Introduce mt7996_sta_state routine in order to initialize wcid structure
in mt7996 codebase. This is a preliminary patch to enable MLO support in
MT7996 driver.
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Some countries have strict RF restrictions where changing the regulatory
domain dynamically based on the connected AP is not acceptable.
This patch disables Beacon country IE hinting when a valid country code
is set from usersland (e.g., by system using iw or CRDA).
Signed-off-by: Leon Yen <[email protected]>
Signed-off-by: Ming Yen Hsieh <[email protected]>
Tested-by: David Ruth <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
mt76 does a lot of:
local_bh_disable();
napi_enable(...napi);
napi_schedule(...napi);
local_bh_enable();
local_bh_disable() is not a real lock, its most likely taken
because napi_schedule() requires that we invoke softirqs at
some point. napi_enable() needs to take a mutex, so move it
from under the BH protection.
Fixes: 413f0271f396 ("net: protect NAPI enablement with netdev_lock()")
Reported-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/[email protected]
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Refactor for making use of mt76_get_power_bound instead of the specific
mt7996_get_power_bound, since we need this for other chipsets as well
when calculating txpower
Signed-off-by: Razvan Grigore <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Refactor for making use of mt76_get_power_bound instead of the specific
mt7915_get_power_bound, since we need this for other chipsets as well
when calculating txpower
Signed-off-by: Razvan Grigore <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Similar to the mt7921, seems the code was copy-paste from there. This
bug was noticed by me and confirmed by many more people using this
chipset with openwrt: https://github.com/openwrt/mt76/issues/783
It seems that for this particular chipset the mt76_phy->txpower_cur is
never set, like in the case of other chipsets like mt7603, mt7615, etc.
The driver is correctly calculating the TX power adjustment based on the
number of antennas. However, the base TX power (phy->txpower_cur) is not
being properly initialized or set to a meaningful value. It's starting
at 0, so the final result is just the antenna gain compensation divided
by 2.
Signed-off-by: Razvan Grigore <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
This bug was noticed by me and confirmed by many more people using this
chipset with openwrt: https://github.com/openwrt/mt76/issues/783
It seems that for this particular chipset the mt76_phy->txpower_cur is
never set, like in the case of other chipsets like mt7603, mt7615, etc.
The driver is correctly calculating the TX power adjustment based on the
number of antennas. However, the base TX power (phy->txpower_cur) is not
being properly initialized or set to a meaningful value. It's starting
at 0, so the final result is just the antenna gain compensation divided
by 2.
Signed-off-by: Razvan Grigore <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
This patch introduces version 3 of the MTCL table, which provides
regulatory information for WiFi 7. It also configured by the platform
vender like the version 1 and 2.
Signed-off-by: Ming Yen Hsieh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
The code for handling ACPI configuration in CLC was copied from the mt7921
driver but is not utilized in the mt7925 implementation. So removes the
unused functionality to clean up the codebase.
Cc: [email protected]
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
The 5.9/6GHz channel license of a certain platform device has been
regulated in various countries. That may be difference with standard Liunx
regulatory domain settings. In this case, when .reg_notifier() called for
regulatory change, mt7925 chipset should update the channel usage based on
CLC data.
Signed-off-by: Ming Yen Hsieh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Some countries do not support EHT modulation for now. To prevent violating
regulations, the MT7925 chipset should control the EHT capabilities.
Therefore, when a regulatory domain change is detected during scanning,
the `mt7925_regd_be_ctrl` will process the CLC data to update the EHT
capabilities.
Signed-off-by: Ming Yen Hsieh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Due to the increase in the number of power tables for 6Ghz on CLC,
the variable nr_country is no longer sufficient to represent the
total quantity. Therefore, we have switched to calculating the
length of clc buf to obtain the correct power table.
Cc: [email protected]
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Assuming sums of values stored in variables such as sub_total_cnt
and total_ppdu_cnt are big enough to warrant their u64 type, it
makes sense to ensure that their calculation takes into account
possible integer overflow issues.
Play it safe and fix the problem by casting right hand expressions
to u64 as well. Also, slightly adjust tabulation.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: 1966a5078f2d ("mt76: mt7915: add mu-mimo and ofdma debugfs knobs")
Signed-off-by: Nikita Zhandarovich <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
The mt7925 sometimes fails to enter low power mode during suspend.
This is caused by the chip firmware sending an additional ACK event
to the host after processing the suspend command. Due to timing issues,
this event may not reach the host, causing the chip to get stuck.
To resolve this, the ACK flag in the suspend command is removed,
as it is not needed in the MT7925 architecture. This prevents the
firmware from sending the additional ACK event, ensuring the device
can reliably enter low power mode during suspend.
Signed-off-by: Quan Zhou <[email protected]>
Link: https://patch.msgid.link/d056938144a3a0336c3a4e3cec6f271899f32bf7.1736775666.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <[email protected]>
This patch introduces MLO capability control for the MT792x Wi-Fi driver.
It removes the unused `MT792x_CHIP_CAP_MLO_EVT_EN` flag and introduces new
capability flags `MT792x_CHIP_CAP_MLO_EN` and `MT792x_CHIP_CAP_MLO_EML_EN`
to enable MLO and EML features based on firmware capabilities.
Signed-off-by: Ming Yen Hsieh <[email protected]>
Reviewed-by: Sabeeh Khan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
The interrupt status polling is unreliable, which can cause status events
to get lost. On all newer chips, txs-timeout is an indication that the
packet was either never sent, or never acked.
Fixes issues with inactivity polling.
Signed-off-by: Felix Fietkau <[email protected]>
