* Always run `pg_rewind` against the remote master
* Always use the remote master as the source when "recovering" stopped standby leader
* Use remote master as the source when "recovering" the node in the unhealthy cluster
* Use the local dbname as the fallback when doing `pg_rewind` from the remote master
* `no_replication_slot` is the allowed key in the `RemoteMember` object
* Make it possible to "bootstrap" the new `standby_cluster` with existing (and valid) data directory. There is one prerequisite though, there should be no `patroni.dynamic.json` file in it!
* Use `shutil.move` instead of `os.replace`, which is available only from 3.3
* Introduce standby-leader health-check and consul service
* Improve unit tests, some lines were not covered
* rename `assertEquals` -> `assertEqual`, due to deprecation warning
If Patroni gets partitioned it starts receiving stale information from DCS.
We can't use this information to determine that we have the leader key.
Instead, we will record in Ha object the actual state of acquire/update lock and report as a leader only if it was successful.
P.S. despite responding with 200 on `GET /master` postgres was still running read-only.
It is possible to change a lot of parameters in runtime (including `restapi.listen`) by updating Patroni config file and sending SIGHUP to Patroni process.
If something was misconfigured it was throwing a weird exception and breaking `restapi` thread.
This PR improves friendliness of error message and avoids breaking of `restapi`.
It didn't affect directly neither failover nor switchover, but in some rare cases it was reporting it as a success too early, when the former leader released the lock: `Failed over to "None" instead of "desired-node"`
In addition to that this commit improves logs and status messages by differentiating between failover and switchover.
It is very easy to get current timeline on the master by executing
```sql
SELECT ('x' || SUBSTR(pg_walfile_name(pg_current_wal_lsn()), 1, 8))::bit(32)::int
```
Unfortunately the same method doesn't work when postgres is_in_recovery. Therefore we will use replication connection for that on the replicas. In order to avoid opening and closing replication connection on every HA loop we will cache the result if its value matches with the timeline of the master.
Also this PR introduces a new key in DCS: `/history`. It will contain a json serialized object with timeline history in a format similar to the usual history files. The differences are:
* Second column is the absolute wal position in bytes, instead of LSN
* Optionally there might be a fourth column - timestamp, (mtime of history file)
Make it possible to cancel a running task if you want to reinitialize replica.
There are two possible ways to trigger it:
1. patronictl will ask whether you want to cancel already running task if an attempt to trigger reinitialize has failed
2. if you are using `--force` argument with `patronictl reinit`
in addition to that implement additional checks around manual failover and recover when synchronous_mode is enabled
* Comparison must be case insensitive
* Do not send keepalives if watchdog is not active
* Avoid activating watchdog in a pause mode
* Set correct postgres state in pause mode
* Don't try to run queries from API if postgres is stopped
Originally fetch_nodes_statuses was returning a tuple, later it was
wrapped into namedtuple _MemberStatus and recently _MemberStatus was
extened with watchdog_failed field, but api.py was still relying on
usual tuple and checking failover limitations on it's own instead of
calling `failover_limitation` method.
* Only activate watchdog while master and not paused
We don't really need the protections while we are not master. This way
we only need to tickle the watchdog when we are updating leader key or
while demotion is happening.
As implemented we might fail to notice to shut down the watchdog if
someone demotes postgres and removes leader key behind Patroni's back.
There are probably other similar cases. Basically if the administrator
if being actively stupid they might get unexpected restarts. That seems
fine.
* Add configuration change support. Change MODE_REQUIRED to disable leader eligibility instead of closing Patroni.
Changes watchdog timeout during the next keepalive when ttl is changed. Watchdog driver and requirement can also be switched online.
When watchdog mode is `required` and watchdog setup does not work then the effect is similar to nofailover. Add watchdog_failed to status API to signify this. This is True only when watchdog does not work **AND** it is required.
* Reset implementation when config changed while active.
* Add watchdog safety margin configuration
Defaults to 5 seconds. Basically this is the maximum amount of time
that can pass between the calls to odcs.update_leader()` and
`watchdog.keepalive()`, which are called right after each other. Should
be safe for pretty much any sane scenario and allows the default
settings to not trigger watchdog when DCS is not responding.
