Lorenzo BianconiandFelix Fietkau 63a79ff71f mt76: do not report out-of-range rx nss ...

Take into account device rx stream in mt76x02_mac_process_rate
in order to not report wrong number of rx spatial stream to mac80211.
The issue has been reported on mt76x0 device which is 1x1:1 however
the hw sometimes reports rx nss equal to 2

Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>

2019-01-21 21:48:35 +01:00

firmware

Revert "mt7603: update firmware to 20161027164355"

2019-01-11 15:24:32 +01:00

mt76x0

mt76: add energy detect CCA support to mt76x{0,2}e drivers

2018-12-28 13:43:56 +01:00

mt76x2

mt76: add led support to mt76x0e driver

2019-01-11 15:24:32 +01:00

mt7603

mt7603: limit station power save queue length to 64

2019-01-21 21:02:33 +01:00

.gitignore

add .gitignore

2015-12-13 17:54:16 +01:00

agg-rx.c

treewide: Use struct_size() for kmalloc()-family

2018-09-12 13:18:26 +02:00

debugfs.c

mt76: move rate_txpower handler in mt76 debugfs

2018-09-26 22:04:27 +02:00

dma.c

mt76: dma: avoid indirect call in mt76_dma_tx_queue_skb

2018-12-31 15:45:10 +01:00

dma.h

mt76x02: move TXD/RXD/MCU definitions in mt76x02_dma.h

2018-09-12 13:16:50 +02:00

eeprom.c

revert mt76_eeprom_override call reordering

2017-02-03 14:25:08 +01:00

mac80211.c

mt76: set IEEE80211_HW_NEEDS_UNIQUE_STA_ADDR flag

2019-01-16 22:33:23 +01:00

Makefile

mt76: fix building without CONFIG_LEDS_CLASS

2019-01-11 15:24:32 +01:00

mmio.c

mt76: allow to identify bus

2018-10-08 13:47:02 +02:00

mt76.h

mt76: add channel switch announcement support

2019-01-15 14:27:02 +01:00

mt76x02_debugfs.c

mt76: mmio: introduce mt76x02_check_tx_hang watchdog

2018-12-28 16:16:41 +01:00

mt76x02_dfs.c

mt76: add energy detect CCA support to mt76x{0,2}e drivers

2018-12-28 13:43:56 +01:00

mt76x02_dfs.h

mt76x0: pci: add DFS support

2018-10-23 11:14:20 +02:00

mt76x02_dma.h

mt76: move tx_tasklet management in mt76x02-lib moudle

2018-10-05 20:03:54 +02:00

mt76x02_eeprom.c

mt76: move mt76x02_eeprom_copy in mt76x02-lib module

2018-11-01 18:04:15 +01:00

mt76x02_eeprom.h

mt76x0: phy: introduce tssi calibration support

2018-11-01 18:04:15 +01:00

mt76x02_mac.c

mt76: do not report out-of-range rx nss

2019-01-21 21:48:35 +01:00

mt76x02_mac.h

mt76: add energy detect CCA support to mt76x{0,2}e drivers

2018-12-28 13:43:56 +01:00

mt76x02_mcu.c

mt76: remove wait argument from mt76x02_mcu_calibrate

2018-11-13 20:56:41 +01:00

mt76x02_mcu.h

mt76: remove wait argument from mt76x02_mcu_calibrate

2018-11-13 20:56:41 +01:00

mt76x02_mmio.c

mt76: add channel switch announcement support

2019-01-15 14:27:02 +01:00

mt76x02_phy.c

mt76: move mt76x02_phy_get_min_avg_rssi to mt76 core

2018-12-05 17:06:59 +01:00

mt76x02_phy.h

mt76: move mt76x02_phy_get_min_avg_rssi to mt76 core

2018-12-05 17:06:59 +01:00

mt76x02_regs.h

mt76: add led support to mt76x0e driver

2019-01-11 15:24:32 +01:00

mt76x02_trace.c

mt76: move mt76x02_mac_poll_tx_status in mt76x02-lib moudle

2018-10-05 20:00:30 +02:00

mt76x02_trace.h

mt76: move irq handler in mt76x02-lib moudle

2018-10-05 20:03:54 +02:00

mt76x02_txrx.c

mt76: fix tx status reporting for non-probing frames

2019-01-11 15:24:32 +01:00

mt76x02_usb_core.c

mt76: fix tx status reporting for non-probing frames

2019-01-11 15:24:32 +01:00

mt76x02_usb_mcu.c

mt76: remove mcu_msg_alloc

2018-11-01 18:04:33 +01:00

mt76x02_usb.h

mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mac.c

2018-10-08 13:47:02 +02:00

mt76x02_util.c

mt76: add channel switch announcement support

2019-01-15 14:27:02 +01:00

mt76x02.h

mt76: use proper name for __MT76x02_H macro

2019-01-11 15:24:32 +01:00

trace.c

update my email address

2016-09-04 17:33:28 +02:00

trace.h

core: rename register trace events to avoid conflict with mt7601u

2016-09-05 11:29:58 +02:00

tx.c

mt76: avoid scheduling tx queues for powersave stations

2019-01-21 17:33:38 +01:00

usb_mcu.c

mt76: usb: move mt76x02 mcu code in mt76x02-usb module

2018-09-12 13:16:24 +02:00

usb_trace.c

mt76: add usb support to mt76 layer

2018-09-11 13:49:19 +02:00

usb_trace.h

mt76: usb: fix static tracepoints

2018-10-23 09:49:40 +02:00

usb.c

mt76: usb: avoid queue/status spinlocks while passing tx status to mac80211

2018-12-28 13:43:56 +01:00

util.c

mt76: fix rssi ewma tracking

2019-01-11 15:24:32 +01:00

util.h

move mt76_insert_hdr_pad to mt76x2_tx.c

2016-09-04 18:06:48 +02:00

S

Description

mac80211 driver for MediaTek MT76x0e, MT76x2e, MT7603, MT7615, MT7628 and MT7688

BSD-3-Clause

105 MiB

Languages

C 99.7%

Perl 0.2%

Makefile 0.1%