mirror of
https://github.com/outbackdingo/mt76.git
synced 2026-10-24 13:26:48 +00:00
Felix Fietkau
dec412a05a
The firmware needs the driver to remove active links from the BSSINFO table when it destroys the interface. A link therefore stays registered from its first chanctx assignment until the interface goes away. If the driver holds the link already, a second add does nothing. mac80211 gives a non-AP MLD a new address each time it sets a link up. A link that comes back after a failed attempt thus carries an address that the hardware does not know, on a BSS that the driver never programs again. The station then authenticates from an address that nothing answers. The failure repeats until the driver tears the interface down for good. Program the address and the BSS again. This is the pair that the initial add sets up. For a station it does what mt7996_mcu_mld_link_oper() does for an AP. Link: https://patch.msgid.link/[email protected] Signed-off-by: Felix Fietkau <[email protected]>