mirror of
https://github.com/outbackdingo/optimclaw.git
synced 2026-08-25 14:53:34 +00:00
8f8cb7f7b1767d28f62ec74a14bf8eb74dd1097a
12
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
8f8cb7f7b1 |
feat: DB-backed user management, admin secrets provisioning, and multi-tenant isolation (#1626)
* feat: complete multi-tenant isolation — per-user budgets, model selection, heartbeat cycling Finishes the remaining isolation work from phases 2–4 of #59: Phase 2 (DB scoping): Fix /status and /list commands to use _for_user DB variants instead of global queries that leaked cross-user job data. Phase 3 (Runtime isolation): Per-user workspace in routine engine's spawn_fire so lightweight routines run in the correct user context. Per-user daily cost tracking in CostGuard with configurable budget via MAX_COST_PER_USER_PER_DAY_CENTS. Multi-user heartbeat that cycles through all users with routines, auto-detected from GATEWAY_USER_TOKENS. Phase 4 (Provider/tools): Per-user model selection via preferred_model setting — looked up from SettingsStore on first iteration, threaded through ReasoningContext.model_override to CompletionRequest. Works with providers that support per-request model overrides (NearAI). Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: use selected_model setting key to match /model command persistence The dispatcher was reading "preferred_model" but the /model command (merged from staging) persists to "selected_model". Since set_setting is already per-user scoped, using the same key makes /model work as the per-user model override in multi-tenant mode. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: heartbeat hygiene, /model multi-tenant guard, RigAdapter model override Three follow-up fixes for multi-tenant isolation: 1. Multi-user heartbeat now runs memory hygiene per user before each heartbeat check, matching single-user heartbeat behavior. 2. /model command in multi-tenant mode only persists to per-user settings (selected_model) without calling set_model() on the shared LlmProvider. The per-request model_override in the dispatcher reads from the same setting. Added multi_tenant flag to AgentConfig (auto-detected from GATEWAY_USER_TOKENS). 3. RigAdapter now supports per-request model overrides by injecting the model name into rig-core's additional_params. OpenAI/Anthropic/Ollama API servers use last-key-wins for duplicate JSON keys, so the override takes effect via serde's flatten serialization order. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: address PR review — cost model attribution, heartbeat concurrency, pruning Fixes from review comments on #1614: - Cost tracking now uses the override model name (not active_model_name) when a per-user model override is active, for accurate attribution. - Multi-user heartbeat runs per-user checks concurrently via JoinSet instead of sequentially, preventing one slow user from blocking others. - Per-user failure counts tracked independently; users exceeding max_failures are skipped (matching single-user semantics). - per_user_daily_cost HashMap pruned on day rollover to prevent unbounded growth in long-lived deployments. - Doc comment fixed: says "routines" not "active routines". Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: /status ownership, model persistence scoping, heartbeat robustness Addresses second round of PR review on #1614: - /status <job_id> DB path now validates job.user_id == requesting user before returning data (was missing ownership check, security fix). - persist_selected_model takes user_id param instead of owner_id, and skips .env/TOML writes in multi-tenant mode (these are shared global files). handle_system_command now receives user_id from caller. - JoinSet collection handles Err(JoinError) explicitly instead of silently dropping panicked tasks. - Notification forwarder extracts owner_id from response metadata in multi-tenant mode for per-user routing instead of broadcasting to the agent owner. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: cost pricing, fire_manual workspace, heartbeat concurrency cap Round 3 review fixes: - Cost tracking passes None for cost_per_token when model override is active, letting CostGuard look up pricing by model name instead of using the default provider's rates (serrrfirat). - fire_manual() now uses per-user workspace, matching spawn_fire() pattern (serrrfirat). - Removed MULTI_TENANT env var — multi-tenant mode is auto-detected solely from GATEWAY_USER_TOKENS presence (serrrfirat + Copilot). - Multi-user heartbeat capped at 8 concurrent tasks to avoid flooding the LLM provider (serrrfirat + Copilot). - Fixed inject_model_override doc comment accuracy (Copilot). - Added comment explaining multi-tenant notification routing priority (Copilot). Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * feat: user-scoped webhook endpoint for multi-tenant isolation Adds POST /api/webhooks/u/{user_id}/{path} — a user-scoped webhook endpoint that filters the routine lookup by user_id, preventing cross-user webhook triggering when paths collide. The existing /api/webhooks/{path} endpoint remains unchanged for backward compatibility in single-user deployments. Changes: - get_webhook_routine_by_path gains user_id: Option<&str> param - Both postgres and libsql implementations add AND user_id = ? filter when user_id is provided - New webhook_trigger_user_scoped_handler extracts (user_id, path) from URL and passes to shared fire_webhook_inner logic - Route registered on public router (webhooks are called by external services that can't send bearer tokens) Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * feat(db): add UserStore trait with users, api_tokens, invitations tables Foundation for DB-backed user management (#1605): - UserRecord, ApiTokenRecord, InvitationRecord types in db/mod.rs - UserStore sub-trait (17 methods) added to Database supertrait - PostgreSQL migration V14__users.sql (users, api_tokens, invitations) - libSQL schema + incremental migration V14 - Full implementations for both PgBackend (via Store delegation) and LibSqlBackend (direct SQL in libsql/users.rs) - authenticate_token JOINs api_tokens+users with active/non-revoked checks; has_any_users for bootstrap detection Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * feat(web): DB-backed auth, user/token/invitation API handlers Adds the web gateway layer for DB-backed user management (#1605): Auth refactor: - CombinedAuthState wraps env-var tokens (MultiAuthState) + optional DbAuthenticator for DB-backed token lookup with LRU cache (60s TTL, 1024 max entries) - auth_middleware tries env-var tokens first, then DB fallback - From<MultiAuthState> impl for backward compatibility - main.rs wires with_db_auth when database is available API handlers (12 new endpoints): - /api/admin/users — CRUD: create, list, detail, update, suspend, activate - /api/tokens — create (returns plaintext once), list, revoke - /api/invitations — create, list, accept (creates user + first token) Token creation: 32 random bytes → hex plaintext, SHA-256 hash stored. Invitation accept: validates hash + pending + not expired, creates user record and first API token atomically. All test files updated for CombinedAuthState type change. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * feat: startup env-var user migration + UserStore integration tests Completes the DB-backed user management feature (#1605): - Startup migration: when GATEWAY_USER_TOKENS is set and the users table is empty, inserts env-var users + hashed tokens into DB. Logs deprecation notice when DB already has users. - hash_token made pub for reuse in migration code. - 10 integration tests for UserStore (libsql file-backed): - has_any_users bootstrap detection - create/get/get_by_email/list/update user lifecycle - token create → authenticate → revoke → reject cycle - suspended user tokens rejected - wrong-user token revoke returns false - invitation create → accept → user created - record_login and record_token_usage timestamps - libSQL migration: removed FK constraints from V14 (incompatible with execute_batch inside transactions). Tables in both base SCHEMA and incremental migration for fresh and existing databases. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * refactor: remove GATEWAY_USER_TOKENS, fix review feedback GATEWAY_USER_TOKENS never went to production — replaced entirely by DB-backed user management via /api/admin/users and /api/tokens. Removed: - UserTokenConfig struct and GATEWAY_USER_TOKENS env var parsing - user_tokens field from GatewayConfig - GatewayChannel::new_multi_auth() constructor - Env-var user migration block in main.rs (~90 lines) - multi_tenant auto-detection from GATEWAY_USER_TOKENS (now runtime via db.has_any_users() in app.rs) Review fixes (zmanian): - User ID generation: UUID instead of display-name derivation (#1) - Invitation accept moved to public router (no auth needed) (#3) - libSQL get_invitation_by_hash aligned with postgres: filters status='pending' AND expires_at > now (#4) - UUID parse: returns DatabaseError::Serialization instead of unwrap_or_default (#7) - PostgreSQL SELECT * replaced with explicit column lists (#8) - Sort order aligned (both backends use DESC) (#6) Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * feat: add role-based access control (admin/member) Adds a `role` field (admin|member) to user management: Schema: - `role TEXT NOT NULL DEFAULT 'member'` added to users table in both PostgreSQL V14 migration and libSQL schema/incremental migration - UserRecord gains `role: String` field - UserIdentity gains `role: String` field, populated from DB in DbAuthenticator and defaulting to "admin" for single-user mode Access control: - AdminUser extractor: returns 403 Forbidden if role != "admin" - /api/admin/users/* handlers: require AdminUser (create, list, detail, update, suspend, activate) - POST /api/invitations: requires AdminUser (only admins can invite) - User creation accepts optional "role" param (defaults to "member") - Invitation acceptance creates users with "member" role Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * feat(web): add Users admin tab to web UI Adds a Users tab to the web gateway UI for managing users, tokens, and roles without needing direct API calls. Features: - User list table with ID, name, email, role, status, created date - Create user form with display name, email, role selector - Suspend/activate actions per user - Create API token for any user (shows plaintext once with copy button) - Role badges (admin highlighted, member muted) - Non-admin users see "Admin access required" message - Keyboard shortcut: Cmd/Ctrl+5 switches to Users tab CSS: - Reuses routines-table styles for the user list - Badge, token-display, btn-small, btn-danger, btn-primary components Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: move Users to Settings subtab, bootstrap admin user on first run - Moved Users from top-level tab to Settings sidebar subtab (under Skills, before Theme toggle) - On first startup with empty users table, automatically creates an admin user from GATEWAY_USER_ID config with a corresponding API token from GATEWAY_AUTH_TOKEN. This ensures the owner appears in the Users panel immediately. