Felix Fietkau f450659334 mt76x2: improve gain adjustment in noisy environments ...

When switching between low gain (high RSSI) and high gain settings, it
can take a few seconds to adjust to the current environment.
This can lead to short periods of time with extreme packet loss.

When switching from low_gain=1 to low_gain=2, start with the same gain
adjustment value instead of the lowest to avoid spikes of huge numbers
of false CCA events

Also avoid resetting adjustment values on switching between low_gain
values 0 and 1, since it affects only the upper limit of vga adjustment

Signed-off-by: Felix Fietkau <[email protected]>

2018-06-18 12:27:02 +02:00

firmware

update MT7628 firmware to the latest version

2018-05-19 10:52:29 +02:00

.gitignore

add .gitignore

2015-12-13 17:54:16 +01:00

agg-rx.c

mt76: add rcu locking in tid reorder function

2018-04-14 21:48:35 +02:00

debugfs.c

mt76: add led active low to debugfs

2018-04-09 11:34:04 +02:00

dma.c

mt76: wait for pending tx to complete before switching channel

2018-05-20 07:57:25 +02:00

dma.h

update my email address

2016-09-04 17:33:28 +02:00

eeprom.c

revert mt76_eeprom_override call reordering

2017-02-03 14:25:08 +01:00

mac80211.c

mt76: wait for pending tx to complete before switching channel

2018-05-20 07:57:25 +02:00

Makefile

mt76: implement A-MPDU rx reordering in the driver code

2018-01-22 10:43:21 +01:00

mmio.c

core: rename register trace events to avoid conflict with mt7601u

2016-09-05 11:29:58 +02:00

mt76.h

mt76: wait for pending tx to complete before switching channel

2018-05-20 07:57:25 +02:00

mt76x2_core.c

mt76x2: add hw radar detector

2016-09-25 18:13:12 +02:00

mt76x2_debugfs.c

mt76x2: add a debugfs file to dump agc calibration information

2018-06-15 19:12:14 +02:00

mt76x2_dfs.c

mt76x2: dfs: take into account dfs region in mt76x2_dfs_init_params()

2018-01-18 19:06:53 +01:00

mt76x2_dfs.h

mt76x2: dfs: add set_domain handler

2018-01-18 19:06:30 +01:00

mt76x2_dma.c

mt76x2: fix WMM parameter configuration

2018-01-18 19:10:20 +01:00

mt76x2_dma.h

update my email address

2016-09-04 17:33:28 +02:00

mt76x2_eeprom.c

mt76x2: fix tx_alc_enabled check

2018-04-09 10:15:14 +02:00

mt76x2_eeprom.h

mt76x2: fix tx_alc_enabled check

2018-04-09 10:15:14 +02:00

mt76x2_init.c

mt76x2: fix tracking rssi for dynamic gain adjustment

2018-06-15 20:49:55 +02:00

mt76x2_mac.c

mt76x2: mac: consider multicast/broadcast frames in ewma rssi estimation

2018-06-18 12:09:16 +02:00

mt76x2_mac.h

mt76x2: make mt76x2_mac_reset routine static

2018-04-03 21:36:32 +02:00

mt76x2_main.c

mt76: prevent tx scheduling during channel change

2018-05-20 07:57:25 +02:00

mt76x2_mcu.c

mt76: use mt76_poll_msec routine in mt76pci_load_firmware()

2018-03-19 21:38:48 +01:00

mt76x2_mcu.h

mt76x2: init: add ma80211 led callbacks

2017-10-31 10:22:15 +01:00

mt76x2_pci.c

mt76x2: Add PCI identifier for MT7602

2017-11-01 09:10:00 +01:00

mt76x2_phy.c

mt76x2: improve gain adjustment in noisy environments

2018-06-18 12:27:02 +02:00

mt76x2_regs.h

mt76x2: add mac80211 {set,get}_antenna callbacks

2018-03-21 11:23:10 +01:00

mt76x2_trace.c

update my email address

2016-09-04 17:33:28 +02:00

mt76x2_trace.h

update my email address

2016-09-04 17:33:28 +02:00

mt76x2_tx.c

mt76: fix beacon timer drift

2018-05-18 17:46:01 +02:00

mt76x2.h

mt76x2: fix tracking rssi for dynamic gain adjustment

2018-06-15 20:49:55 +02:00

mt7603_beacon.c

mt7603: turn vif wcid entry back into a full mt7603_sta

2018-04-16 12:07:53 +02:00

mt7603_core.c

update my email address

2016-09-04 17:33:28 +02:00

mt7603_debugfs.c

update my email address

2016-09-04 17:33:28 +02:00

mt7603_dma.c

mt76: increase rx ring size for mt76x2

2017-11-16 16:26:45 +01:00

mt7603_eeprom.c

mt7603: support loading the entire EEPROM from OTP

2017-02-27 09:52:36 +01:00

mt7603_eeprom.h

update my email address

2016-09-04 17:33:28 +02:00

mt7603_init.c

mt76: move ieee80211_hw allocation to common core

2018-05-20 07:57:25 +02:00

mt7603_mac.c

mt7603: clear PSE reset bit if PSE reset fails

2018-05-20 07:57:25 +02:00

mt7603_mac.h

update my email address

2016-09-04 17:33:28 +02:00

mt7603_main.c

mt7603: do not hold dev->mutex while flushing dev->mac_work

2018-05-20 07:57:25 +02:00

mt7603_mcu.c

mt7603: mcu: fix potential NULL pointer dereferencing on failed allocation

2017-12-15 15:31:01 +01:00

mt7603_mcu.h

mt7603: mcu: fix indentation of mcu command definition

2017-09-25 20:25:12 +02:00

mt7603_pci.c

update my email address

2016-09-04 17:33:28 +02:00

mt7603_regs.h

mt7603: clean up dma debug reads

2017-12-02 11:11:58 +01:00

mt7603_soc.c

update my email address

2016-09-04 17:33:28 +02:00

mt7603.h

mt7603: retry PSE reset calls

2018-04-18 11:53:24 +02:00

trace.c

update my email address

2016-09-04 17:33:28 +02:00

trace.h

core: rename register trace events to avoid conflict with mt7601u

2016-09-05 11:29:58 +02:00

tx.c

mt76: only stop tx queues on offchannel, not during the entire scan

2018-05-20 07:57:25 +02:00

util.c

adjust MODULE_LICENSE for license change

2016-09-05 11:34:38 +02:00

util.h

move mt76_insert_hdr_pad to mt76x2_tx.c

2016-09-04 18:06:48 +02:00

S

Description

mac80211 driver for MediaTek MT76x0e, MT76x2e, MT7603, MT7615, MT7628 and MT7688

BSD-3-Clause

105 MiB

Languages

C 99.7%

Perl 0.2%

Makefile 0.1%