Only put probe request packets in the offchannel queue if
IEEE80211_TX_CTRL_DONT_USE_RATE_MASK is set and IEEE80211_TX_CTL_TX_OFFCHAN
is unset.
Fixes: 0b3be9d1d34e ("wifi: mt76: add separate tx scheduling queue for off-channel tx")
Reported-by: Chad Monroe <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Avoid leaking beacons on unrelated channels during scanning/roc
Fixes: c56d6edebc1f ("wifi: mt76: mt7996: use emulated hardware scan support")
Reported-by: Chad Monroe <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
In mt76_wmac_probe(), when the mt76_alloc_device() call succeeds, memory
is allocated for both struct ieee80211_hw and a workqueue. However, on
the error path, the workqueue is not freed. Fix that by calling
mt76_free_device() on the error path.
Fixes: c8846e101502 ("mt76: add driver for MT7603E and MT7628/7688")
Signed-off-by: Abdun Nihaal <[email protected]>
Reviewed-by: Jiri Slaby <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
When station mode, don't disconnect when we get
channel switch from AP to DFS channel. Most APs
send CSA request after pass background CAC. In other
case we should disconnect after detect beacon miss.
Without patch when we get CSA to DFS channel get:
"kernel: wlo1: preparing for channel switch failed, disconnecting"
Signed-off-by: Janusz Dziedzic <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
A new warning in clang [1] points out a couple of places where a hdr
variable is not initialized then passed along to skb_put_data().
drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:1894:21: warning: variable 'hdr' is uninitialized when passed as a const pointer argument here [-Wuninitialized-const-pointer]
1894 | skb_put_data(skb, &hdr, sizeof(hdr));
| ^~~
drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:3386:21: warning: variable 'hdr' is uninitialized when passed as a const pointer argument here [-Wuninitialized-const-pointer]
3386 | skb_put_data(skb, &hdr, sizeof(hdr));
| ^~~
Zero initialize these headers as done in other places in the driver when
there is nothing stored in the header.
Cc: [email protected]
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Link: https://github.com/llvm/llvm-project/commit/00dacf8c22f065cb52efb14cd091d441f19b319e [1]
Closes: https://github.com/ClangBuiltLinux/linux/issues/2104
Signed-off-by: Nathan Chancellor <[email protected]>
Link: https://patch.msgid.link/20250715-mt7996-fix-uninit-const-pointer-v1-1-b5d8d11d7b78@kernel.org
Signed-off-by: Felix Fietkau <[email protected]>
Fix the wcid pointer used in mt7996_mcu_sta_ba routine to properly
support MLO scenario.
Fixes: 98686cd21624c ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Due to the lack of NoA(Notice of Absence) mechanism in SoftAP mode, it is
inappropriate to allow concurrent SoftAP and STA to operate on the
different channels.
This patch restricts the concurrent SoftAP and STA to be setup on the same
channel only.
Signed-off-by: Leon Yen <[email protected]>
Signed-off-by: Ming Yen Hsieh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
devm_kasprintf() returns NULL on error. Currently, mt7925_thermal_init()
does not check for this case, which results in a NULL pointer
dereference.
Add NULL check after devm_kasprintf() to prevent this issue.
Fixes: 396e41a74a88 ("wifi: mt76: mt7925: support temperature sensor")
Signed-off-by: Henry Martin <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Since the page_pool for MT76 MMIO devices are created with
PP_FLAG_DMA_SYNC_DEV flag, we do not need to sync_for_device each page
received from the pool since it is already done by the page_pool
codebase.
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
sta->valid_links bitmask can be set even for non-MLO client.
Fixes: dd82a9e02c054 ("wifi: mt76: mt7996: Rely on mt7996_sta_link in sta_add/sta_remove callbacks")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Fis possible Out-Of-Boundary access in mt7996_tx routine if link_id is
set to IEEE80211_LINK_UNSPECIFIED
Fixes: 3ce8acb86b661 ("wifi: mt76: mt7996: Update mt7996_tx to MLO support")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Use proper link_id value for secondary link lookup in
mt7996_mcu_sta_mld_setup_tlv routine.
Fixes: 00cef41d9d8f5 ("wifi: mt76: mt7996: Add mt7996_mcu_sta_mld_setup_tlv() and mt7996_mcu_sta_eht_mld_tlv()")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
ML interfaces can have multiple affiliated links to it and
hence there is a need to report tx power of specified link
rather deflink.
Add changes to report tx power of requested link from mac80211,
also pass link id as an argument in get_tx_power op so that supported
drivers can use it to report link's tx power.
