Felix Fietkau eba6b2a327 mt76x2: rework tx power handling ...

There were a number of issues in the existing tx power handling code:

1. The EEPROM target power for chain 0 refers to the actual output power
after the channel and bandwidth delta have been added to the initial
channel gain. This means the delta values should not be added/subtracted
for the rate power calculation

2. When power is reduced significantly, the initial channel gain
underflows very quickly, while the per-rate power offsets are high.
This miscalculation causes effective tx power to be increased when it
should actually be lowered.

Fix this by trying to adjust the channel gain to the lowest power from
the rate table. In case of under- or overflow, compensate by adding an
appropriate delta to the rate power values.

This makes power configuration more accurate on a wider range of
configurable values

Signed-off-by: Felix Fietkau <[email protected]>

2018-02-24 10:24:26 +01:00

firmware

mt7603: update firmware to version 20160107100755

2018-01-30 10:23:03 +01:00

.gitignore

add .gitignore

2015-12-13 17:54:16 +01:00

agg-rx.c

mt76: check qos ack policy before reordering packets

2018-01-30 10:35:37 +01:00

debugfs.c

debugfs: add support for changing the LED pin

2017-11-16 20:34:45 +01:00

dma.c

mt76: split mt76_rx_complete

2018-01-30 10:33:41 +01:00

dma.h

update my email address

2016-09-04 17:33:28 +02:00

eeprom.c

revert mt76_eeprom_override call reordering

2017-02-03 14:25:08 +01:00

mac80211.c

mt76: stop tx queues from the driver callback instead of common code

2018-02-09 16:05:51 +01:00

Makefile

mt76: implement A-MPDU rx reordering in the driver code

2018-01-30 10:33:40 +01:00

mmio.c

core: rename register trace events to avoid conflict with mt7601u

2016-09-05 11:29:58 +02:00

mt76.h

mt76: implement AP_LINK_PS

2018-01-30 10:35:36 +01:00

mt76x2_core.c

mt76x2: add hw radar detector

2016-09-25 18:13:12 +02:00

mt76x2_debugfs.c

mt76x2: debugfs: add dfs statistics to debugfs

2016-09-25 18:13:27 +02:00

mt76x2_dfs.c

mt76x2: dfs: take into account dfs region in mt76x2_dfs_init_params()

2018-01-30 10:23:03 +01:00

mt76x2_dfs.h

mt76x2: dfs: add set_domain handler

2018-01-30 10:23:03 +01:00

mt76x2_dma.c

mt76x2: fix WMM parameter configuration

2018-01-30 10:23:03 +01:00

mt76x2_dma.h

update my email address

2016-09-04 17:33:28 +02:00

mt76x2_eeprom.c

mt76x2: eeprom: fix typo in mt76x2_get_power_info_5g()

2018-01-30 10:23:03 +01:00

mt76x2_eeprom.h

mt76x2: initialize channel power limits

2017-12-03 21:45:43 +01:00

mt76x2_init.c

mt76: implement AP_LINK_PS

2018-01-30 10:35:36 +01:00

mt76x2_mac.c

mt76x2: do not set status->aggr for NULL data frames

2018-01-30 10:35:37 +01:00

mt76x2_mac.h

mt76x2: add functions for setting extended MAC address registers

2018-01-30 10:23:03 +01:00

mt76x2_main.c

mt76: stop tx queues from the driver callback instead of common code

2018-02-09 16:05:51 +01:00

mt76x2_mcu.c

mt76: fix memcpy to potential null pointer on failed allocation

2018-01-30 10:23:03 +01:00

mt76x2_mcu.h

mt76x2: init: add ma80211 led callbacks

2017-11-16 20:34:45 +01:00

mt76x2_pci.c

mt76x2: Add PCI identifier for MT7602

2017-11-16 20:34:45 +01:00

mt76x2_phy.c

mt76x2: rework tx power handling

2018-02-24 10:24:26 +01:00

mt76x2_regs.h

mt76x2: add functions for setting extended MAC address registers

2018-01-30 10:23:03 +01:00

mt76x2_trace.c

update my email address

2016-09-04 17:33:28 +02:00

mt76x2_trace.h

update my email address

2016-09-04 17:33:28 +02:00

mt76x2_tx.c

mt76x2: fix transmission of encrypted management frames

2017-12-03 21:45:43 +01:00

mt76x2.h

mt76: implement AP_LINK_PS

2018-01-30 10:35:36 +01:00

mt7603_beacon.c

mt76: pass the per-vif wcid to the core for multicast rx

2018-01-30 10:33:41 +01:00

mt7603_core.c

update my email address

2016-09-04 17:33:28 +02:00

mt7603_debugfs.c

update my email address

2016-09-04 17:33:28 +02:00

mt7603_dma.c

mt76: increase rx ring size for mt76x2

2017-11-16 20:34:45 +01:00

mt7603_eeprom.c

mt7603: support loading the entire EEPROM from OTP

2017-02-27 09:52:36 +01:00

mt7603_eeprom.h

update my email address

2016-09-04 17:33:28 +02:00

mt7603_init.c

mt76: implement AP_LINK_PS

2018-01-30 10:35:36 +01:00

mt7603_mac.c

mt7603: avoid reordering qos-null data packets

2018-02-09 16:05:51 +01:00

mt7603_mac.h

update my email address

2016-09-04 17:33:28 +02:00

mt7603_main.c

mt76: stop tx queues from the driver callback instead of common code

2018-02-09 16:05:51 +01:00

mt7603_mcu.c

mt7603: mcu: fix potential NULL pointer dereferencing on failed allocation

2018-01-30 10:23:03 +01:00

mt7603_mcu.h

mt7603: mcu: fix indentation of mcu command definition

2017-09-25 20:25:12 +02:00

mt7603_pci.c

update my email address

2016-09-04 17:33:28 +02:00

mt7603_regs.h

mt7603: clean up dma debug reads

2017-12-03 21:45:43 +01:00

mt7603_soc.c

update my email address

2016-09-04 17:33:28 +02:00

mt7603.h

mt76: implement AP_LINK_PS

2018-01-30 10:35:36 +01:00

trace.c

update my email address

2016-09-04 17:33:28 +02:00

trace.h

core: rename register trace events to avoid conflict with mt7601u

2016-09-05 11:29:58 +02:00

tx.c

Fix errors found by cppcheck

2017-11-16 20:34:45 +01:00

util.c

adjust MODULE_LICENSE for license change

2016-09-05 11:34:38 +02:00

util.h

move mt76_insert_hdr_pad to mt76x2_tx.c

2016-09-04 18:06:48 +02:00

S

Description

mac80211 driver for MediaTek MT76x0e, MT76x2e, MT7603, MT7615, MT7628 and MT7688

BSD-3-Clause

105 MiB

Languages

C 99.7%

Perl 0.2%

Makefile 0.1%