x0, as well as two source files in mt7615
for which the license situation still needs to be clarified.
Signed-off-by: Felix Fietkau <[email protected]>
The extra copyright line for Ivo van Doorn and GPL license was only there
because of code that I had already removed before the initial upstream
submission of mt76.
Remove it and make this header file use ISC license like the rest of the
source files.
Signed-off-by: Felix Fietkau <[email protected]>
If a link does not have an assigned channel yet, mt7996_vif_link returns
NULL. We still need to store the updated queue settings in that case, and
apply them later.
Move the location of the queue params to within struct mt7996_vif_link.
Fixes: c0df2f0caa8d ("wifi: mt76: mt7996: prepare mt7996_mcu_set_tx for MLO support")
Signed-off-by: Felix Fietkau <[email protected]>
Ensure that a key for a link is only added and removed once.
When bringing up a link, only upload keys for that particular link, instead
of iterating over all of them.
Signed-off-by: Felix Fietkau <[email protected]>
While deleting sta keys can be omitted in order to fix race conditions,
vif keys must be deleted before being replaced in order to prevent
accidental reuse in firmware.
Signed-off-by: Felix Fietkau <[email protected]>
Include beacon key information in the STA_REC_UPDATE call.
Remove mt7996_mcu_get_pn - when installing a new key, we should
not reuse any existing PN value.
Signed-off-by: Allen Ye <[email protected]>
Signed-off-by: Michael-CY Lee <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
This allows faster recovery from firmware issues.
Based on patch by Chad Monroe and ported from mt7915.
Signed-off-by: Felix Fietkau <[email protected]>
Port latest version of similar changes from mt7915:
- use reconfig_complete to restart mac_work / queues
- reset full wtbl after firmware init
- clear wcid and vif mask to avoid leak
- fix sta poll list corruption
- clear rro list
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
There is only one wiphy, so extra calls must be removed.
For calls that need to remain per-wiphy, use mt7996_for_each_phy
Fixes: 69d54ce7491d ("wifi: mt76: mt7996: switch to single multi-radio wiphy")
Signed-off-by: Felix Fietkau <[email protected]>
Never leave scheduled wcid entries on the temporary on-stack list
Fixes: 0b3be9d1d34e ("wifi: mt76: add separate tx scheduling queue for off-channel tx")
Signed-off-by: Felix Fietkau <[email protected]>
Avoid leaking them or keeping the wcid on the tx list
Fixes: 0b3be9d1d34e ("wifi: mt76: add separate tx scheduling queue for off-channel tx")
Signed-off-by: Felix Fietkau <[email protected]>
Since stations are recreated from scratch, all lists that wcids are added
to must be cleared before calling ieee80211_restart_hw.
Set wcid->sta = 0 for each wcid entry in order to ensure that they are
not added again before they are ready.
Signed-off-by: Felix Fietkau <[email protected]>
Non-station wcid entries must not be passed to the rx functions.
In case of the global wcid entry, it could even lead to corruption in the wcid
array due to pointer being casted to struct mt7996_sta_link using container_of.
Fixes: 7464b12b7d92 ("wifi: mt76: mt7996: rework mt7996_rx_get_wcid to support MLO")
Signed-off-by: Felix Fietkau <[email protected]>
When a wcid can't be found, link_sta can be stale from a previous batch.
The code currently assumes that if link_sta is set, wcid is also non-zero.
Fix wcid NULL pointer dereference by resetting link_sta when a wcid entry
can't be found.
Fixes: 62da647a2b20 ("wifi: mt76: mt7996: Add MLO support to mt7996_tx_check_aggr()")
Signed-off-by: Felix Fietkau <[email protected]>
Only put probe request packets in the offchannel queue if
IEEE80211_TX_CTRL_DONT_USE_RATE_MASK is set and IEEE80211_TX_CTL_TX_OFFCHAN
is unset.
Fixes: 0b3be9d1d34e ("wifi: mt76: add separate tx scheduling queue for off-channel tx")
Reported-by: Chad Monroe <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Avoid leaking beacons on unrelated channels during scanning/roc
Fixes: c56d6edebc1f ("wifi: mt76: mt7996: use emulated hardware scan support")
Reported-by: Chad Monroe <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Several places use rcu_dereference to get a wcid entry without validating
if the index exceeds the array boundary. Fix this by using a helper function,
which handles validation.
