Add the 0e8d:7902 USB ID and select the MT7902 WM firmware. Use the
same USB queue mapping as mt7921/mt7925 so MT7902U can bind and probe
through mt7921u driver.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Advertise NAN and NAN data support when firmware exposes NAN
capability.
Add NAN interface combinations on top of the dynamic combination
framework, advertise 2.4 GHz and 5 GHz NAN bands, and enable secure
NAN.
Keep the base interface combinations unchanged when NAN is unavailable
so existing STA/AP/P2P modes keep the same limits.
Co-developed-by: Stella Liu <[email protected]>
Signed-off-by: Stella Liu <[email protected]>
Co-developed-by: Jeremy Yu <[email protected]>
Signed-off-by: Jeremy Yu <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Move mt792x interface combination selection into a helper and store the
selected table in mt792x device state.
This keeps the existing non-CNM and CNM combinations unchanged while
making later firmware-gated extensions add combinations without touching
the common wiphy setup path.
Co-developed-by: Stella Liu <[email protected]>
Signed-off-by: Stella Liu <[email protected]>
Co-developed-by: Jeremy Yu <[email protected]>
Signed-off-by: Jeremy Yu <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
During reset recovery, mt7925_vif_connect_iter() replays firmware state
for links tracked in mvif->valid_links. After MLO link changes or MCU
timeout recovery, the driver bitmap can temporarily contain a link whose
mac80211 bss_conf has already gone away.
This can pass a NULL bss_conf to mt76_connac_mcu_uni_add_dev(), matching
the crash where x1, the second argument, is NULL:
pc : mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib]
lr : mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common]
x2 : ffffff80a77f6018 x1 : 0000000000000000 x0 : ffffff8099402080
Call trace:
mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib]
mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common]
mt7925_mac_reset_work+0x264/0x2f8 [mt7925_common]
Skip missing bss_conf entries before replaying the link. Non-MLO AP/STA
reset replay is unchanged because the helper still returns &vif->bss_conf
for the legacy link.
Fixes: 14061994184d ("wifi: mt76: mt7925: add link handling in mt7925_vif_connect_iter")
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Newer mt7925 firmware uses a shorter WoW pattern TLV with rsv[3]. Select
the v2 layout based on the firmware build date, while keeping the old
layout for older firmware.
This also makes the WoW pattern handling compatible with newer devices
such as MT7928.
Tested-by: Stella Liu <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
MT7927 needs monitor interfaces to be passed to the driver as real vifs
so each monitor interface can be configured with its own band context.
This is required to support concurrent 2 GHz and 5 GHz monitor operation
on the same hw.
Keep the existing virtual monitor behavior for older chips.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Use the active channel context to select the SNIFFER command band index on
MT7927, and fall back to the PHY chandef when no channel context is
available.
Also pass the same band index to the sniffer channel configuration. This
keeps monitor setup on the correct band, especially when multiple PHY band
contexts are present.
Fixes: 35a5dcc71735 ("wifi: mt76: mt7925: add MT7927 PCIe support")
Signed-off-by: Sean Wang <[email protected]>
Tested-by: Devin Wittmayer <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
USB disconnect can leave reset/init work, TX worker, and MCU waiters active
while the device is being removed. Stop those paths before unregistering
the device to avoid teardown waiting on firmware or queue activity after
disconnect.
Run WFSYS reset after USB queue deinit so removal does not issue the reset
while USB traffic may still be queued.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Configure the USB UDMA TX timeout limit and enable timeout detection
during DMA initialization, matching the vendor driver setup. Use a
longer timeout to avoid false alarms.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Mark the mt792x USB bus hung on the first control timeout and switch
register access to no-op bus ops. Each failed vendor request may spend
up to MT_VEND_REQ_MAX_RETRY * MT_VEND_REQ_TOUT_MS, about 3 seconds, and
teardown/reset paths can keep issuing such requests after the device has
stopped responding.
Also skip the USB WFSYS reset path after bus_hung is set, since it uses
UHW vendor requests as well.
mt7925u 1-2:1.3: vendor request req:63 off:0018 failed:-110
mt7925u 1-2:1.3: vendor request req:63 off:0018 failed:-110
mt7925u 1-2:1.3: vendor request req:63 off:0018 failed:-110
mt7925u 1-2:1.3: vendor request req:63 off:0018 failed:-110
mt7925u 1-2:1.3: vendor request req:63 off:0018 failed:-110
Avoid repeating those register reads after the bus is known to be hung by
switching register access to no-op handlers.
Fixes: 0d2afe09fad5 ("mt76: mt7921: add mt7921u driver")
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Skip mt7925 reset handling once the bus is marked hung.
