Release host link resources when mt7925_mac_sta_add_links() fails after
partial success.
msta->link[] and dev->mt76.wcid[] may already be published, so unwind
the host state to avoid leaving stale links behind.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Move the msta->link[link_id] publication until after
mt7925_mac_link_sta_add() succeeds.
msta->link[] is RCU-visible, so publishing it before setup completes can
expose a link whose add path later fails. Publish it only after success
to avoid partially initialized link state becoming visible.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Allocate mt792x_link_sta with kzalloc() and free it with kfree_rcu()
instead of devm-managed memory.
msta->link[] is published via RCU, so the link STA must remain valid
until readers have quiesced after teardown. Manage the object lifetime
with kfree_rcu() to match its RCU-visible publication.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Move WCID teardown into mt7925_mac_link_sta_remove() to mirror the
dev->mt76.wcid[] publish done during link add.
This clears the published WCID before the rest of teardown, so WCID
lookups no longer expose a link that is being removed.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Remove the redundant mt76_wcid_init() call after publishing the WCID in
mt7925_mac_link_sta_add().
WCID is already initialized before publication, so reinitializing it
afterward is unnecessary and makes the setup ordering less clear.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Undo the published WCID state when mt7925_mac_link_sta_add() fails after
WCID setup.
The add path can fail after dev->mt76.wcid[] is published, so the error
path must clear the partial host-side WCID state to avoid leaving stale
entries behind.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the dead pri_link check in mt7925_mac_sta_remove_links() and
perform WCID cleanup unconditionally.
mlink->pri_link is already cleared before the test, making the branch
ineffective. This matches the actual teardown behaviour and simplifies
the remove path.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the mt792x_vif_to_link() lookup in mt7925_mcu_wtbl_update_hdr_trans()
and pass the resolved mconf and mlink from the caller instead. The link
context is already known at the call site, making the lookup redundant.
This keeps the helper lookup-free and makes link ownership explicit.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
mt792x_sta_to_link() uses rcu_dereference_protected() and therefore
expects mt76.mutex to be held. Move the lookup after
mt792x_mutex_acquire() to make the locking explicit and correct.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the mt792x_sta_to_link() lookup in mt7925_set_link_key() and pass
the resolved mlink from the caller instead. The link context is already
known at the call site, making the lookup redundant.
This keeps the helper lookup-free and makes link ownership explicit.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the mt792x_sta_to_link() lookup in mt7925_mcu_wtbl_update_hdr_trans()
and pass the resolved mlink from the caller instead. The link context is
already known at the call site, making the lookup redundant.
This keeps the helper lookup-free and makes link ownership explicit.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Replace the dead wcid NULL check in mt7925_mcu_sta_hdr_trans_tlv() with
a WARN_ON_ONCE() guard on mlink before dereferencing mlink->wcid.
wcid is always derived from mlink, so mlink is the only meaningful
object to validate here.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the mt792x_sta_to_link() lookup in mt7925_mcu_sta_hdr_trans_tlv()
and pass the resolved mlink from the caller instead. The link is
already known at the call site, making the lookup redundant.
This keeps the helper lookup-free and makes WCID selection explicit.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the mt792x_sta_to_link() lookup in mt7925_mac_link_sta_remove()
and pass mlink from mt7925_mac_sta_remove_links() instead. The link is
already resolved there, making the extra lookup redundant.
This keeps the remove helper lookup-free and avoids hidden dependence on
msta->link[link_id] during teardown.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Use mlink->wcid.def_wcid to obtain the primary mlink in
mt7925_mac_link_sta_add() instead of calling mt792x_sta_to_link().
The primary link context is already carried by the WCID, so the extra
lookup is redundant. This makes the add path follow the existing WCID
association directly.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the mt792x_sta_to_link() lookup in mt7925_mcu_sta_update() and
pass the resolved mlink from the caller instead. The link context is
already known at the call site, making the lookup redundant.
This keeps the helper lookup-free and makes WCID selection explicit.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the mt792x_sta_to_link() lookup in mt7925_mcu_sta_mld_tlv() and
pass mlink and mconf from the caller instead. The link context is
already known at the call site, making the lookup redundant.
This keeps the helper lookup-free and makes MLD link selection
explicit.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the mt792x_sta_to_link() lookup in mt7925_mcu_bss_basic_tlv() and
pass the resolved WCID indices from the caller instead. The link
context is already known, so the lookup is redundant.
This makes link ownership explicit and keeps the helper lookup-free.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the mt792x_sta_to_link() lookup in mt7925_mcu_sta_amsdu_tlv() and
pass mlink from the caller instead. The link context is already known
so the lookup is redundant.
This makes link ownership explicit and keeps the helper lookup-free.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
mt7925u uses different reset/status registers from mt7921u. Reusing the
mt7921u register set causes the WFSYS reset to fail.
Add a chip-specific descriptor in mt792xu_wfsys_reset() to select the
correct registers and fix mt7925u failing to initialize after a warm
reboot.
Fixes: d28e1a48952e ("wifi: mt76: mt792x: introduce mt792x-usb module")
Cc: [email protected]
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Prepare mt792xu_wfsys_reset() for chips that share the same USB WFSYS
reset flow but use different register definitions.
This is a pure refactor of the current mt7921u path and keeps the reset
sequence unchanged.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Restart the MCU and poll FW state to ensure correct MCU status
before downloading the ROM patch.