Signed-off-by: Felix Fietkau <[email protected]>
When running in AP mode and deauthenticating a client that's in powersave
mode, the disassoc/deauth packet can get stuck in a tx queue along with
other buffered frames. This can fill up hardware queues with frames
that are only released after the WTBL slot is reused for another client.
Fix this by moving deauth packets to the ALTX queue.
Signed-off-by: Felix Fietkau <[email protected]>
The interrupt status polling is unreliable, which can cause status events
to get lost. On all newer chips, txs-timeout is an indication that the
packet was either never sent, or never acked.
Fixes issues with inactivity polling.
Signed-off-by: Felix Fietkau <[email protected]>
Fixes reporting tx power for vifs that don't have a channel context
assigned. Report the tx power of a phy that is covered by the vif's
radio mask.
Signed-off-by: Felix Fietkau <[email protected]>
Fixes linked list management issues during restart, where sta entries
can be recreated and reinitialized while still in the poll list, triggering
kernel warnings.
Signed-off-by: Felix Fietkau <[email protected]>
When a client is roaming to a different AP interface, a duplicate wtbl entry
can be created. This can lead to lost packets or aggregation issues until
the old entry expires.
In order to fix this issue, delete any conflicting entries from WTBL
whenever a station is authorized.
Signed-off-by: Felix Fietkau <[email protected]>
Avoids sending packets too early
Fixes: 0b3be9d1d34e ("wifi: mt76: add separate tx scheduling queue for off-channel tx")
Signed-off-by: Felix Fietkau <[email protected]>
Use generic mt76 chanctx functions and look up phy from vif link.
The driver now uses only a single phy to handle multiple interfaces on
different channels. This is preparation for full MLO support.
Signed-off-by: Felix Fietkau <[email protected]>
This allows a driver using the generic channel context functions to
temporarily switch to another channel for off-channel rx/tx.
Signed-off-by: Felix Fietkau <[email protected]>
When scanning on a phy/vif combination that does not have an active link,
create a temporary link in order to ensure that we have a valid wcid.
Signed-off-by: Felix Fietkau <[email protected]>
This adds an implementation for the chanctx functions, which can be used
by multi-channel capable drivers. Preparation for adding MLO support.
Signed-off-by: Felix Fietkau <[email protected]>
Preparation for supporting multiple radios on a single wiphy on devices
where firmware does not support actual hardware scanning.
This is also a prerequisite for full MLO support
Co-developed-by: Peter Chiu <[email protected]>
Signed-off-by: Peter Chiu <[email protected]>
Co-developed-by: Michael-CY Lee <[email protected]>
Signed-off-by: Michael-CY Lee <[email protected]>
Co-developed-by: Shayne Chen <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Reset per-phy mac address slot mask in order to avoid leaking entries.
Fixes: 8a55712d124f ("wifi: mt76: mt7915: enable full system reset support")
Signed-off-by: Felix Fietkau <[email protected]>
It seems that the firmware checks the register used for detecting matching
PCIe links in order to figure out if a secondary PCIe link is enabled.
Write the register again just before starting the firmware on hw reset,
in order to fix an issue that left the second band unusable after restart.
Fixes: 9093cfff72e3 ("mt76: mt7915: add support for using a secondary PCIe link for gen1")
Signed-off-by: Felix Fietkau <[email protected]>
The need to retry a command is really uncommon. Reduce the retries to 1 to
speed up recovery from firmware issues.
Signed-off-by: Felix Fietkau <[email protected]>
The second PCIe link is only used to improve performance on older generation
PCIe devices (e.g. MT7621) where the bus speed of one link is not enough to
saturate both wifi bands under really good conditions.
Unfortunately it seems that resetting the hardware after a firmware error
causes the second band to stop working if the second link is in use.
Disable the link until the issue is properly fixed.
For testing, the link can still be enabled via module parameter.
Fixes: 9093cfff72e3 ("mt76: mt7915: add support for using a secondary PCIe link for gen1")
Signed-off-by: Felix Fietkau <[email protected]>
If mcu_skb_prepare_msg is not implemented, incrementing skb refcount does not
work for mcu message retry. In some cases (e.g. on SDIO), shared skbs can trigger
a BUG_ON, crashing the system.
Fix this by only incrementing refcount if retry is actually supported.
Fixes: 3688c18b65ae ("wifi: mt76: mt7915: retry mcu messages")
Reported-by: Nícolas F. R. A. Prado <[email protected]> #KernelCI
Tested-by: Alper Nebi Yasak <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Felix Fietkau