Effectively, this PR consists of a few changes:
1. The easy part:
In case of permanent logical slots are defined in the global configuration, Patroni on the primary will not only create them, but also periodically update DCS with the current values of `confirmed_flush_lsn` for all these slots.
In order to reduce the number of interactions with DCS the new `/status` key was introduced. It will contain the json object with `optime` and `slots` keys. For backward compatibility the `/optime/leader` will be updated if there are members with old Patroni in the cluster.
2. The tricky part:
On replicas that are eligible for a failover, Patroni creates the logical replication slot by copying the slot file from the primary and restarting the replica. In order to copy the slot file Patroni opens a connection to the primary with `rewind` or `superuser` credentials and calls `pg_read_binary_file()` function.
When the logical slot already exists on the replica Patroni periodically calls `pg_replication_slot_advance()` function, which allows moving the slot forward.
3. Additional requirements:
In order to ensure that primary doesn't cleanup tuples from pg_catalog that are required for logical decoding, Patroni enables `hot_standby_feedback` on replicas with logical slots and on cascading replicas if they are used for streaming by replicas with logical slots.
4. When logical slots are copied from to the replica there is a timeframe when it could be not safe to use them after promotion. Right now there is no protection from promoting such a replica. But, Patroni will show the warning with names of the slots that might be not safe to use.
Compatibility.
The `pg_replication_slot_advance()` function is only available starting from PostgreSQL 11. For older Postgres versions Patroni will refuse to create the logical slot on the primary.
The old "permanent slots" feature, which creates logical slots right after promotion and before allowing connections, was removed.
Close: https://github.com/zalando/patroni/issues/1749
So far Patroni was performing a comparison of the old value (in the `pg_settings`) with the new value (from Patroni configuration or from DCS) in order to figure out if reload or restart is required when the parameter has been changed. If the given parameter was missing in the `pg_settings` Patroni was ignoring it and not writing into the `postgresql.conf`.
In case if Postgres is not running, no validation has been performed and parameters and values were written into the config as it is.
It is not a very common mistake, but people tend to mistype parameter names or values.
Also, it happens that some parameters are removed in specific Postgres versions and some new are added (e.g. `checkpoint_segments` replaced with `min_wal_size` and `max_wal_size` in 9.5 or` wal_keep_segments` was replaced with `wal_keep_size` in 13).
Writing nonexistent parameters or invalid values into the `postgresql.conf` makes postgres unstartable.
This change doesn't solve the issue 100%, but at least approaching this goal very close.
The only python-etcd3 client working directly via gRPC still supports only a single endpoint, which is not very nice for high-availability.
Since Patroni is already using a heavily hacked version of python-etcd with smart retries and auto-discovery out-of-the-box, I decided to enhance the existing code with limited support of v3 protocol via gRPC-gateway.
Unfortunately, watches via gRPC-gateway requires us to open and keep the second connection to the etcd.
Known limitations:
* The very minimal supported version is 3.0.4. On earlier versions transactions don't work due to bugs in grpc-gateway. Without transactions we can't do atomic operations, i.e. leader locks.
* Watches work only starting from 3.1.0
* Authentication works only starting from 3.3.0
* gRPC-gateway does not support authentication using TLS Common Name. This is because gRPC-proxy terminates TLS from its client so all the clients share a cert of the proxy: https://github.com/etcd-io/etcd/blob/master/Documentation/op-guide/authentication.md#using-tls-common-name
The official python kubernetes client contains a lot of auto-generated code and therefore very heavy, but we need only a little fraction of it.
The naive implementation, that covers all API methods we use, takes about 250 LoC, and about half of it is responsible for the handling of configuration files.
Disadvantage: If somebody was using the `patronictl` outside of the pod (on his machine), it might not work anymore (depending on the environment).
- ``GET /replica?lag=<max-lag>``: replica check endpoint.
- ``GET /asynchronous?lag=<max-lag>`` or ``GET /async&lag=<max-lag>``: asynchronous standby check endpoint.
Checks replication latency and returns status code **200** only when the latency is below a specified value. The key leader_optime from DCS is used for the leader WAL position and compute latency on the replica for performance reasons. Please note that the value in leader_optime might be a couple of seconds old (based on loop_wait).
Co-authored-by: Alexander Kukushkin <[email protected]>
The standby cluster doesn't know about leader elections in the main cluster and therefore the usual mechanisms of detecting divergences don't work. For example, it could happen that the standby cluster is ahead of the new primary of the main cluster and must be rewound.
There is a way to know that the new timeline has been created by checking the presence of a history file in pg_wal. If the new file is there, we will start usual procedures of making sure that we can continue streaming or will run the pg_rewind.