A hung bus cannot be recovered by issuing another device reset. Continuing
the reset path may only send more failing MCU or register accesses and
delay teardown. Return early from reset work and the USB reset path so the
failed device can be torn down quickly.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Stop retrying hardware init once the bus is marked hung.
The control path is no longer usable at that point, so more retries only
issue failing device accesses, including MCU commands or register
operations, and delay teardown. Exit early and let the failed device be
torn down quickly.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Add per-device USB reset work and a control-path access check helper
for mt7921u and mt7925u.
This prepares common infrastructure for transport-level recovery while
keeping the reset state per-device for correct lifetime handling.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
mt792x_tx() rewrites addr1/addr2/addr3 by treating skb->data as
an 802.11 header for MLD traffic.
That is only valid for native 802.11 frames. Direct 802.3 TX can also
reach this path with IEEE80211_TX_CTL_HW_80211_ENCAP set, where
skb->data is not an 802.11 header.
Skip the MLD header rewrite for HW-encap packets to avoid corrupting
802.3 frame contents.
Fixes: ebb1406813c6 ("wifi: mt76: mt7925: add link handling to txwi")
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
With MLO, traffic for one TID can be sent on any active link. Programming
BA state only on the default link leaves the other active links out of
sync.
Program BA state on all active links instead.
Fixes: 766ea2cf5a39 ("Revert "wifi: mt76: mt7925: Update mt7925_mcu_uni_[tx,rx]_ba for MLO"")
Tested-by: Yao Ting Hsieh <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
mt7925_mcu_sta_ba() currently hides the BA target behind an implicit WCID
lookup.
Pass the WCID explicitly so the caller controls which BA context is being
programmed.
No functional change intended.
Tested-by: Yao Ting Hsieh <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
For MLO, the same TID can run over different links. Keeping TX BA state in
a link WCID makes the state depend on which link starts aggregation first.
Store it in the primary WCID instead, so the BA state stays stable across
links.
Fixes: 44eb173bdd4f ("wifi: mt76: mt7925: add link handling in mt7925_txwi_free")
Tested-by: Yao Ting Hsieh <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Add the MT7927 USB device ID and normalize the raw 0x6639 CHIPID to
MT7927 so the shared mt7925u code can use the proper chip-specific paths.
Restore the required band setup after USB MAC reset before restarting
the device.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
MT7927 needs DBDC enabled and uses a fixed firmware band assignment for
2.4GHz and 5/6GHz BSS contexts.
Reprogram the STA dev context when the channel context is assigned so the
firmware sees the updated band_idx before the BSS is used. This avoids
stale band programming after band changes.
Co-developed-by: Javier Tia <[email protected]>
Signed-off-by: Javier Tia <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Add the MT7927-specific PCIe DMA queue layout and local DMA setup,
including the extra RX ring and WFDMA/prefetch programming.
MT7927 does not follow the mt7925 DMA configuration, so provide a
separate DMA init path while reusing the existing common queue setup.
This keeps the chip-specific changes local and prepares the driver
for later MT7927 enablement without affecting existing devices.
Co-developed-by: Javier Tia <[email protected]>
Signed-off-by: Javier Tia <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Convert mt7925 DMA init to use the common mt792x queue allocation
helper and isolate the mt7925-specific prefetch/WFDMA setup.
This removes duplicated DMA setup code and prepares the path for
follow-up chip-specific DMA support with smaller deltas.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
The mt792x PCIe DMA setup uses the same standard queue allocation
sequence for data, MCU, firmware download and RX rings.
Factor this part out into a small common helper so later chip support
can reuse the existing flow without duplicating the queue setup logic.
This keeps the common DMA skeleton in one place and makes follow-up
chip-specific DMA changes smaller and easier to review.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Add a dedicated MT7927 WFSYS reset path in mt792x_wfsys_reset().
Unlike the existing connac2/connac3 reset flow that toggles the WFSYS
software reset bit and waits for init-done, MT7927 reset is driven
through CBInfra and requires polling ROMCODE_INDEX until the MCU returns
to the idle value after reset.
Keep this dormant for now: no MT7927 PCI IDs are added by this patch, so
it only prepares the reset logic without making the driver bind to MT7927
hardware yet.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Firmware may return wlan_failure when deactivating a BSS that is already
inactive. This is a valid teardown case and should not fail the remove
path.