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: user creation shows token, + Token works, no password save popup Three UI/UX fixes: 1. Create user now generates an initial API token and shows it in a copy-able banner instead of triggering the browser's password save dialog. Uses autocomplete="off" and type="text" for email field. 2. "+ Token" button works: exposed createTokenForUser/suspendUser/ activateUser on window for inline onclick handlers in dynamically generated table rows. Token creation uses showTokenBanner helper. 3. Admin token creation: POST /api/tokens now accepts optional "user_id" field when the requesting user is admin, allowing token creation for other users from the Users panel. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: use event delegation for user action buttons (CSP compliance) Inline onclick handlers are blocked by the Content-Security-Policy (script-src 'self' without 'unsafe-inline'). Switched to data-action attributes with a delegated click listener on the users table. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: add i18n for Users subtab, show login link on user creation - Added 'settings.users' i18n key for English and Chinese - Token banner now shows a full login link (domain/?token=xxx) with a Copy Link button, plus the raw token below - Login link works automatically via existing ?token= auto-auth Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: token hash mismatch — hash hex string, not raw bytes Critical auth bug: token creation hashed the raw 32 bytes (hasher.update(token_bytes)) but authentication hashed the hex-encoded string (hash_token(candidate) where candidate is the hex string the user sends). This meant newly created tokens could never authenticate. Fixed all 4 token creation sites (users, tokens, invitations create, invitations accept) to use hash_token(&plaintext_token) which hashes the hex string consistently with the auth lookup path. Removed now-unused sha2::Digest imports from handlers. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * refactor: remove invitation system The invitation flow is redundant — admin create user already generates a token and shows a login link. Invitations add complexity without value until email integration exists. Removed: - InvitationRecord struct and 4 UserStore trait methods - invitations table from V14 migration (postgres + both libsql schemas) - PostgreSQL Store methods (create/get/accept/list invitations) - libSQL UserStore invitation methods + row_to_invitation helper - invitations.rs handler file (212 lines) - /api/invitations routes (create, list, accept) - test_invitation_lifecycle test Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * feat: user deletion, self-service profile, per-user job limits, usage API Four multi-tenancy improvements: 1. User deletion cascade (DELETE /api/admin/users/{id}): Deletes user and all data across 11 user-scoped tables (settings, secrets, routines, memory, jobs, conversations, etc.). Admin only. 2. Self-service profile (GET/PATCH /api/profile): Users can read and update their own display_name and metadata without admin privileges. 3. Per-user job concurrency (MAX_JOBS_PER_USER env var): Scheduler checks active_jobs_for(user_id) before dispatch. Prevents one user from exhausting all job slots. 4. Usage reporting (GET /api/admin/usage?user_id=X&period=day|week|month): Aggregates LLM costs from llm_calls via agent_jobs.user_id. Returns per-user, per-model breakdown of calls, tokens, and cost. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * feat: add TenantCtx for compile-time tenant isolation Implements zmanian's architectural proposal from #1614 review: two-tier scoped database access (TenantScope/AdminScope) so handler code cannot accidentally bypass tenant scoping. TenantScope (default): wraps user_id + Arc<dyn Database>, auto-binds user_id on every operation. ID-based lookups return None for cross- tenant resources. No escape hatch — forgetting to scope is a compile error. AdminScope (explicit opt-in): cross-tenant access for system-level components (heartbeat, routine engine, self-repair, scheduler, worker). TenantCtx bundles TenantScope + workspace + cost guard + per-user rate limiting. Constructed once per request in handle_message, threaded through all command handlers and ChatDelegate. Key changes: - New src/tenant.rs (~920 lines): TenantScope, AdminScope, TenantCtx, TenantRateState, TenantRateRegistry - All command handlers: user_id: &str → ctx: &TenantCtx - ChatDelegate: cost check/record/settings via self.tenant - System components: store field changed to AdminScope - Config: TENANT_MAX_LLM_CONCURRENT, TENANT_MAX_JOBS_CONCURRENT env vars - Fixes bug: /status <job_id> cross-tenant leak (now auto-filtered) Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: address PR #1626 review feedback — bounded LRU cache, admin auth, FK cleanup - Replace HashMap with lru::LruCache in DbAuthenticator so the token cache is hard-bounded at 1024 entries (evicts LRU, not just expired) - Gate admin user endpoints (list/detail/update/suspend/activate) with AdminUser extractor so members get 403 instead of full access - Add api_tokens to libSQL delete_user cleanup list to prevent orphaned tokens (libSQL has no FK cascade) - Add regression tests for all three fixes Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: update CA certificates in runtime Docker image Ensures the root certificate bundle is current so TLS handshakes to services like Supabase succeed on Railway. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: resolve CI failures — formatting, no-panics check - Run cargo fmt on test code - Replace .expect() with const NonZeroUsize in DbAuthenticator - Add // safety: comments for test-only code in multi_tenant.rs Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: switch PostgreSQL TLS from rustls to native-tls rustls with rustls-native-certs fails TLS handshake on Railway's slim container (empty or stale root cert store). native-tls delegates to OpenSSL on Linux which handles system certs more reliably. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * Adding user management api * feat: admin secrets provisioning API + API documentation - Add PUT/GET/DELETE /api/admin/users/{id}/secrets/{name} endpoints for application backends to provision per-user secrets (AES-256-GCM encrypted) - Add secrets_store field to GatewayState with builder wiring - Create docs/USER_MANAGEMENT_API.md with full API spec covering users, secrets, tokens, profile, and usage endpoints - Update web gateway CLAUDE.md route table Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: add CatchPanicLayer to capture handler panics Without this, panics in async handlers silently drop the connection and the edge proxy returns a generic 503. Now panics are caught, logged, and returned as 500 with the panic message. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: address second-round review — transactional delete, overflow, error logging - C1: Wrap PostgreSQL delete_user() in a transaction so partial cleanup can't leave users in a half-deleted state - M2: Add job_events to delete cleanup (both backends) — FK to agent_jobs without CASCADE would cause FK violation - H1/M4: Cap expires_in_days to 36500 before i64 cast (tokens + secrets) - H2: Validate target user exists before creating admin token to prevent orphan tokens on libSQL - H3: Log DB errors in DbAuthenticator::authenticate() instead of silently swallowing them as 401 Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: revert to rustls with webpki-roots fallback for PostgreSQL TLS native-tls/OpenSSL caused silent crashes (segfaults in C code) during DB writes on Railway containers. Switch back to rustls but add webpki-roots as a fallback when system certs are missing, which was the original TLS handshake failure on slim container images. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * chore: update Cargo.lock for rustls + webpki-roots Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * debug: add /api/debug/db-write endpoint to diagnose user insert failure Temporary diagnostic endpoint that tests DB INSERT to users table with full error logging. No auth required. Will be removed after debugging. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * perf: use cargo-chef in Dockerfile for dependency caching Splits the build into planner/deps/builder stages. Dependencies are only recompiled when Cargo.toml or Cargo.lock change. Source-only changes skip straight to the final build stage. