Felix Fietkau e6bc17ac24 mt7603: add initial code to configure beacon timers ...

Signed-off-by: Felix Fietkau <[email protected]>

2016-02-25 17:23:47 +01:00

firmware

update mt7603_e2 firmware to the latest version

2016-01-31 17:26:02 +01:00

.gitignore

add .gitignore

2015-12-13 17:54:16 +01:00

debugfs.c

mt76x2: move efuse debugfs blob to core

2016-02-22 08:47:26 +01:00

dma.c

dma: optimize icache footprint of rx path, batch frames before passing them to mac80211

2016-02-08 17:35:40 +01:00

dma.h

rename mt76_dma_init to mt76_dma_attach

2016-02-03 14:19:12 +01:00

eeprom.c

eeprom: add support for overriding the mac address via OF

2016-01-01 19:40:30 +01:00

mac80211.c

dma: optimize icache footprint of rx path, batch frames before passing them to mac80211

2016-02-08 17:35:40 +01:00

Makefile

mt7603: add initial code to configure beacon timers

2016-02-25 17:23:47 +01:00

mmio.c

move mmio functions/init to mt76.ko

2015-12-06 17:52:00 +01:00

mt76.h

mt76x2: move efuse debugfs blob to core

2016-02-22 08:47:26 +01:00

mt76x2_core.c

mt76x2: move mt76x2_set_channel to mt76x2_main.c

2016-02-03 15:58:40 +01:00

mt76x2_debugfs.c

mt76x2: move efuse debugfs blob to core

2016-02-22 08:47:26 +01:00

mt76x2_dma.c

add rx helper function which uses ieee80211_rx_napi

2016-02-08 15:06:21 +01:00

mt76x2_dma.h

move low level DMA code to mt76.ko

2015-12-06 21:32:43 +01:00

mt76x2_eeprom.c

mt76x2: move efuse debugfs blob to core

2016-02-22 08:47:26 +01:00

mt76x2_eeprom.h

move eeprom related code to common

2015-12-16 02:09:26 +01:00

mt76x2_init.c

unify tx completion handling, allow a driver callback to clean up tx skbs

2016-02-06 16:14:02 +01:00

mt76x2_mac.c

mt76x2: remove mt76x2_mac_skb_tx_overhead, it is unused

2016-02-20 20:25:18 +01:00

mt76x2_mac.h

mt76x2: remove mt76x2_mac_skb_tx_overhead, it is unused

2016-02-20 20:25:18 +01:00

mt76x2_main.c

mt76x2: reset mtxq->aggr after regular aggregation stop

2016-02-19 20:56:16 +01:00

mt76x2_mcu.c

move the struct device pointer to struct mt76_device

2015-12-06 20:36:08 +01:00

mt76x2_mcu.h

adjust include guards for new file prefix

2015-12-06 17:19:06 +01:00

mt76x2_pci.c

unify drvdata handling

2016-02-05 01:06:07 +01:00

mt76x2_phy.c

move mt76 state enum/storage to mt76.h

2015-12-06 22:05:42 +01:00

mt76x2_regs.h

mt76x2: initialize protection registers

2016-01-28 00:46:33 +01:00

mt76x2_trace.c

add a mt76x2_ prefix to all files

2015-12-06 16:54:53 +01:00

mt76x2_trace.h

move mmio functions/init to mt76.ko

2015-12-06 17:52:00 +01:00

mt76x2_tx.c

mt76x2: move mt76x2_txq_init to main.c and make it static

2016-02-06 19:22:26 +01:00

mt76x2.h

mt76x2: move efuse debugfs blob to core

2016-02-22 08:47:26 +01:00

mt7603_beacon.c

mt7603: add initial code to configure beacon timers

2016-02-25 17:23:47 +01:00

mt7603_core.c

mt7603: add initial code to configure beacon timers

2016-02-25 17:23:47 +01:00

mt7603_dma.c

mt7603: fix aggregation tx status

2016-02-22 21:06:43 +01:00

mt7603_eeprom.c

mt7603: apply OTP ROM overrides

2016-02-22 09:28:37 +01:00

mt7603_eeprom.h

mt7603: apply OTP ROM overrides

2016-02-22 09:28:37 +01:00

mt7603_init.c

mt7603: add initial code to configure beacon timers

2016-02-25 17:23:47 +01:00

mt7603_mac.c

mt7603: check unicast address for decryption

2016-02-22 23:36:36 +01:00

mt7603_mac.h

mt7603: use a single pid value for No-ACK instead of a bit

2016-02-18 20:43:02 +01:00

mt7603_main.c

mt7603: add initial code to configure beacon timers

2016-02-25 17:23:47 +01:00

mt7603_mcu.c

mt7603: replace dummy tx power data with real eeprom values

2015-12-16 13:29:05 +01:00

mt7603_mcu.h

mt7603: fix mcu tx descriptor size for firmware messages

2015-12-13 16:34:40 +01:00

mt7603_pci.c

mt7603: implement rudimentary skb tx status reporting

2016-02-06 18:16:38 +01:00

mt7603_regs.h

mt7603: add initial code to configure beacon timers

2016-02-25 17:23:47 +01:00

mt7603.h

mt7603: add initial code to configure beacon timers

2016-02-25 17:23:47 +01:00

trace.c

move mmio functions/init to mt76.ko

2015-12-06 17:52:00 +01:00

trace.h

move mmio functions/init to mt76.ko

2015-12-06 17:52:00 +01:00

tx.c

tx: fix frame queueing in mt76_release_buffered_frames

2016-02-18 20:35:03 +01:00

util.c

add support for queueing frames spanning multiple descriptors

2016-02-05 01:15:35 +01:00

util.h

mt7603: fix wcid leak

2016-02-19 09:26:42 +01:00

S

Description

mac80211 driver for MediaTek MT76x0e, MT76x2e, MT7603, MT7615, MT7628 and MT7688

BSD-3-Clause

105 MiB

Languages

C 99.7%

Perl 0.2%

Makefile 0.1%