gitops/mt76
1
0
Fork 0
mirror of https://github.com/outbackdingo/mt76.git synced 2026-10-24 05:16:57 +00:00
Code Issues Packages Projects Releases Wiki Activity

wifi: mt76: mt7996: program a link again if the driver holds it

Browse Source 
The firmware needs the driver to remove active links from the BSSINFO table
when it destroys the interface. A link therefore stays registered from its
first chanctx assignment until the interface goes away. If the driver holds
the link already, a second add does nothing.

mac80211 gives a non-AP MLD a new address each time it sets a link up. A link
that comes back after a failed attempt thus carries an address that the
hardware does not know, on a BSS that the driver never programs again. The
station then authenticates from an address that nothing answers. The failure
repeats until the driver tears the interface down for good.

Program the address and the BSS again. This is the pair that the initial add
sets up. For a station it does what mt7996_mcu_mld_link_oper() does for an AP.

Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
This commit is contained in:
Felix Fietkau
2026-08-18 15:42:32 +02:00
parent b2704cf5a4
commit dec412a05a
1 changed files with 8 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files
mt7996/main.c
+8 -1
View File
@@ -310,7 +310,14 @@ int mt7996_vif_link_add(struct mt76_phy *mphy, struct ieee80211_vif *vif,
if (vif->type == NL80211_IFTYPE_AP)
return mt7996_mcu_mld_link_oper(dev, link_conf, link,
true);
return 0;
/* update the link address */
ret = mt7996_mcu_add_dev_info(phy, vif, link_conf, mlink, true);
if (ret)
return ret;
return mt7996_mcu_add_bss_info(phy, vif, link_conf, mlink,
msta_link, true);
}
mlink->idx = __ffs64(~dev->mt76.vif_mask);