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * debug: add tracing to users_create_handler Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: guard created_by FK in user creation handler The auth identity user_id (from owner_id scope) may not match any user row in the DB, causing a FK violation on the created_by column. Check that the referenced user exists before setting created_by. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * refactor: collapse GATEWAY_USER_ID into IRONCLAW_OWNER_ID Remove the separate GATEWAY_USER_ID config. The gateway now uses IRONCLAW_OWNER_ID (config.owner_id) directly for auth identity, bootstrap user creation, and workspace scoping. Previously, with_owner_scope() rebinds the auth identity to owner_id while keeping default_sender_id as the gateway user_id. This caused a FK constraint violation when creating users because the auth identity ("default") didn't match any user in the DB ("nearai"). Changes: - Remove GATEWAY_USER_ID env var and gateway_user_id from settings - Remove user_id field from GatewayConfig - Add owner_id parameter to GatewayChannel::new() - Remove with_owner_scope() method - Remove default_sender_id from GatewayState - Remove sender override logic in chat/approval handlers - Remove debug endpoint and tracing from prior debugging - Update all tests and E2E fixtures Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: hide Users tab for non-admins, remove auth hint text - Fetch /api/profile after login and hide the Users settings tab when the user's role is not admin - Remove the "Enter the GATEWAY_AUTH_TOKEN" hint from the login page since tokens are now managed via the admin panel, not .env files Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: address review feedback (auth 503, token expiry, CORS PATCH) - DB auth errors now return 503 instead of 401 so outages are distinguishable from invalid tokens (serrrfirat H3) - Cap expires_in_days to 36500 before i64 cast to prevent negative duration from u64 overflow (serrrfirat H1) - Add PATCH to CORS allowed methods for profile/user update endpoints (Copilot) - Stop leaking panic details in CatchPanicLayer response body Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: harden multi-tenant isolation — review fixes from #1614 - Add conversation ownership checks in TenantScope: add_conversation_message, touch_conversation, list_conversation_messages (+ paginated), update_conversation_metadata_field, get_conversation_metadata now return NotFound for conversations not owned by the tenant (cross-tenant data leak) - Fix multi-user heartbeat: clear notify_user_id per runner so notifications persist to the correct user, not the shared config target - Move hygiene tasks into bounded JoinSet instead of unbounded tokio::spawn - Revert send_notification to private visibility (only used within module) - Use effective_model_name() for cost attribution in dispatcher so providers that ignore per-request model overrides report the actual model used - Fix inject_model_override doc comment; add 3 unit tests - Fix heartbeat doc comment ("routines" not "active routines") Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * feat: add Jobs, Cost, Last Active columns to admin Users table Add UserSummaryStats struct and user_summary_stats() batch query to the UserStore trait (both PostgreSQL and libSQL backends). The admin users list endpoint now fetches per-user aggregates (job count, total LLM spend, most recent activity) in a single query and includes them inline in the response. The frontend Users table displays three new columns. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: address review comments and CI formatting failures CI fixes: - cargo fmt fixes in cli/mod.rs and db/tls.rs Security/correctness (from Copilot + serrrfirat + pranavraja99 reviews): - Token create: reject expires_in_days > 36500 with 400 instead of silent clamp - Token create: return 404 when admin targets non-existent user - User create: map duplicate email constraint violations to 409 Conflict - User create: remove unnecessary DB roundtrip for created_by (use AdminUser directly) - DB auth: log warn on DB lookup failures instead of silently swallowing errors - libSQL: add FK constraints on users.created_by and api_tokens.user_id Config fixes: - agent.multi_tenant: resolve from AGENT_MULTI_TENANT env var instead of hardcoding false - heartbeat.multi_tenant: fix doc comment to match actual env-var-based behavior UI fix: - showTokenBanner: pass correct title ("Token created!" vs "User created!") Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: address remaining review comments (round 2) - Secrets handlers: normalize name to lowercase before store operations, validate target user_id exists (returns 404 if not found) - libSQL: propagate cost parsing errors instead of unwrap_or_default() in both user_usage_stats and user_summary_stats - users_list_handler: propagate user_summary_stats DB errors (was silently swallowed with unwrap_or_default) - loadUsers: distinguish 401/403 (admin required) from other errors - Docs: fix users.id type (TEXT not UUID), remove "invitation flow" from V14 migration comment Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * feat: i18n for Users tab, atomic user+token creation, transactional delete_user i18n: - Add 31 translation keys for all Users tab strings (en + zh-CN) - Wire data-i18n attributes on HTML elements (headings, buttons, inputs, table headers, empty state) - Replace all hard-coded strings in app.js with I18n.t() calls Atomic user+token creation: - Add create_user_with_token() to UserStore trait - PostgreSQL: wraps both INSERTs in conn.transaction() with auto-rollback - libSQL: wraps in explicit BEGIN/COMMIT with ROLLBACK on error - Handler uses single atomic call instead of two separate operations Transactional delete_user for libSQL: - Wrap multi-table DELETE cascade in BEGIN/COMMIT transaction - ROLLBACK on any error to prevent partial cleanup / inconsistent state - Matches the PostgreSQL implementation which already used transactions Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: revert V14 migration to match deployed checksum [skip-regression-check] Refinery checksums applied migrations — editing V14__users.sql after it was already applied causes deployment failures. Revert the cosmetic comment changes (added in df40b22f) to restore the original checksum. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: bootstrap onboarding flow for multi-tenant users The bootstrap greeting and workspace seeding only ran for the owner workspace at startup, so new users created via the admin API never received the welcome message or identity files (BOOTSTRAP.md, SOUL.md, AGENTS.md, USER.md, etc.). Three fixes: - tenant_ctx(): seed per-user workspace on first creation via seed_if_empty(), which writes identity files and sets bootstrap_pending when the workspace is truly fresh - handle_message(): check take_bootstrap_pending() on the tenant workspace (not the owner workspace) and persist the greeting to the user's own assistant conversation + broadcast via SSE - WorkspacePool: seed new per-user workspaces in the web gateway so memory tools also see identity files immediately The existing single-user bootstrap in Agent::run() is preserved for non-multi-tenant deployments. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: address remaining PR review comments (round 3) - Docs: fix metadata description from "merge patch" to "full replacement" - Secrets: reject expires_in_days > 36500 with 400 (was silently clamped) - libSQL: CAST(SUM(cost) AS TEXT) in user_usage_stats and user_summary_stats to prevent SQLite numeric coercion from crashing get_text() — this was the root cause of the Copilot "SUM returns numeric type" comments - Add 3 regression tests: user_summary_stats (empty + with data) and user_usage_stats (multi-model aggregation) Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * feat: add role change support for users (admin/member toggle) - Add update_user_role() to UserStore trait + both backends (PostgreSQL and libSQL) - Extend PATCH /api/admin/users/{id} to accept optional "role" field with validation (must be "admin" or "member") - Add "Make Admin" / "Make Member" toggle button in Users table actions - Add i18n keys for role change (en + zh-CN) - Update API docs to document the role field on PATCH - Fix test helpers to use fmt_ts() for timestamps (was using SQLite datetime('now') which produces incompatible format for string comparison) Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: show live LLM spend in Users table instead of only DB-recorded costs [skip-regression-check] Chat turns record LLM cost in CostGuard (in-memory) but don't create agent_jobs/llm_calls DB rows — those are only written for background jobs. The Users table was querying only from DB, so it showed $0.00 for users who only chatted. Now supplements DB stats with CostGuard.daily_spend_for_user() — the same source displayed in the status bar token counter. Shows whichever is larger (DB historical total vs live daily spend). Also falls back to last_login_at for "Last Active" when no DB job activity exists. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: persist chat LLM calls to DB and fix usage stats query Two root causes for zero usage stats: 1. ChatDelegate only recorded LLM costs to CostGuard (in-memory) — never to the llm_calls DB table. Added DB persistence via TenantScope.record_llm_call() after each chat LLM call, with job_id=NULL and conversation_id=thread_id. 2. user_summary_stats query only joined agent_jobs→llm_calls, missing chat calls (which have job_id=NULL). Redesigned query to start from llm_calls and resolve user_id via COALESCE(agent_jobs.user_id, conversations.user_id) — covers both job and chat LLM calls. Both PostgreSQL and libSQL queries updated. TenantScope gets record_llm_call() method. Tests updated for new query semantics. