MT7928 has a different physical address layout. Add a dedicated
mt7928_fixed_map[] remapping table and select it at runtime. Set
mdev->rev early in probe for correct chip revision detection.
Signed-off-by: Leon Yen <[email protected]>
Signed-off-by: Emery Hsin <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Fix the 0x7c500000 remap entry window size from 0x2000000 (32MB) to
0x200000 (2MB) to match the actual addressable range.
This is a preparation patch before enabling MT7928 PCIe support.
Signed-off-by: Emery Hsin <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Change MT792x_BASIC_RATES_TBL index from 11 to 14 to match the latest
connac3 firmware rate table layout.
This is a preparation patch before enabling MT7928 PCIe support.
Signed-off-by: Emery Hsin <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Add a tx_done field to mt792x_dma_layout and extend
mt792x_dma_alloc_queues() to allocate the MT_RXQ_MCU_WA queue when
tx_done.ring_base is configured.
This is a preparation patch before enabling MT7928 PCIe support.
Signed-off-by: Emery Hsin <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Rename MT_WTBLON_TOP_WDUCR and MT_WTBL_UPDATE to MT7925-prefixed
versions since MT7928 uses different WTBL register offsets.
This is a preparation patch before enabling MT7928 PCIe support.
Signed-off-by: Emery Hsin <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Rename MT_WFDMA0_CSR_TX_DMASHDL_ENABLE to
MT_WFDMA0_GLO_CFG_EXT0_CSR_TX_DMASHDL_EN to follow the register
naming convention (parent register name as prefix).
This is a preparation patch before enabling MT7928 PCIe support.
Signed-off-by: Emery Hsin <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Add MT7925_PCIE_MAC_{INT_ENABLE,PM} macros and mt7925_pcie_reg
struct. Update all PCIe register accesses in pci.c, pci_mac.c, and
pci_mcu.c to use dev->pcie_reg->{imask,pm}.
This is a preparation patch before enabling MT7928 PCIe support.
Signed-off-by: Xiong <[email protected]>
Signed-off-by: Emery Hsin <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Add MT_PCIE_MAC_{INT_ENABLE,PM} definitions to mt7921/regs.h and
wire up mt7921_pcie_reg in mt7921_pci_probe() to provide connac2
series chips with their own PCIe register definitions.
This is a preparation patch before enabling MT7928 PCIe support.
Signed-off-by: Xiong <[email protected]>
Signed-off-by: Emery Hsin <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Replace hardcoded MT_PCIE_MAC_INT_ENABLE and MT_PCIE_MAC_PM macros
with a per-chip mt792x_pcie_reg struct. Remove the shared macros
from mt792x_regs.h and update mt792x_wpdma_reinit_cond() to use
dev->pcie_reg.
This is a preparation patch before enabling MT7928 PCIe support.
Signed-off-by: Emery Hsin <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Add MT7927_INT_RX_DONE_{DATA,WM,WM2,ALL} macros and populate
all_complete_mask in mt7927_irq_map. MT7927 maps RX_DONE_DATA to
ENA4 and RX_DONE_WM to ENA6, differing from MT7925.
This is a preparation patch before enabling MT7928 PCIe support.
Signed-off-by: Emery Hsin <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Replace shared MT_INT_RX_DONE_* macros with chip-specific
MT7925_INT_RX_DONE_{DATA,WM,WM2,ALL} and populate all_complete_mask
in mt7925_irq_map. Update resume and mac_reset paths accordingly.
This is a preparation patch before enabling MT7928 PCIe support.
Signed-off-by: Emery Hsin <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Populate all_complete_mask in MT7921 irq_map and update pci_resume()
and mac_reset() to use irq_map->rx.all_complete_mask instead of the
hardcoded MT_INT_RX_DONE_ALL macro.
This is a preparation patch before enabling MT7928 PCIe support.
Signed-off-by: Emery Hsin <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Add all_complete_mask to irq_map rx sub-struct and use it in
mt792x_irq_tasklet() and mt792x_dma_enable() to replace individual
per-ring mask OR expressions.
This is a preparation patch before enabling MT7928 PCIe support.
Signed-off-by: Emery Hsin <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