This is a prerequisite for enabling MT7902 PCIe and has been
validated on MT7921 and MT7925 since they share the common code path.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Add a dummy register read in mt76_connac_mcu_rate_txpower_band() to act as
a PSE barrier. This would release PSE pages and prevents buffer underflow
issues when handling MCU commands with larger payloads without the response
in mt76_connac_mcu_set_rate_txpower().
This is a prerequisite patch before enabling MT7902 PCIe and SDIO support.
Co-developed-by: Xiong Huang <[email protected]>
Signed-off-by: Xiong Huang <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Add MT7902 PCIe specific DMA layout overrides for MCU TXQ index, RX ring
size, and MCU_WA usage. Common layout remains the default for other chips.
This is a prerequisite patch before enabling MT7902 PCIe support.
Co-developed-by: Xiong Huang <[email protected]>
Signed-off-by: Xiong Huang <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
MT7902 PCIe requires a different wm2_complete_mask value, so introduce a
mutable per-device copy of the default irq_map and override the field
only for this chip. Other devices continue using the shared const
template.
This is a prerequisite patch before enabling MT7902 PCIe support.
Co-developed-by: Xiong Huang <[email protected]>
Signed-off-by: Xiong Huang <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Replace explicit napi_disable() calls for RX queues with
mt76_for_each_q_rx() in mt7921e_mac_reset().
This removes hardcoded queue indices and disables all configured
RX queues during reset.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Unify all per-chip conditionals under the new is_connac2() helper. This
avoids confusion caused by the previous is_mt7921() check, which
implicitly covered multiple connac2 chipsets and no longer reflected its
actual scope. This is a clean-up only change with no functional impact.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
roc_abort_sync() can deadlock with roc_work(). roc_work() holds
dev->mt76.mutex, while cancel_work_sync() waits for roc_work()
to finish. If the caller already owns the same mutex, both
sides block and no progress is possible.
This deadlock can occur during station removal when
mt76_sta_state() -> mt76_sta_remove() -> mt7921_mac_sta_remove() ->
mt7921_roc_abort_sync() invokes cancel_work_sync() while
roc_work() is still running and holding dev->mt76.mutex.
This avoids the mutex deadlock and preserves exactly-once
work ownership.
Fixes: 352d966126e6 ("wifi: mt76: mt7921: fix a potential association failure upon resuming")
Co-developed-by: Quan Zhou <[email protected]>
Signed-off-by: Quan Zhou <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
IEEE80211_CHANCTX_CHANGE_PUNCTURING is a channel context change
flag and should not be checked in the BSS change handler, where
the changed mask represents enum ieee80211_bss_change.
Remove the puncturing handling from the BSS path and rely on
mt7925_change_chanctx() to update puncturing configuration.
Fixes: cadebdad959b ("wifi: mt76: mt7925: add EHT preamble puncturing")
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
roc_abort_sync() can deadlock with roc_work(). roc_work() holds
dev->mt76.mutex, while cancel_work_sync() waits for roc_work()
to finish. If the caller already owns the same mutex, both
sides block and no progress is possible.
This deadlock can occur during station removal when
mt76_sta_state() -> mt76_sta_remove() ->
mt7925_mac_sta_remove_link() -> mt7925_mac_link_sta_remove() ->
mt7925_roc_abort_sync() invokes cancel_work_sync() while
roc_work() is still running and holding dev->mt76.mutex.
This avoids the mutex deadlock and preserves exactly-once
work ownership.
Fixes: 45064d19fd3a ("wifi: mt76: mt7925: fix a potential association failure upon resuming")
Co-developed-by: Quan Zhou <[email protected]>
Signed-off-by: Quan Zhou <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Reset ampdu_state if ieee80211_start_tx_ba_session() fails in
mt76_connac2_tx_check_aggr(), otherwise the driver may incorrectly
assume aggregation is active and skip future BA setup attempts.
Fixes: 163f4d22c118 ("mt76: mt7921: add MAC support")
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
This commit extends the `mt76_connac_mcu_uni_add_dev` function to include
support for Multi-Link Operation (MLO). Additionally, backward
compatibility for MT7921 is preserved, enabling seamless integration with
existing setups.
Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
The mt7925 only supports offload firmware making the fw_offload check
redundant. This update simplifies the logic in "mt7925_mcu_sta_cmd"
by removing the unnecessary check for fw_offoad.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
The mt7925_mac_link_bss_remove function currently removes the per-link BSS.
We will extend this function when we implement the MLO functionality.
This patch only includes structural changes and does not involve any
logic changes.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
The mt7925_mac_link_bss_add function currently creates the per-link BSS.
We will extend this function when we implement the MLO functionality.
This patch only includes structural changes and does not involve any
logic changes.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
The mt7925_mac_link_sta_remove function currently removes the per-link STA.
We will extend this function when we implement the MLO functionality.
This patch only includes structural changes and does not involve any
logic changes.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
The mt7925_mac_link_sta_add function currently associates the per-link STA.
We will extend this function when we implement the MLO functionality.
This patch only includes structural changes and does not involve any
logic changes.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
The mt7925_mac_link_sta_add function currently adds the per-link STA.
We will extend this function when we implement the MLO functionality.
This patch only includes structural changes and does not involve any
logic changes.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Extend mt76_connac_get_phy_mode_v2 with the per-link STA configuration.
The patch we created is a prerequisite to enable the MLO function in the
driver. It is purely a refactoring patch so the functionality should
remain unchanged.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Extend mt7925_mcu_sta_update with the per-link STA configuration.
The patch we created is a prerequisite to enable the MLO function in the
driver. It is purely a refactoring patch so the functionality should
remain unchanged.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