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: address review comments — input validation, cost semantics, panic safety [skip-regression-check] - Validate display_name: trim whitespace, reject empty strings (create + update) - Validate metadata: must be a JSON object, return 400 if not (admin + profile) - secrets_list_handler: verify target user_id exists before listing - Cost display: use DB total directly (chat calls now persist to DB), remove confusing max(db,live) CostGuard fallback - CatchPanicLayer: truncate panic payload to 200 chars in log to limit potential sensitive data exposure Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: address Copilot round 5 — docs, secrets consistency, token name, provider field [skip-regression-check] - Docs: users.id note updated to "typically UUID v4 strings (bootstrap admin may use a custom ID)" - secrets_list_handler: return 503 when DB store is None (was falling through to list secrets without user validation) - tokens_create: trim + reject empty token name (matching display_name pattern) - LlmCallRecord.provider: use llm_backend ("nearai","openai") instead of model_name() which returns the model identifier - user_summary_stats zero-LLM users: acceptable — handler already falls back to 0 cost and last_login_at for missing entries Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: DB auth returns 503 on outage, scheduler counts only blocking jobs From serrrfirat review: - DB auth: return Err(()) on database errors so middleware returns 503 instead of silently returning Ok(None) → 401 (auth miss) - Scheduler: add parallel_blocking_count_for() that uses is_parallel_blocking() (Pending/InProgress/Stuck) instead of is_active() for per-user concurrency — Completed/Submitted jobs no longer count against MAX_JOBS_PER_USER From Copilot: - CLAUDE.md: fix secrets route paths from {id} to {user_id} - token_hash: use .as_slice() instead of .to_vec() to avoid heap allocation on every token auth/creation call Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: immediate auth cache invalidation on security-critical actions (zmanian review #6) Add DbAuthenticator::invalidate_user() that evicts all cached entries for a user. Called after: - Suspend user (immediate lockout, was 60s delay) - Activate user (immediate access restoration) - Role change (admin↔member takes effect immediately) - Token revocation (revoked token can't be reused from cache) The DbAuthenticator is shared (via Clone, which Arc-clones the cache) between the auth middleware and GatewayState, so handlers can evict entries from the same cache the middleware reads. Also from zmanian's review: - Items 1-5, 7-11 were already resolved in prior commits - Item 12 (String→enum for status/role) is deferred as a broader refactor Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: last-admin protection, usage stats for chat calls, UTF-8 safe panic truncation Last-admin protection: - Suspend, delete, and role-demotion of the last active admin now return 409 Conflict instead of succeeding and locking out the admin API - Helper is_last_admin() checks active admin count before destructive ops Usage stats: - user_usage_stats() now includes chat LLM calls (job_id=NULL) by joining via conversations.user_id, matching user_summary_stats() - Both PostgreSQL and libSQL queries updated Panic handler: - Use floor_char_boundary(200) instead of byte-index [..200] to prevent panic on multi-byte UTF-8 characters in panic messages Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: workspace seed race, bootstrap atomicity, email trim, secrets upsert response [skip-regression-check] - WorkspacePool: await seed_if_empty() synchronously after inserting into cache (drop lock first to avoid blocking), so callers see identity files immediately instead of racing a background task - Bootstrap admin: use create_user_with_token() for atomic user+token creation, matching the admin create endpoint - Email: trim whitespace, treat empty as None to prevent " " being stored and breaking uniqueness - Secrets PUT: report "updated" vs "created" based on prior existence - Last token_hash.to_vec() → .as_slice() in authenticate_token Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: disable unscoped webhook endpoint in multi-tenant mode [skip-regression-check] The original /api/webhooks/{path} endpoint looks up routines across all users. In multi-tenant mode, anyone who knows the webhook path + secret could trigger another user's routine. Now returns 410 Gone with a message pointing to the scoped endpoint /api/webhooks/u/{user_id}/{path}. Detection uses state.db_auth.is_some() — present only when DB-backed auth is enabled (multi-tenant). Single-user deployments are unaffected. From: standardtoaster review comment Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: webhook multi-tenant check, secrets error propagation, stale doc comment [skip-regression-check] - Webhook: use workspace_pool.is_some() instead of db_auth.is_some() for multi-tenant detection — db_auth is set for any DB deployment, workspace_pool is only set when has_any_users() was true at startup - Secrets: propagate exists() errors instead of unwrap_or(false) so backend outages surface as 500 rather than incorrect "created" status - Config: fix stale workspace_read_scopes comment referencing user_id Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> --------- Co-authored-by: Claude Opus 4.6 (1M context) <[email protected]> |
||
|
|
4c043bf057 |
feat: complete multi-tenant isolation — phases 2–4 (#1614)
* feat: complete multi-tenant isolation — per-user budgets, model selection, heartbeat cycling Finishes the remaining isolation work from phases 2–4 of #59: Phase 2 (DB scoping): Fix /status and /list commands to use _for_user DB variants instead of global queries that leaked cross-user job data. Phase 3 (Runtime isolation): Per-user workspace in routine engine's spawn_fire so lightweight routines run in the correct user context. Per-user daily cost tracking in CostGuard with configurable budget via MAX_COST_PER_USER_PER_DAY_CENTS. Multi-user heartbeat that cycles through all users with routines, auto-detected from GATEWAY_USER_TOKENS. Phase 4 (Provider/tools): Per-user model selection via preferred_model setting — looked up from SettingsStore on first iteration, threaded through ReasoningContext.model_override to CompletionRequest. Works with providers that support per-request model overrides (NearAI). Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: use selected_model setting key to match /model command persistence The dispatcher was reading "preferred_model" but the /model command (merged from staging) persists to "selected_model". Since set_setting is already per-user scoped, using the same key makes /model work as the per-user model override in multi-tenant mode. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: heartbeat hygiene, /model multi-tenant guard, RigAdapter model override Three follow-up fixes for multi-tenant isolation: 1. Multi-user heartbeat now runs memory hygiene per user before each heartbeat check, matching single-user heartbeat behavior. 2. /model command in multi-tenant mode only persists to per-user settings (selected_model) without calling set_model() on the shared LlmProvider. The per-request model_override in the dispatcher reads from the same setting. Added multi_tenant flag to AgentConfig (auto-detected from GATEWAY_USER_TOKENS). 3. RigAdapter now supports per-request model overrides by injecting the model name into rig-core's additional_params. OpenAI/Anthropic/Ollama API servers use last-key-wins for duplicate JSON keys, so the override takes effect via serde's flatten serialization order. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: address PR review — cost model attribution, heartbeat concurrency, pruning Fixes from review comments on #1614: - Cost tracking now uses the override model name (not active_model_name) when a per-user model override is active, for accurate attribution. - Multi-user heartbeat runs per-user checks concurrently via JoinSet instead of sequentially, preventing one slow user from blocking others. - Per-user failure counts tracked independently; users exceeding max_failures are skipped (matching single-user semantics). - per_user_daily_cost HashMap pruned on day rollover to prevent unbounded growth in long-lived deployments. - Doc comment fixed: says "routines" not "active routines". Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: /status ownership, model persistence scoping, heartbeat robustness Addresses second round of PR review on #1614: - /status <job_id> DB path now validates job.user_id == requesting user before returning data (was missing ownership check, security fix). - persist_selected_model takes user_id param instead of owner_id, and skips .env/TOML writes in multi-tenant mode (these are shared global files). handle_system_command now receives user_id from caller. - JoinSet collection handles Err(JoinError) explicitly instead of silently dropping panicked tasks. - Notification forwarder extracts owner_id from response metadata in multi-tenant mode for per-user routing instead of broadcasting to the agent owner. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: cost pricing, fire_manual workspace, heartbeat concurrency cap Round 3 review fixes: - Cost tracking passes None for cost_per_token when model override is active, letting CostGuard look up pricing by model name instead of using the default provider's rates (serrrfirat). - fire_manual() now uses per-user workspace, matching spawn_fire() pattern (serrrfirat). - Removed MULTI_TENANT env var — multi-tenant mode is auto-detected solely from GATEWAY_USER_TOKENS presence (serrrfirat + Copilot). - Multi-user heartbeat capped at 8 concurrent tasks to avoid flooding the LLM provider (serrrfirat + Copilot). - Fixed inject_model_override doc comment accuracy (Copilot). - Added comment explaining multi-tenant notification routing priority (Copilot). Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * feat: user-scoped webhook endpoint for multi-tenant isolation Adds POST /api/webhooks/u/{user_id}/{path} — a user-scoped webhook endpoint that filters the routine lookup by user_id, preventing cross-user webhook triggering when paths collide. The existing /api/webhooks/{path} endpoint remains unchanged for backward compatibility in single-user deployments. Changes: - get_webhook_routine_by_path gains user_id: Option<&str> param - Both postgres and libsql implementations add AND user_id = ? filter when user_id is provided - New webhook_trigger_user_scoped_handler extracts (user_id, path) from URL and passes to shared fire_webhook_inner logic - Route registered on public router (webhooks are called by external services that can't send bearer tokens) Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * feat: add TenantCtx for compile-time tenant isolation Implements zmanian's architectural proposal from #1614 review: two-tier scoped database access (TenantScope/AdminScope) so handler code cannot accidentally bypass tenant scoping. TenantScope (default): wraps user_id + Arc<dyn Database>, auto-binds user_id on every operation. ID-based lookups return None for cross- tenant resources. No escape hatch — forgetting to scope is a compile error. AdminScope (explicit opt-in): cross-tenant access for system-level components (heartbeat, routine engine, self-repair, scheduler, worker). TenantCtx bundles TenantScope + workspace + cost guard + per-user rate limiting. Constructed once per request in handle_message, threaded through all command handlers and ChatDelegate. Key changes: - New src/tenant.rs (~920 lines): TenantScope, AdminScope, TenantCtx, TenantRateState, TenantRateRegistry - All command handlers: user_id: &str → ctx: &TenantCtx - ChatDelegate: cost check/record/settings via self.tenant - System components: store field changed to AdminScope - Config: TENANT_MAX_LLM_CONCURRENT, TENANT_MAX_JOBS_CONCURRENT env vars - Fixes bug: /status <job_id> cross-tenant leak (now auto-filtered) Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> --------- Co-authored-by: Claude Opus 4.6 (1M context) <[email protected]> |
||
|
Henry ParkandGitHub
|
82822d7b25 |
fix: restore owner-scoped gateway startup (#1625)
* fix: restore owner-scoped gateway startup * fix: split gateway owner and sender scope * fix: keep multi-user gateway sender identity * test: cover gateway sender scope regression * test: harden e2e startup teardown race * fix: align gateway owner scope across auth modes |
||
|
|
5847479fd8 |
fix(agent): persist /model selection to .env, TOML, and DB (#1581)
* fix(agent): persist /model selection to .env, TOML, and DB The /model command only wrote selected_model to the DB and config.toml, but env vars from ~/.ironclaw/.env (e.g. NEARAI_MODEL) have the highest priority in LlmConfig::resolve_model(). The .env value was never updated, so it always shadowed the new model on restart. Now persist_selected_model updates all three persistence layers: 1. The backend-specific model env var in ~/.ironclaw/.env (only if the var already exists, to avoid injecting new vars) 2. The config.toml file (created if absent, since TOML > DB priority) 3. The DB settings table (for completeness) Also adds diagnostic logging when the DB store is unavailable. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix(agent): address PR review — backend from deps, exact .env match Review feedback: - Use resolved llm_backend from AgentDeps instead of re-reading from disk/env (fixes DB-only backend detection, eliminates redundant I/O) - Match .env var with exact "KEY=" prefix and skip commented lines (prevents false matches on NEARAI_MODEL_VERSION etc.) - TOML is now loaded once (no double-read for backend + model update) Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> --------- Co-authored-by: Claude Opus 4.6 (1M context) <[email protected]> |
||
|
|
b441ebec02 |
feat: multi-tenant auth with per-user workspace isolation (#1118)
* feat: multi-tenant auth with per-user scoping Multi-user authentication and authorization for IronClaw gateway: - Token-based auth mapping tokens to user IDs via GATEWAY_USER_TOKENS - Per-user SSE broadcast scoping - Per-user rate limiting with poisoned lock recovery - Handler auth and ownership checks for jobs, settings, routines - Extension secrets scoped per-user - Chat handlers use authenticated identity - Reverse proxy deployment documentation - Comprehensive integration tests for auth, SSE, rate limiting, and job isolation * fix: scope memory tools per-user in multi-tenant mode Memory tools (search, write, read, tree) held a single workspace created at startup with GATEWAY_USER_ID. In multi-tenant mode, all users' tool calls searched the default user's scope. Add WorkspaceResolver trait that resolves workspaces per-request using JobContext.user_id. In single-user mode, returns the startup workspace. In multi-tenant mode (GATEWAY_USER_TOKENS configured), creates and caches per-user workspaces on demand. Includes regression tests for workspace resolution and user isolation. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: comprehensive multi-tenant isolation audit Address all review findings from @serrrfirat plus 7 additional gaps found via full security audit: Reviewer findings (5): - WorkspacePool now applies search config, memory layers, embedding cache, identity read scopes, and global config scopes (was bare) - jobs_summary_handler uses per-user queries instead of global counters - jobs_prompt_handler restructured to not 404 agent jobs + ownership check - jobs_restart_handler agent branch now verifies user ownership - agent_job_summary_for_user added to Database trait + both backends Audit findings (7): - Delete dead handlers/memory.rs (stale copies with no auth) - Add AuthenticatedUser to logs_events, logs_level_get, logs_level_set - Add AuthenticatedUser to extensions_tools_handler, gateway_status_handler - Add auth + ownership checks to all 6 routines handlers - Add auth to all 4 skills handlers with audit logging on mutations - Scope extension setup SSE broadcast to user (broadcast_for_user) - Fix pre-existing test compilation errors in extensions/manager.rs 17 new multi-tenant isolation tests covering: - WorkspacePool config propagation and scope merging - Jobs handler per-user isolation (summary, restart, prompt, cancel) - Routines handler auth enforcement and cross-user rejection - Auth middleware enforcement on logs, skills, status endpoints Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: second-pass multi-tenant audit — scope SSE broadcasts, DB queries, dead handlers Second audit pass applying learned patterns across the codebase: - OAuth callback SSE broadcasts now use broadcast_for_user (lines 773, 912) - jobs_list_handler uses list_agent_jobs_for_user instead of fetching all users' jobs and filtering in Rust - list_agent_jobs_for_user added to Database trait + postgres + libsql - Dead handler files (extensions.rs, static_files.rs) hardened with AuthenticatedUser to prevent auth regression if migrated Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: address review findings — token hashing, broadcast scoping, error handling Security fixes: - Hash tokens with SHA-256 at construction time so authentication compares fixed-size 32-byte digests, eliminating length-oracle timing leaks - Scope auth SSE broadcasts per-user in chat_auth_token_handler — AuthRequired/AuthCompleted events were leaking across tenants - Propagate DB errors in restart handlers instead of silently swallowing via `if let Ok(Some(...))` pattern Code quality: - Log SSE serialization failures instead of silently producing empty strings via unwrap_or_default() - Remove dead `pub type AuthState = MultiAuthState` alias - Replace `.unwrap()` with `Arc::clone(db)` in app.rs multi-tenant workspace setup (db is guaranteed Some in context, but unwrap violates project convention) - Fix telegram setup test to inject UserIdentity into request extensions (handler now requires AuthenticatedUser) - Add safety comments on test-only expect/unwrap calls for CI - Apply cargo fmt to fix pre-existing formatting Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix: address review findings — unify workspace pool, fix SSE regression, cache job owners - Unify WorkspacePool and PerUserWorkspaceResolver: WorkspacePool now implements WorkspaceResolver, eliminating duplicate per-user workspace construction logic. app.rs uses WorkspacePool directly. - Fix sse_tx: None scheduler regression: change scheduler/worker SSE broadcasting from broadcast::Sender<SseEvent> to Arc<SseManager>, restoring SSE event delivery for scheduled agent jobs. - Cache job owner in orchestrator: add job_owner_cache to OrchestratorState so job_event_handler avoids a DB round-trip on every event after the first per job. - Deduplicate ext_user_id computation in main.rs. - Remove unused _gateway_state variable. - Fix pre-existing test: first_token() returns None in multi-user mode by design; align test assertion. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * style: fix formatting in app.rs Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * refactor: extract memory handlers back into handlers/memory.rs Move memory API handlers out of server.rs into their own module, consistent with how jobs, routines, and skills handlers are organized. The resolve_workspace() helper moves with them since it is only used by memory handlers. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> --------- Co-authored-by: Claude Opus 4.6 (1M context) <[email protected]> Co-authored-by: [email protected] <[email protected]> |
||
|
|
6d847c6009 |
feat(webhooks): add public webhook trigger endpoint for routines (#736)
* feat(webhooks): add public webhook trigger endpoint for routines
Add POST /api/webhooks/{path} endpoint that matches incoming webhooks
against routines with Trigger::Webhook, validates secrets using
constant-time comparison (subtle crate), and fires the matched routine
through the message pipeline.