Keep activation failures unchanged since they still indicate that firmware
failed to create or activate the BSS state.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Release host link resources when mt7925_mac_sta_add_links() fails after
partial success.
msta->link[] and dev->mt76.wcid[] may already be published, so unwind
the host state to avoid leaving stale links behind.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Move the msta->link[link_id] publication until after
mt7925_mac_link_sta_add() succeeds.
msta->link[] is RCU-visible, so publishing it before setup completes can
expose a link whose add path later fails. Publish it only after success
to avoid partially initialized link state becoming visible.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Allocate mt792x_link_sta with kzalloc() and free it with kfree_rcu()
instead of devm-managed memory.
msta->link[] is published via RCU, so the link STA must remain valid
until readers have quiesced after teardown. Manage the object lifetime
with kfree_rcu() to match its RCU-visible publication.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Move WCID teardown into mt7925_mac_link_sta_remove() to mirror the
dev->mt76.wcid[] publish done during link add.
This clears the published WCID before the rest of teardown, so WCID
lookups no longer expose a link that is being removed.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Remove the redundant mt76_wcid_init() call after publishing the WCID in
mt7925_mac_link_sta_add().
WCID is already initialized before publication, so reinitializing it
afterward is unnecessary and makes the setup ordering less clear.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Undo the published WCID state when mt7925_mac_link_sta_add() fails after
WCID setup.
The add path can fail after dev->mt76.wcid[] is published, so the error
path must clear the partial host-side WCID state to avoid leaving stale
entries behind.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the dead pri_link check in mt7925_mac_sta_remove_links() and
perform WCID cleanup unconditionally.
mlink->pri_link is already cleared before the test, making the branch
ineffective. This matches the actual teardown behaviour and simplifies
the remove path.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the mt792x_vif_to_link() lookup in mt7925_mcu_wtbl_update_hdr_trans()
and pass the resolved mconf and mlink from the caller instead. The link
context is already known at the call site, making the lookup redundant.
This keeps the helper lookup-free and makes link ownership explicit.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
mt792x_sta_to_link() uses rcu_dereference_protected() and therefore
expects mt76.mutex to be held. Move the lookup after
mt792x_mutex_acquire() to make the locking explicit and correct.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the mt792x_sta_to_link() lookup in mt7925_set_link_key() and pass
the resolved mlink from the caller instead. The link context is already
known at the call site, making the lookup redundant.
This keeps the helper lookup-free and makes link ownership explicit.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the mt792x_sta_to_link() lookup in mt7925_mcu_wtbl_update_hdr_trans()
and pass the resolved mlink from the caller instead. The link context is
already known at the call site, making the lookup redundant.
This keeps the helper lookup-free and makes link ownership explicit.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Replace the dead wcid NULL check in mt7925_mcu_sta_hdr_trans_tlv() with
a WARN_ON_ONCE() guard on mlink before dereferencing mlink->wcid.
wcid is always derived from mlink, so mlink is the only meaningful
object to validate here.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the mt792x_sta_to_link() lookup in mt7925_mcu_sta_hdr_trans_tlv()
and pass the resolved mlink from the caller instead. The link is
already known at the call site, making the lookup redundant.
This keeps the helper lookup-free and makes WCID selection explicit.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the mt792x_sta_to_link() lookup in mt7925_mac_link_sta_remove()
and pass mlink from mt7925_mac_sta_remove_links() instead. The link is
already resolved there, making the extra lookup redundant.
This keeps the remove helper lookup-free and avoids hidden dependence on
msta->link[link_id] during teardown.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Use mlink->wcid.def_wcid to obtain the primary mlink in
mt7925_mac_link_sta_add() instead of calling mt792x_sta_to_link().
The primary link context is already carried by the WCID, so the extra
lookup is redundant. This makes the add path follow the existing WCID
association directly.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the mt792x_sta_to_link() lookup in mt7925_mcu_sta_update() and
pass the resolved mlink from the caller instead. The link context is
already known at the call site, making the lookup redundant.
This keeps the helper lookup-free and makes WCID selection explicit.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the mt792x_sta_to_link() lookup in mt7925_mcu_sta_mld_tlv() and
pass mlink and mconf from the caller instead. The link context is
already known at the call site, making the lookup redundant.
This keeps the helper lookup-free and makes MLD link selection
explicit.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the mt792x_sta_to_link() lookup in mt7925_mcu_bss_basic_tlv() and
pass the resolved WCID indices from the caller instead. The link
context is already known, so the lookup is redundant.
This makes link ownership explicit and keeps the helper lookup-free.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the mt792x_sta_to_link() lookup in mt7925_mcu_sta_amsdu_tlv() and
pass mlink from the caller instead. The link context is already known
so the lookup is redundant.
This makes link ownership explicit and keeps the helper lookup-free.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
mt7925u uses different reset/status registers from mt7921u. Reusing the
mt7921u register set causes the WFSYS reset to fail.
Add a chip-specific descriptor in mt792xu_wfsys_reset() to select the
correct registers and fix mt7925u failing to initialize after a warm
reboot.
