Felix Fietkau 52161d2e86 mt76: mt76x02: fix ED/CCA enabling/disabling ...

ED/CCA needs to be disable before stopping the MAC to avoid hangs from tx
being blocked. It must only be enabled again after the MAC has been started
again.
In many places this wasn't done properly, so fix this by always clearing
the relevant ED/CCA bits in mt76x2_mac_stop and set it up again after
channel change or calibration is done

Signed-off-by: Felix Fietkau <[email protected]>

2019-02-25 17:29:20 +01:00

firmware

Revert "mt7603: update firmware to 20161027164355"

2019-01-11 15:24:32 +01:00

mt76x0

mt76: mt76x02: fix ED/CCA enabling/disabling

2019-02-25 17:29:20 +01:00

mt76x2

mt76: mt76x02: fix ED/CCA enabling/disabling

2019-02-25 17:29:20 +01:00

mt7603

mt7603: move alloc_dev common code in mt76_alloc_device

2019-02-18 20:39:41 +01:00

.gitignore

add .gitignore

2015-12-13 17:54:16 +01:00

agg-rx.c

treewide: Use struct_size() for kmalloc()-family

2018-09-12 13:18:26 +02:00

debugfs.c

mt76: move rate_txpower handler in mt76 debugfs

2018-09-26 22:04:27 +02:00

dma.c

mt76: change the return type of mt76_dma_attach()

2019-02-18 20:39:41 +01:00

dma.h

mt76: change the return type of mt76_dma_attach()

2019-02-18 20:39:41 +01:00

eeprom.c

revert mt76_eeprom_override call reordering

2017-02-03 14:25:08 +01:00

mac80211.c

mt76: Use the correct hweight8() function

2019-02-18 20:39:41 +01:00

Makefile

mt76: move mt76_mcu_msg_alloc in mt76-core

2019-02-07 14:48:34 +01:00

mcu.c

mt76: move mt76_mcu_rx_event in mt76-core

2019-02-07 14:48:44 +01:00

mmio.c

mt76: allow to identify bus

2018-10-08 13:47:02 +02:00

mt76.h

mt76: usb: do not use sg buffers for mcu messages

2019-02-18 20:39:41 +01:00

mt76x02_debugfs.c

mt76: mmio: introduce mt76x02_check_tx_hang watchdog

2018-12-28 16:16:41 +01:00

mt76x02_dfs.c

mt76: explicitly disable energy detect cca during scan

2019-02-03 13:59:32 +01:00

mt76x02_dfs.h

mt76x0: pci: add DFS support

2018-10-23 11:14:20 +02:00

mt76x02_dma.h

mt76: move tx_tasklet management in mt76x02-lib moudle

2018-10-05 20:03:54 +02:00

mt76x02_eeprom.c

mt76: move mt76x02_eeprom_copy in mt76x02-lib module

2018-11-01 18:04:15 +01:00

mt76x02_eeprom.h

mt76x0: phy: introduce tssi calibration support

2018-11-01 18:04:15 +01:00

mt76x02_mac.c

mt76: mt76x02: only reset beacon drift counter when enabling beacons

2019-02-24 13:03:21 +01:00

mt76x02_mac.h

mt76: explicitly disable energy detect cca during scan

2019-02-03 13:59:32 +01:00

mt76x02_mcu.c

mt76: mt76x02: issue watchdog reset on MCU request timeout

2019-02-24 23:19:38 +01:00

mt76x02_mcu.h

mt76: move mt76_mcu_msg_alloc in mt76-core

2019-02-07 14:48:34 +01:00

mt76x02_mmio.c

mt76: mt76x02: issue watchdog reset on MCU request timeout

2019-02-24 23:19:38 +01:00

mt76x02_phy.c

mt76: move mt76x02_phy_get_min_avg_rssi to mt76 core

2018-12-05 17:06:59 +01:00

mt76x02_phy.h

mt76: move mt76x02_phy_get_min_avg_rssi to mt76 core

2018-12-05 17:06:59 +01:00

mt76x02_regs.h

mt76: add led support to mt76x0e driver

2019-01-11 15:24:32 +01:00

mt76x02_trace.c

mt76: move mt76x02_mac_poll_tx_status in mt76x02-lib moudle

2018-10-05 20:00:30 +02:00

mt76x02_trace.h

mt76: move irq handler in mt76x02-lib moudle

2018-10-05 20:03:54 +02:00

mt76x02_txrx.c

mt76: move mt76_mcu_rx_event in mt76-core

2019-02-07 14:48:44 +01:00

mt76x02_usb_core.c

mt76x02u: remove bogus check and comment padding

2019-02-18 20:39:41 +01:00

mt76x02_usb_mcu.c

mt76: usb: do not use sg buffers for mcu messages

2019-02-18 20:39:41 +01:00

mt76x02_usb.h

mt76: use mt76x02_dev instead of mt76_dev in mt76x02_mac.c

2018-10-08 13:47:02 +02:00

mt76x02_util.c

mt76: mt76x02: only reset beacon drift counter when enabling beacons

2019-02-24 13:03:21 +01:00

mt76x02.h

mt76: mt76x02: issue watchdog reset on MCU request timeout

2019-02-24 23:19:38 +01:00

trace.c

update my email address

2016-09-04 17:33:28 +02:00

trace.h

core: rename register trace events to avoid conflict with mt7601u

2016-09-05 11:29:58 +02:00

tx.c

mt76: fix tx status timeout processing

2019-01-25 15:22:41 +01:00

usb_mcu.c

mt76: usb: do not use sg buffers for mcu messages

2019-02-18 20:39:41 +01:00

usb_trace.c

mt76: add usb support to mt76 layer

2018-09-11 13:49:19 +02:00

usb_trace.h

mt76: usb: fix static tracepoints

2018-10-23 09:49:40 +02:00

usb.c

mt76: usb: use dev_err_ratelimited instead of dev_err in mt76u_complete_rx

2019-02-18 20:39:41 +01:00

util.c

mt76: fix rssi ewma tracking

2019-01-11 15:24:32 +01:00

util.h

move mt76_insert_hdr_pad to mt76x2_tx.c

2016-09-04 18:06:48 +02:00

S

Description

mac80211 driver for MediaTek MT76x0e, MT76x2e, MT7603, MT7615, MT7628 and MT7688

BSD-3-Clause

105 MiB

Languages

C 99.7%

Perl 0.2%

Makefile 0.1%