Closes #651
Co-Authored-By: Claude Opus 4.6 <[email protected]>
* fix(webhooks): address PR review feedback - access control, targeted query, rate limiting
[skip-regression-check]
Co-Authored-By: Claude Opus 4.6 <[email protected]>
* fix(ci): add missing webhook_rate_limiter field and fix formatting
Add the webhook_rate_limiter field to the GatewayState initializer in
gateway_workflow_harness.rs and fix rustfmt formatting for the webhook
tuple in types.rs.
Co-Authored-By: Claude Opus 4.6 <[email protected]>
* fix(security): require webhook secret, add rate limiting, improve tests
Extract validate_webhook_secret() from the handler so the security-critical
secret validation logic (mandatory secret, constant-time comparison) is
directly testable without mocking the database layer. Improves the error
message for misconfigured routines to guide users toward the fix.
Replaces the previous unit tests (which only tested Rust pattern matching
and status code constants) with tests that exercise the actual validation
function against all rejection paths: missing secret (403), non-webhook
trigger (403), wrong secret (401), empty secret (401), and different-length
secret (401).
Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]>
* Route webhook triggers through RoutineEngine instead of chat pipeline
Adds fire_webhook() to RoutineEngine and updates the webhook handler
to use it. This ensures webhook-triggered routines get proper run
tracking, guardrail enforcement (cooldown + max_concurrent),
notifications, and FullJob dispatch support.
Co-Authored-By: Claude Opus 4.6 <[email protected]>
* style: fix formatting in webhook handler
Co-Authored-By: Claude Opus 4.6 <[email protected]>
---------
Co-authored-by: Claude Opus 4.6 <[email protected]>
Co-authored-by: [email protected] <[email protected]>
|
||
|
|
455f543ba5 |
fix(routines): surface errors when sandbox unavailable for full_job routines (#769)
* feat(db): add list_dispatched_routine_runs to RoutineStore trait Add method to query routine runs with status='running' AND job_id IS NOT NULL, enabling the routine engine to sync completion status from background jobs. Implements for both PostgreSQL and libSQL backends. [skip-regression-check] Co-Authored-By: Claude Opus 4.6 <[email protected]> * fix(routines): sync dispatched full-job runs with background job status (#697) Full-job routines were immediately marked Ok on dispatch, so failures/completions were never reflected in the routine run record. Now dispatch returns Running status, and a periodic sync checks linked jobs to update the run when the job completes, fails, or is cancelled. Co-Authored-By: Claude Opus 4.6 <[email protected]> * fix(routines): fail fast when sandbox unavailable at dispatch time (#697) Thread sandbox_available bool from Docker detection through AgentDeps to RoutineEngine. Full-job routines now fail immediately with a clear error message when sandbox is enabled but Docker is not available, instead of dispatching a job that silently fails. Co-Authored-By: Claude Opus 4.6 <[email protected]> * feat(startup): notify user when sandbox unavailable (#697) When sandbox is enabled but Docker is not installed or not running, send a user-visible warning through all channels at startup (with a 2s delay to let channels connect). Previously this was only logged via tracing::warn, invisible to TUI/web users. Co-Authored-By: Claude Opus 4.6 <[email protected]> * style: fix formatting in routine_engine.rs Co-Authored-By: Claude Opus 4.6 <[email protected]> * fix(tests): set sandbox_available=true in test rig for full_job traces Test rig doesn't use real Docker — full_job routines execute via trace replay. Setting sandbox_available=true allows the routine_news_digest trace test to dispatch full_job routines as before. Co-Authored-By: Claude Opus 4.6 <[email protected]> * fix(routines): address review feedback on sync_dispatched_runs (#697) - Sanitize last_reason from job transitions before using in notifications (truncate to 500 chars, strip control characters) - Treat Submitted as in-progress (can still transition to Failed), only Completed and Accepted are terminal success states - Add test for sanitize_summary Co-Authored-By: Claude Opus 4.6 <[email protected]> * fix(tests): add missing sandbox_available field to test constructors Staging added sandbox_available to AgentDeps and RoutineEngine::new. Add the missing field/argument in test files to fix CI compilation. Co-Authored-By: Claude Opus 4.6 <[email protected]> * fix: sanitize job reason in notifications, fix state handling for Submitted/Accepted - Enhance sanitize_summary to strip HTML tags and collapse whitespace, preventing injection via untrusted container job reasons - Use char-boundary-safe truncation to avoid panics on multi-byte strings - Treat Submitted and Accepted as in-progress states (continue polling) rather than terminal success, since they can still transition to Failed - Increase channel-connect delay from 2s to 5s and add debug log for sandbox-unavailable warning delivery Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * Replace sandbox_available bool with SandboxReadiness enum Distinguishes DisabledByConfig from DockerUnavailable so full-job routine errors give actionable guidance instead of a generic message. Co-Authored-By: Claude Opus 4.6 <[email protected]> * ci: re-trigger CI with latest changes Co-Authored-By: Claude Opus 4.6 <[email protected]> * fix: add missing owner_id arg to send_notification call Co-Authored-By: Claude Opus 4.6 <[email protected]> * fix: update e2e tests to use SandboxReadiness enum Co-Authored-By: Claude Opus 4.6 <[email protected]> --------- Co-authored-by: Claude Opus 4.6 <[email protected]> Co-authored-by: [email protected] <[email protected]> |
||
|
|
3dcccc1e64 |
feat(self-repair): wire stuck_threshold, store, and builder (#712)
* feat(self-repair): wire stuck_threshold, store, and builder (#647) Wire the previously dead-code fields in DefaultSelfRepair: - stuck_threshold: detect_stuck_jobs() now filters by duration, only reporting jobs stuck longer than the configured threshold - with_store(): wired in agent_loop.rs from AgentDeps.store for tool failure tracking via Database trait - with_builder(): wired from register_builder_tool() return value through AppComponents and AgentDeps for automatic tool rebuilding - tools: passed alongside builder for hot-reload logging Remove all #[allow(dead_code)] annotations. Add regression tests for threshold-based filtering (both above and below threshold). Co-Authored-By: Claude Opus 4.6 <[email protected]> * fix: add missing `builder` field to AgentDeps in gateway workflow harness After rebase onto staging, AgentDeps gained a `builder` field for self-repair tool rebuilding. The gateway workflow test harness was missing this field, causing CI compilation failure. Co-Authored-By: Claude Opus 4.6 <[email protected]> * ci: retrigger CI * fix: force CI refresh after path_routing_tests dedup * test: add E2E test for stuck job repair and tool rebuild cycle Tests the full self-repair flow requested in review: 1. Job transitions Pending -> InProgress -> Stuck 2. detect_stuck_jobs() finds it (zero threshold) 3. repair_stuck_job() recovers it back to InProgress 4. A broken tool is repaired via MockBuilder 5. Verify builder was invoked and repair succeeded Uses a MockBuilder (impl SoftwareBuilder) that returns successful BuildResult without requiring an LLM or filesystem. Uses libsql test database for the store (increment_repair_attempts, mark_tool_repaired). Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix(self-repair): measure stuck_duration from Stuck transition, not started_at - Use ctx.transitions to find the most recent Stuck transition timestamp instead of ctx.started_at (which reflects job start, not stuck time) - Fix StuckJob.last_activity to use stuck transition timestamp - Remove misleading "hot-reloaded into registry" log - Remove stray "// ci fix" comment in memory.rs - Add regression test: backdated started_at must not inflate stuck_duration Co-Authored-By: Claude Opus 4.6 <[email protected]> * ci: re-trigger CI with latest changes Co-Authored-By: Claude Opus 4.6 <[email protected]> * fix: add type annotation to Ok(()) in test to resolve E0282 Co-Authored-By: Claude Opus 4.6 <[email protected]> --------- Co-authored-by: Claude Opus 4.6 <[email protected]> |
||
|
|
4566181f40 |
feat(gateway): unified settings page with subtabs (#1191)
