mirror of
https://github.com/outbackdingo/mt76.git
synced 2026-10-24 13:26:48 +00:00
mt76: mt7915: fix injected MPDU transmission to not use HW A-MSDU
Before, the hardware would be allowed to transmit injected 802.11 MPDUs as A-MSDU. This resulted in corrupted frames being transmitted. Now, injected MPDUs are transmitted as-is, without A-MSDU. The fix was verified with frame injection on MT7915 hardware, both with and without the injected frame being encrypted. If the hardware cannot do A-MSDU aggregation on MPDUs, this problem would also be present in the TX path where mac80211 does the 802.11 encapsulation. However, I have not observed any such problem when disabling IEEE80211_HW_SUPPORTS_TX_ENCAP_OFFLOAD to force that mode. Therefore this fix is isolated to injected frames only. The same A-MSDU logic is also present in the mt7921 driver, so it is likely that this fix should be applied there too. I do not have access to mt7921 hardware so I have not been able to test that. Signed-off-by: Johan Almbladh <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
This commit is contained in:
committed by
Felix Fietkau
parent
7fa5229a42
commit
025a72cd2d
@@ -1112,6 +1112,7 @@ mt7915_mac_write_txwi_80211(struct mt7915_dev *dev, __le32 *txwi,
|
||||
val = MT_TXD3_SN_VALID |
|
||||
FIELD_PREP(MT_TXD3_SEQ, IEEE80211_SEQ_TO_SN(seqno));
|
||||
txwi[3] |= cpu_to_le32(val);
|
||||
txwi[7] &= ~cpu_to_le32(MT_TXD7_HW_AMSDU);
|
||||
}
|
||||
|
||||
val = FIELD_PREP(MT_TXD7_TYPE, fc_type) |
|
||||
|
||||
Reference in New Issue
Block a user