Co-developed-by: Aaradhana Sahu <[email protected]>
Signed-off-by: Aaradhana Sahu <[email protected]>
Signed-off-by: Rameshkumar Sundaram <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
Several places use rcu_dereference to get a wcid entry without validating
if the index exceeds the array boundary. Fix this by using a helper function,
which handles validation.
Signed-off-by: Felix Fietkau <[email protected]>
When running in AP mode and deauthenticating a client that's in powersave
mode, the disassoc/deauth packet can get stuck in a tx queue along with
other buffered frames. This can fill up hardware queues with frames
that are only released after the WTBL slot is reused for another client.
Fix this by moving deauth packets to the ALTX queue.
Signed-off-by: Felix Fietkau <[email protected]>
The decap offload configuration should only be applied after the STA has
been successfully initialized. Attempting to configure it earlier can lead
to corruption of the MAC configuration in the chip's hardware state.
Add an early check for `msta->deflink.wcid.sta` to ensure the station peer
is properly initialized before proceeding with decapsulation offload
configuration.
Cc: [email protected]
Fixes: 24299fc869f7 ("mt76: mt7921: enable rx header traslation offload")
Signed-off-by: Deren Wu <[email protected]>
Link: https://patch.msgid.link/f23a72ba7a3c1ad38ba9e13bb54ef21d6ef44ffb.1748149855.git.deren.wu@mediatek.com
Signed-off-by: Felix Fietkau <[email protected]>
The ssid->ssids[] and sreq->ssids[] arrays have MT7925_RNR_SCAN_MAX_BSSIDS
elements so this >= needs to be > to prevent an out of bounds access.
Fixes: 8284815ca161 ("wifi: mt76: mt7925: add RNR scan support for 6GHz")
Signed-off-by: Dan Carpenter <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Update the destination index to use 'n_ssids', which is incremented only
when a valid SSID is present. Previously, both mt76_connac_mcu_hw_scan()
and mt7925_mcu_hw_scan() used the loop index 'i' for the destination
array, potentially leaving gaps if any source SSIDs had zero length.
Cc: [email protected]
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Michael Lo <[email protected]>
Signed-off-by: Ming Yen Hsieh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
MT_INT_TX_DONE_MCU_WM may cause tx interrupt to be mishandled
during a reset failure, leading to the reset process failing.
By using MT_INT_TX_DONE_MCU instead of MT_INT_TX_DONE_MCU_WM,
the handling of tx interrupt is improved.
Cc: [email protected]
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Since mt7996_mcu_add_rate_ctrl() and mt7996_mcu_set_fixed_field() can't
run in atomic context, move RCU critical section in
mt7996_mcu_add_rate_ctrl() and mt7996_mcu_set_fixed_field(). This patch
fixes a 'sleep while atomic' issue in mt7996_mac_sta_rc_work().
Fixes: 0762bdd30279 ("wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Tested-by: Ben Greear <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Since mt76_mcu_skb_send_msg() routine can't be executed in atomic context,
move RCU section in mt7996_mcu_add_rate_ctrl() and execute
mt76_mcu_skb_send_msg() in non-atomic context. This is a preliminary
patch to fix a 'sleep while atomic' issue in mt7996_mac_sta_rc_work().
Fixes: 0762bdd30279 ("wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Since mt7996_mcu_set_fixed_field() can't be executed in a RCU critical
section, move RCU section in mt7996_mcu_add_rate_ctrl_fixed() and run
mt7996_mcu_set_fixed_field() in non-atomic context. This is a
preliminary patch to fix a 'sleep while atomic' issue in
mt7996_mac_sta_rc_work().
Fixes: 0762bdd30279 ("wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Since mt76_mcu_skb_send_msg() routine can't be executed in atomic context,
move RCU section in mt7996_mcu_set_fixed_field() and execute
mt76_mcu_skb_send_msg() in non-atomic context. This is a preliminary
patch to fix a 'sleep while atomic' issue in mt7996_mac_sta_rc_work().
Fixes: 0762bdd30279 ("wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Rely on GFP_ATOMIC flag in __mt76_connac_mcu_alloc_sta_req since it can
run in atomic context. This is a preliminary patch to fix a 'sleep while
atomic' issue in mt7996_mac_sta_rc_work().
Fixes: 0762bdd30279 ("wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Restart the MCU and release the patch semaphore before loading the MCU
patch firmware from the host.
This fixes failures upon error recovery in case the semaphore was
previously taken and never released by the host.
This happens from time to time upon triggering a full-chip error
recovery. Under this circumstance, the hardware restart fails and the
radio is rendered inoperational.
Signed-off-by: David Bauer <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