When making a decision whether the running replica is able to stream from the new primary or must be rewound we should use replayed location, therefore we extract received and replayed independently.
Reuse the part of the query that extracts the timeline and locations in the REST API.
So far Patroni was parsing `recovery.conf` or querying `pg_settings` in order to get the current values of recovery parameters. On PostgreSQL earlier than 12 it could easily happen that the value of `primary_conninfo` in the `recovery.conf` has nothing to do with reality. Luckily for us, on PostgreSQL 9.6+ there is a `pg_stat_wal_receiver` view, which contains current values of `primary_conninfo` and `primary_slot_name`. The password field is masked through, but this is fine, because authentication happens only during opening the connection. All other parameters we compare as usual.
Another advantage of `pg_stat_wal_recevier` - it contains the current timeline, therefore on 9.6+ we don't need to use the replication connection trick if walreceiver process is alive.
If there is no walreceiver process available or it is not streaming we will stick to old methods.
when Patroni is trying to figure out the necessity of pg_rewind it could write the content history file from the primary into the log. The history file is growing with every failover/switchover and eventually starts taking too many lines in the log, most of them are not so much useful.
Instead of showing the raw data, we will show only 3 lines before the current replica timeline and 2 lines after.
## Feature: Postgres stop timeout
Switchover/Failover operation hangs on signal_stop (or checkpoint) call when postmaster doesn't respond or hangs for some reason(Issue described in [1371](https://github.com/zalando/patroni/issues/1371)). This is leading to service loss for an extended period of time until the hung postmaster starts responding or it is killed by some other actor.
### master_stop_timeout
The number of seconds Patroni is allowed to wait when stopping Postgres and effective only when synchronous_mode is enabled. When set to > 0 and the synchronous_mode is enabled, Patroni sends SIGKILL to the postmaster if the stop operation is running for more than the value set by master_stop_timeout. Set the value according to your durability/availability tradeoff. If the parameter is not set or set <= 0, master_stop_timeout does not apply.
Upon the start of Patroni and Postgres make sure that unix_socket_directories and stats_temp_directory exist or try to create them. Patroni will exit if failed to create them.
Close https://github.com/zalando/patroni/issues/863
Recently it has happened two times when people tried to deploy the new cluster but postgres data directory wasn't empty and also wasn't valid. In this case Patroni was still creating initialize key in DCS and trying to start the postgres up.
Now it will complain about non-empty invalid postgres data directory and exit.
Close https://github.com/zalando/patroni/issues/1216
The /history endpoint shows the content of the `history` key in DCS
The /cluster endpoint show all cluster members and some service info like pending and scheduled restarts or switchovers.
In addition to that implement `patronictl history`
Close#586Close#675Close#1133
It is possible that some config files are not controlled by Patroni and when somebody is doing reload via REST API or by sending SIGHUP to Patroni process the usual expectation is that postgres will also be reloaded, but it didn't happen when there were no changes in the postgresql section of Patroni config.
For example one might replace ssl_cert_file and ssl_key_file on the filesystem and starting from PostgreSQL 10 it just requires a reload, but Patroni wasn't doing it.
In addition to that fix the issue with handling of `wal_buffers`. The default value depends on `shared_buffers` and `wal_segment_size` and therefore Patroni was exposing pending_restart when the new value in the config was explicitly set to -1 (default).
Close https://github.com/zalando/patroni/issues/1198
* use `SHOW primary_conninfo` instead of parsing config file on pg12
* strip out standby and recovery parameters from postgresql.auto.conf before starting the postgres 12
Patroni config remains backward compatible.
Despite for example `restore_command` converted to a GUC starting from postgresql 12, in the Patroni configuration you can still keep it in the `postgresql.recovery_conf` section.
If you put it into `postgresql.parameters.restore_command`, that will also work, but it is important not to mix both ways:
```yaml
# is OK
postgresql:
parameters:
restore_command: my_restore_command
archive_cleanup_command: my_archive_cleanup_command
# is OK
postgresql:
recovery_conf:
restore_command: my_restore_command
archive_cleanup_command: my_archive_cleanup_command
# is NOT ok
postgresql:
parameters:
restore_command: my_restore_command
recovery_conf:
archive_cleanup_command: my_archive_cleanup_command
```
* Convert postgresql.py into a package
* Factor out cancellable process into a separate class
* Factor out connection handler into a separate class
* Move postmaster into postgresql package
* Factor out pg_rewind into a separate class
* Factor out bootstrap into a separate class
* Factor out slots handler into a separate class
* Factor out postgresql config handler into a separate class
* Move callback_executor into postgresql package
This is just a careful refactoring, without code changes.