Fixes: d28e1a48952e ("wifi: mt76: mt792x: introduce mt792x-usb module")
Cc: [email protected]
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Prepare mt792xu_wfsys_reset() for chips that share the same USB WFSYS
reset flow but use different register definitions.
This is a pure refactor of the current mt7921u path and keeps the reset
sequence unchanged.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Restart the MCU and poll FW state to ensure correct MCU status
before downloading the ROM patch.
This is a prerequisite for enabling MT7902 PCIe and has been
validated on MT7921 and MT7925 since they share the common code path.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Add a dummy register read in mt76_connac_mcu_rate_txpower_band() to act as
a PSE barrier. This would release PSE pages and prevents buffer underflow
issues when handling MCU commands with larger payloads without the response
in mt76_connac_mcu_set_rate_txpower().
This is a prerequisite patch before enabling MT7902 PCIe and SDIO support.
Co-developed-by: Xiong Huang <[email protected]>
Signed-off-by: Xiong Huang <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Add MT7902 PCIe specific DMA layout overrides for MCU TXQ index, RX ring
size, and MCU_WA usage. Common layout remains the default for other chips.
This is a prerequisite patch before enabling MT7902 PCIe support.
Co-developed-by: Xiong Huang <[email protected]>
Signed-off-by: Xiong Huang <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
MT7902 PCIe requires a different wm2_complete_mask value, so introduce a
mutable per-device copy of the default irq_map and override the field
only for this chip. Other devices continue using the shared const
template.
This is a prerequisite patch before enabling MT7902 PCIe support.
Co-developed-by: Xiong Huang <[email protected]>
Signed-off-by: Xiong Huang <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Replace explicit napi_disable() calls for RX queues with
mt76_for_each_q_rx() in mt7921e_mac_reset().
This removes hardcoded queue indices and disables all configured
RX queues during reset.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Unify all per-chip conditionals under the new is_connac2() helper. This
avoids confusion caused by the previous is_mt7921() check, which
implicitly covered multiple connac2 chipsets and no longer reflected its
actual scope. This is a clean-up only change with no functional impact.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
roc_abort_sync() can deadlock with roc_work(). roc_work() holds
dev->mt76.mutex, while cancel_work_sync() waits for roc_work()
to finish. If the caller already owns the same mutex, both
sides block and no progress is possible.
This deadlock can occur during station removal when
mt76_sta_state() -> mt76_sta_remove() -> mt7921_mac_sta_remove() ->
mt7921_roc_abort_sync() invokes cancel_work_sync() while
roc_work() is still running and holding dev->mt76.mutex.
This avoids the mutex deadlock and preserves exactly-once
work ownership.
Fixes: 352d966126e6 ("wifi: mt76: mt7921: fix a potential association failure upon resuming")
Co-developed-by: Quan Zhou <[email protected]>
Signed-off-by: Quan Zhou <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
IEEE80211_CHANCTX_CHANGE_PUNCTURING is a channel context change
flag and should not be checked in the BSS change handler, where
the changed mask represents enum ieee80211_bss_change.
Remove the puncturing handling from the BSS path and rely on
mt7925_change_chanctx() to update puncturing configuration.
Fixes: cadebdad959b ("wifi: mt76: mt7925: add EHT preamble puncturing")
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
roc_abort_sync() can deadlock with roc_work(). roc_work() holds
dev->mt76.mutex, while cancel_work_sync() waits for roc_work()
to finish. If the caller already owns the same mutex, both
sides block and no progress is possible.
This deadlock can occur during station removal when
mt76_sta_state() -> mt76_sta_remove() ->
mt7925_mac_sta_remove_link() -> mt7925_mac_link_sta_remove() ->
mt7925_roc_abort_sync() invokes cancel_work_sync() while
roc_work() is still running and holding dev->mt76.mutex.
This avoids the mutex deadlock and preserves exactly-once
work ownership.
Fixes: 45064d19fd3a ("wifi: mt76: mt7925: fix a potential association failure upon resuming")
Co-developed-by: Quan Zhou <[email protected]>
Signed-off-by: Quan Zhou <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Reset ampdu_state if ieee80211_start_tx_ba_session() fails in
mt76_connac2_tx_check_aggr(), otherwise the driver may incorrectly
assume aggregation is active and skip future BA setup attempts.
Fixes: 163f4d22c118 ("mt76: mt7921: add MAC support")
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
This commit extends the `mt76_connac_mcu_uni_add_dev` function to include
support for Multi-Link Operation (MLO). Additionally, backward
compatibility for MT7921 is preserved, enabling seamless integration with
existing setups.
Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
