Felix Fietkau 08719b1129 mt76: use a per rx queue page fragment cache ...

Using the NAPI or netdev frag cache along with other drivers can lead to
32 KiB pages being held for a long time, despite only being used for
very few page fragments.

This can happen if the driver grabs one or two fragments for rx ring
refill, while other drivers use (and free up) the remaining fragments.
The 32 KiB higher-order page can only be freed once all users have freed
their fragments.

Depending on the traffic patterns, this can waste a lot of memory and
look a lot like a memory leak.

Signed-off-by: Felix Fietkau <[email protected]>

2018-07-13 16:28:41 +02:00

firmware

update MT7628 firmware to the latest version

2018-05-19 10:52:29 +02:00

.gitignore

add .gitignore

2015-12-13 17:54:16 +01:00

agg-rx.c

mt76: add rcu locking in tid reorder function

2018-04-14 21:48:35 +02:00

debugfs.c

mt76: add led active low to debugfs

2018-04-09 11:34:04 +02:00

dma.c

mt76: use a per rx queue page fragment cache

2018-07-13 16:28:41 +02:00

dma.h

update my email address

2016-09-04 17:33:28 +02:00

eeprom.c

revert mt76_eeprom_override call reordering

2017-02-03 14:25:08 +01:00

mac80211.c

mt76: wait for pending tx to complete before switching channel

2018-05-20 07:57:25 +02:00

Makefile

mt76: implement A-MPDU rx reordering in the driver code

2018-01-22 10:43:21 +01:00

mmio.c

core: rename register trace events to avoid conflict with mt7601u

2016-09-05 11:29:58 +02:00

mt76.h

mt76: use a per rx queue page fragment cache

2018-07-13 16:28:41 +02:00

mt76x2_core.c

mt76x2: add hw radar detector

2016-09-25 18:13:12 +02:00

mt76x2_debugfs.c

mt76x2: add a debugfs file to dump agc calibration information

2018-06-15 19:12:14 +02:00

mt76x2_dfs.c

mt76x2: dfs: take into account dfs region in mt76x2_dfs_init_params()

2018-01-18 19:06:53 +01:00

mt76x2_dfs.h

mt76x2: dfs: add set_domain handler

2018-01-18 19:06:30 +01:00

mt76x2_dma.c

mt76x2: fix WMM parameter configuration

2018-01-18 19:10:20 +01:00

mt76x2_dma.h

update my email address

2016-09-04 17:33:28 +02:00

mt76x2_eeprom.c

mt76x2: fix tx_alc_enabled check

2018-04-09 10:15:14 +02:00

mt76x2_eeprom.h

mt76x2: fix tx_alc_enabled check

2018-04-09 10:15:14 +02:00

mt76x2_init.c

mt76x2: track rssi for gain adjustment per station

2018-06-19 11:15:19 +02:00

mt76x2_mac.c

mt76x2: track rssi for gain adjustment per station

2018-06-19 11:15:19 +02:00

mt76x2_mac.h

mt76x2: make mt76x2_mac_reset routine static

2018-04-03 21:36:32 +02:00

mt76x2_main.c

mt76x2: track rssi for gain adjustment per station

2018-06-19 11:15:19 +02:00

mt76x2_mcu.c

mt76: use mt76_poll_msec routine in mt76pci_load_firmware()

2018-03-19 21:38:48 +01:00

mt76x2_mcu.h

mt76x2: init: add ma80211 led callbacks

2017-10-31 10:22:15 +01:00

mt76x2_pci.c

mt76x2: Add PCI identifier for MT7602

2017-11-01 09:10:00 +01:00

mt76x2_phy.c

mt76x2: track rssi for gain adjustment per station

2018-06-19 11:15:19 +02:00

mt76x2_regs.h

mt76x2: add mac80211 {set,get}_antenna callbacks

2018-03-21 11:23:10 +01:00

mt76x2_trace.c

update my email address

2016-09-04 17:33:28 +02:00

mt76x2_trace.h

update my email address

2016-09-04 17:33:28 +02:00

mt76x2_tx.c

mt76: fix beacon timer drift

2018-05-18 17:46:01 +02:00

mt76x2.h

mt76x2: track rssi for gain adjustment per station

2018-06-19 11:15:19 +02:00

mt7603_beacon.c

mt7603: turn vif wcid entry back into a full mt7603_sta

2018-04-16 12:07:53 +02:00

mt7603_core.c

update my email address

2016-09-04 17:33:28 +02:00

mt7603_debugfs.c

update my email address

2016-09-04 17:33:28 +02:00

mt7603_dma.c

mt76: increase rx ring size for mt76x2

2017-11-16 16:26:45 +01:00

mt7603_eeprom.c

mt7603: support loading the entire EEPROM from OTP

2017-02-27 09:52:36 +01:00

mt7603_eeprom.h

update my email address

2016-09-04 17:33:28 +02:00

mt7603_init.c

mt76: move ieee80211_hw allocation to common core

2018-05-20 07:57:25 +02:00

mt7603_mac.c

mt7603: clear PSE reset bit if PSE reset fails

2018-05-20 07:57:25 +02:00

mt7603_mac.h

update my email address

2016-09-04 17:33:28 +02:00

mt7603_main.c

mt7603: do not hold dev->mutex while flushing dev->mac_work

2018-05-20 07:57:25 +02:00

mt7603_mcu.c

mt7603: mcu: fix potential NULL pointer dereferencing on failed allocation

2017-12-15 15:31:01 +01:00

mt7603_mcu.h

mt7603: mcu: fix indentation of mcu command definition

2017-09-25 20:25:12 +02:00

mt7603_pci.c

update my email address

2016-09-04 17:33:28 +02:00

mt7603_regs.h

mt7603: clean up dma debug reads

2017-12-02 11:11:58 +01:00

mt7603_soc.c

update my email address

2016-09-04 17:33:28 +02:00

mt7603.h

mt7603: retry PSE reset calls

2018-04-18 11:53:24 +02:00

trace.c

update my email address

2016-09-04 17:33:28 +02:00

trace.h

core: rename register trace events to avoid conflict with mt7601u

2016-09-05 11:29:58 +02:00

tx.c

mt76: only stop tx queues on offchannel, not during the entire scan

2018-05-20 07:57:25 +02:00

util.c

adjust MODULE_LICENSE for license change

2016-09-05 11:34:38 +02:00

util.h

move mt76_insert_hdr_pad to mt76x2_tx.c

2016-09-04 18:06:48 +02:00

S

Description

mac80211 driver for MediaTek MT76x0e, MT76x2e, MT7603, MT7615, MT7628 and MT7688

BSD-3-Clause

105 MiB

Languages

C 99.7%

Perl 0.2%

Makefile 0.1%