* feat(gateway): full settings page polish with all tiers - Backend: add ActiveConfigSnapshot to expose resolved LLM backend, model, and enabled channels via /api/gateway/status - Add missing Agent settings (daily cost cap, actions/hour, local tools) - Add Sandbox, Routines, Safety, Skills, and Search setting groups - Settings import/export (JSON download + file upload) - Active env defaults shown as placeholders in Inference settings - Styled confirmation modals replace window.confirm() for remove actions - Global restart banner persists across settings subtab switches - Client-side validation with min/max constraints on number inputs - Accessibility: aria-label on inputs, role=status on save indicators - Settings search filters rows across current subtab - Smooth CSS transitions for conditional field visibility (showWhen) - Tunnel settings in Channels subtab - Mobile responsive settings layout at 768px breakpoint - i18n keys for toolbar, search, and import/export in en + zh-CN Co-Authored-By: Claude Opus 4.6 <[email protected]> * feat(gateway): polish settings page and remove registered tools debug section Remove the "Registered Tools" table from the extensions tab (debug info not useful to end users), clean up associated CSS/i18n/JS. Additional settings page UI polish: extension card state styling, layout refinements. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix(gateway): address PR review feedback [skip-regression-check] - Use refreshCurrentSettingsTab() in SSE event handlers to reduce duplication - Remove unused formatGroupName/formatSettingLabel helpers - Use i18n keys for MCP Configure/Reconfigure buttons - Add data-i18n-placeholder to settings search input - Remove data-i18n from confirm modal button (set dynamically by showConfirmModal) - Fix cargo fmt in main.rs Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix(e2e): update tests for unified settings tab layout [skip-regression-check] - Update TABS list: replace extensions/skills with settings - Add settings_subtab/settings_subpanel selectors to helpers - Update test_connection, test_skills, test_extensions, test_wasm_lifecycle to navigate via Settings > subtab instead of top-level tabs - Move MCP card tests to use go_to_mcp() helper (MCP is now a separate subtab) - Remove tools table tests and mock_ext_apis tools= parameter - Fix CSP violation: replace inline onclick on confirm modal cancel button Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix(gateway): address second round of PR review feedback [skip-regression-check] - Use I18n.t() for MCP empty state, export/import toasts, confirm modal - Fix CLI channel card using wrong channel key ('repl' -> 'cli') - Fix settings search counting hidden rows as visible - Add aria-label i18n for settings search input - Add common.loadFailed i18n key (en + zh-CN) - Update E2E tests: WASM channel tests use Channels subtab, remove tests use custom confirm modal instead of window.confirm Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix(e2e): fix WASM channel card selector and skills remove confirm [skip-regression-check] - WASM channel tests: filter by display name to avoid matching built-in channel cards in the Channels subtab - Skills remove test: click confirm modal button instead of using window.confirm (skill removal now uses custom confirm modal) Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix(gateway): address third round of PR review feedback [skip-regression-check] - approval_needed SSE: refresh any active settings subtab, not just Extensions — approvals can surface from Channels/MCP setup flows too - renderCardsSkeleton: remove nested .extensions-list wrapper that caused skeleton cards to render constrained inside grid cells Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix(e2e): fix auth_completed reload test race condition [skip-regression-check] Use expect_response to deterministically wait for the /api/extensions reload triggered by handleAuthCompleted → refreshCurrentSettingsTab, instead of a fixed 600ms sleep that was too short under CI load. Also remove stale /api/extensions/tools route handler. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix(e2e): debug auth_completed reload test with function counter [skip-regression-check] Inject a counter wrapper around refreshCurrentSettingsTab to verify it's actually called, and wait for the async fetch to complete before asserting the reload count. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * feat(gateway): localize all settings labels, descriptions, and channel cards [skip-regression-check] Move 120+ hardcoded strings in settings definitions (INFERENCE_SETTINGS, AGENT_SETTINGS, NETWORKING_SETTINGS) and channel card labels to i18n keys. Render functions now resolve labels via I18n.t() so the settings page translates when switching locales. Covers: group titles, setting labels/descriptions, built-in channel names/descriptions, and the "No settings found" empty state. Both en.js and zh-CN.js updated with all new cfg.* and channels.* keys. Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix(gateway): localize remaining hardcoded UI strings [skip-regression-check] - Fix export error toast using wrong i18n key (importFailed → exportFailed) - Replace "Failed to load settings:" with I18n.t('common.loadFailed') - Localize renderBuiltinChannelCard: "Built-in", "Active", "Inactive" - Localize settings placeholders: "env: ", "env default", "use env default" - Localize "✓ Saved" indicator - Add new i18n keys to both en.js and zh-CN.js Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix(gateway): confirm modal a11y, Esc/click-outside, search guard [skip-regression-check] - Add role="dialog", aria-modal="true", aria-labelledby to confirm modal - Focus confirm button when modal opens - Close modal on Escape key or overlay click - Skip settings search on non-settings panels (Extensions/MCP/Skills/Channels) Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix(gateway): boolean tri-state, search reset on subtab switch, stale model suggestions [skip-regression-check] Address PR review feedback: - Boolean settings now use a tri-state select (env default / On / Off) instead of a checkbox, matching the pattern used by other select settings and allowing users to revert to the env default - Clear search input when switching settings subtabs so stale filters don't carry over to the new panel - Always assign model suggestions (even empty array) so stale IDs from a previous successful /v1/models fetch don't persist when the endpoint later returns empty Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> * fix(gateway): auth_completed handler, bedrock_cross_region select, integer-only number inputs [skip-regression-check] Address PR review feedback: - auth_completed SSE listener now delegates to handleAuthCompleted(data) instead of inlining logic with a bare closeConfigureModal() call, so only the matching extension's modal is dismissed - bedrock_cross_region changed from free text to select with the four valid values (us/eu/apac/global), matching backend validation - Number settings now use step=1 and parseInt() instead of parseFloat(), preventing fractional values that the backend (u32/u64) would reject Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> --------- Co-authored-by: Claude Opus 4.6 <[email protected]> |
||
|
Henry ParkandGitHub
|
878a67cdb6 |
Refactor owner scope across channels and fix default routing fallback (#1151)
* refactor: add explicit owner scope across channels * fix: tighten routine owner target routing * fix: address owner scope review feedback * Fix owner-scope onboarding and event trigger isolation * Tighten routing fallback and wizard owner validation * fix: address owner-scope follow-up review * fix: tighten owner-scope follow-up details * fix: import Channel trait in telegram test * fix: normalize http webhook sender ids * fix: address remaining owner-scope review issues * fix: reconcile config rebase fallout * fix: reconcile extension manager rebase drift * fix: address current copilot review regressions * fix: restore clippy matrix after rebase |
||
|
ZeroTrustandGitHub
|
1b59eb6b39 |
feat: Reuse Codex CLI OAuth tokens for ChatGPT backend LLM calls (#693)
* feat: add Codex auth.json token reuse for LLM authentication When LLM_USE_CODEX_AUTH=true, IronClaw reads the Codex CLI's auth.json (default ~/.codex/auth.json) and extracts the API key or OAuth access token. This lets IronClaw piggyback on a Codex login without implementing its own OAuth flow. New env vars: - LLM_USE_CODEX_AUTH: enable Codex auth fallback (default: false) - CODEX_AUTH_PATH: override path to auth.json * fix: handle ChatGPT auth mode correctly Switch base_url to chatgpt.com/backend-api/codex when auth.json contains ChatGPT OAuth tokens. The access_token is a JWT that only works against the private ChatGPT backend, not the public OpenAI API. Refactored codex_auth.rs to return CodexCredentials (token + is_chatgpt_mode) instead of just a string key. * fix: Codex auth takes highest priority over secrets store When LLM_USE_CODEX_AUTH=true, Codex credentials are now loaded before checking env vars or the secrets store overlay. Previously the secrets store key (injected during onboarding) would shadow the Codex token. * feat: Responses API provider for ChatGPT backend - New CodexChatGptProvider speaks the Responses API protocol - Auto-detects model from /models endpoint (gpt-4o -> gpt-5.2-codex) - Adds store=false (required by ChatGPT backend) - Error handling with timeout for HTTP 400 responses - Message format translation: Chat Completions -> Responses API - SSE response parsing for text, tool calls, and usage stats - 7 unit tests for message conversion and SSE parsing * fix: SSE parser uses item_id instead of call_id for tool call deltas The Responses API sends function_call_arguments.delta events with item_id (e.g. fc_...) not call_id (e.g. call_...). The parser now keys pending tool calls by item_id from output_item.added and tracks call_id separately for result matching. * fix: strip empty string values from tool call arguments gpt-5.2-codex fills optional tool parameters with empty strings (e.g. timestamp: ""), which IronClaw's tool validation rejects. Strip them before passing to tool execution. * fix: prevent apiKey mode fallback to ChatGPT token When auth_mode is explicitly 'apiKey' but the key is missing/empty, do not fall through to check for a ChatGPT access_token. This prevents returning credentials with is_chatgpt_mode: true and routing to the wrong LLM provider. * refactor: reuse single reqwest::Client across model discovery and LLM calls Create Client once in with_auto_model, pass &Client to fetch_default_model, and move it into the provider struct. Eliminates the redundant Client::new() that wasted a connection pool. * fix: bump client_version to 1.0.0 to unlock gpt-5.3-codex and gpt-5.4 The /models endpoint gates newer models behind client_version. Version 0.1.0 only returns up to gpt-5.2-codex, while 1.0.0+ also returns gpt-5.3-codex and gpt-5.4. * feat: user-configured LLM_MODEL takes priority over auto-detection Fetch the full model list from /models endpoint. If LLM_MODEL is set, validate it against the supported list and warn with available models if not found. If LLM_MODEL is not set, auto-detect the highest-priority model. Also bumps client_version to 1.0.0 to unlock gpt-5.3/5.4. * fix: add 10s timeout to model discovery HTTP request Prevents startup from blocking indefinitely if chatgpt.com is slow or unreachable. Uses reqwest per-request timeout. * docs: add private API warning for ChatGPT backend endpoint The chatgpt.com/backend-api/codex endpoint is private and undocumented. Add warning in module docs and a runtime log on first use to inform users of potential ToS implications. * feat: implement OAuth 401 token refresh for Codex ChatGPT provider On HTTP 401, if a refresh_token is available, the provider now automatically refreshes the access token via auth.openai.com/oauth/token (same protocol as Codex CLI) and retries the request once. Refreshed tokens are persisted back to auth.json. Changes: - codex_auth: read refresh_token, add refresh_access_token() and persist_refreshed_tokens() - codex_chatgpt: RwLock for api_key, 401 detection + retry in send_request, send_http_request helper - config/llm: thread refresh_token/auth_path through RegistryProviderConfig - llm/mod: pass refresh params to with_auto_model * refactor: lazy model detection via OnceCell, remove block_in_place Model is no longer resolved during provider construction. Instead, resolve_model() uses tokio::sync::OnceCell to lazily fetch from /models on the first LLM call. This eliminates the block_in_place + block_on workaround in create_codex_chatgpt_from_registry. - with_auto_model (async) -> with_lazy_model (sync constructor) - resolve_model() added with OnceCell-based lazy init - build_request_body takes model as parameter - model_name() returns resolved or configured_model as fallback * feat: support multimodal content (images) in Codex ChatGPT provider message_to_input_items now checks content_parts for user messages. ContentPart::Text maps to input_text and ContentPart::ImageUrl maps to input_image, matching the Responses API format used by Codex CLI. Falls back to plain text when content_parts is empty. Also updates client_version to 0.111.0 for /models endpoint. Adds test: test_message_conversion_user_with_image * refactor: move codex_auth module from src/ to src/llm/ codex_auth is only used by the LLM layer (codex_chatgpt provider and config/llm). Moving it under src/llm/ reflects its actual scope. - Remove pub mod codex_auth from lib.rs - Add pub mod codex_auth to llm/mod.rs - Update imports: super::codex_auth, crate::llm::codex_auth * Fix codex provider style issues * Use SecretString throughout codex auth refresh flow * Use SecretString for codex access tokens * Reuse provider client for codex token refresh * Stream Codex SSE responses incrementally * Fix Windows clippy and SQLite test linkage * Trigger checks after regression skip label * Tighten codex auth module handling |
||
|
|
f05896fe6a |
Migrate GitHub webhook normalization into github tool (#758)
* Add event-triggered routines and workflow skill templates * Add generic host-verified webhook ingress for tools * Migrate GitHub webhook normalization into github tool * Bump github tool registry version * Stabilize trace E2E test rig and approval behavior * Add reusable gateway workflow harness with mock LLM server (#762) * Add reusable gateway workflow test harness with mock LLM server * Fix clippy issues in workflow harness * Stabilize trace E2E test rig and approval behavior * Address PR review feedback on gateway workflow harness - Extract shared TestChannelHandle into test_channel.rs with name override support, eliminating ~55 lines of duplication between test_rig.rs and gateway_workflow_harness.rs - Remove redundant RoutineEngine creation that was immediately overwritten by Agent::run() - Replace flaky sleep(500ms) with polling loop for routine run count check - Use components.context_manager instead of creating a fresh ContextManager for job tools, ensuring agent and tools share the same instance Co-Authored-By: Claude Opus 4.6 <[email protected]> * Fix import ordering in gateway_workflow_harness Co-Authored-By: Claude Opus 4.6 <[email protected]> --------- Co-authored-by: Claude Opus 4.6 <[email protected]> * Address PR #758 review feedback - Fix header_value to use fully case-insensitive lookup (iterate with to_ascii_lowercase) instead of checking only exact/lower/upper variants - Change comment_id from u32 to u64 to handle GitHub's billion-range IDs - Remove handle_webhook from LLM-facing JSON schema to prevent direct invocation bypassing HMAC verification - Rename enrichment keys from repository/sender to repository_name/ sender_login to preserve original JSON objects in webhook payloads - Remove put_string_normalized helper (no longer needed) - Replace no-op tests (test_validate_event_in_create_pr_review, test_validate_merge_method) with test_header_value_case_insensitive - Add README docs for 6 undocumented actions (list_issue_comments, create_issue_comment, list_pull_request_comments, reply_pull_request_comment, get_pull_request_reviews, get_combined_status) - Add comment explaining max_tool_calls <= 8 bound in e2e test - Fix gateway workflow harness: add webhook_capability with secret auth to MockGithubWebhookTool, matching staging's hardened webhook security - Fix merge artifacts: remove duplicate test function, orphaned code fragment in e2e_routine_heartbeat [skip-regression-check] Co-Authored-By: Claude Opus 4.6 <[email protected]> * Fix formatting in gateway workflow harness Co-Authored-By: Claude Opus 4.6 <[email protected]> * Address Copilot review: filter keys, pr_number fallback, feature gate, version alignment - Update SKILL.md and workflow-routines.md templates to use `repository_name` and `sender_login` (matching enriched payload field names) - Mark webhook HMAC secret as required in SKILL.md prerequisites - Fall back to `/issue/number` for `pr_number` on issue_comment PR webhooks - Gate `gateway_workflow_harness` module behind `#[cfg(feature = "libsql")]` - Align tool version to 0.2.1 in Cargo.toml and capabilities.json Co-Authored-By: Claude Opus 4.6 <[email protected]> --------- Co-authored-by: Claude Opus 4.6 <[email protected]> |