* Cancel bootstrap if watchdog activation fails
The system would have demoted itself anyway the next HA loop. Doing it
in bootstrap gives at least some other node chance to try bootstrapping
in the hope that it is configured correctly.
If all nodes are unable to activate they will continue to try until the
disk is filled with moved datadirs. Perhaps not ideal behavior, but as
the situation is unlikely to resolve itself without administrator
intervention it doesn't seem too bad.
Previously pg_ctl waited for a timeout and then happily trodded on considering PostgreSQL to be running. This caused PostgreSQL to show up in listings as running when it was actually not and caused a race condition that resulted in either a failover or a crash recovery or a crash recovery interrupted by failover and a missed rewind.
This change adds a master_start_timeout parameter and introduces a new state for the main run_cycle loop: starting. When master_start_timeout is zero we will fail over as soon as there is a failover candidate. Otherwise PostgreSQL will be started, but once master_start_timeout expires we will stop and release leader lock if failover is possible. Once failover succeeds or fails (no leader and no one to take the role) we continue with normal processing. While we are waiting for the master timeout we handle manual failover requests.
* Introduce timeout parameter to restart.
When restart timeout is set master becomes eligible for failover after that timeout expires regardless of master_start_time. Immediate restart calls will wait for this timeout to pass, even when node is a standby.
Previously replicas were always watching for leader key (even if the
postgres was not in the running there). It was not a big issue, but it
was not possible to interrupt such watch in cases if the postgres
started up or stopped successfully. Also it was delaying update_member
call and we had kind of stale information in DCS up to `loop_wait`
seconds. This commit changes such behavior. If the async_executor is
busy by starting/stopping or restarting postgres we will not watch for
leader key but waiting for event from async_executor up to `loop_wait`
seconds. Async executor will fire such event only in case if the
function it was calling returned something what could be evaluated to
boolean True.
Such functionality is really needed to change the way how we are making
decision about necessity of pg_rewind. It will require to have a local
postgres running and for us it is really important to get such
notification as soon as possible.
* Replace pytz.UTC with dateutil.tz.tzutc, it helps to reduce memory by more than 4Mb...
* fix check of python version: 0x0300000 => 0x3000000
* Update leader key before restart and demote
Adds a new configuration variable synchronous_mode. When enabled Patroni will manage synchronous_standby_names to enable synchronous replication whenever there are healthy standbys available. With synchronous mode enabled Patroni will automatically fail over only to a standby that was synchronously replicating at the time of master failure. This effectively means zero lost user visible transactions.
To enforce the synchronous failover guarantee Patroni stores current synchronous replication state in the DCS, using strict ordering, first enable synchronous replication, then publish the information. Standby can use this to verify that it was indeed a synchronous standby before master failed and is allowed to fail over.
We can't enable multiple standbys as synchronous, allowing PostreSQL to pick one because we can't know which one was actually set to be synchronous on the master when it failed. This means that on standby failure commits will be blocked on the master until next run_cycle iteration. TODO: figure out a way to poke Patroni to run sooner or allow for PostgreSQL to pick one without the possibility of lost transactions.
On graceful shutdown standbys will disable themselves by setting a nosync tag for themselves and waiting for the master to notice and pick another standby. This adds a new mechanism for Ha to publish dynamic tags to the DCS.
When the synchronous standby goes away or disconnects a new one is picked and Patroni switches master over to the new one. If no synchronous standby exists Patroni disables synchronous replication (synchronous_standby_names=''), but not synchronous_mode. In this case, only the node that was previously master is allowed to acquire the leader lock.
Added acceptance tests and documentation.
Implementation by @ants with extensive review by @CyberDem0n.
When Patroni was "joining" already running postgres it was not calling
callbacks, what in some cases causing issues (callback could be used to
change routing/load-balancer or assign/remove floating (service) ip.
In addition to that we should `start` postgres instead of `restart`-ing
it when doing recovery, because in this case 'on_start' callback should
be called, instead of 'on_restart'
* Make different kazoo timeouts dependant on loop_wait
ping timeout ~ 1/2 * loop_wait
connect_timeout ~ 1/2 * loop_wait
Originally these values were calculated from negotiated session timeout
and didn't worked very well, because it was taking significant time to
figure out that connection is dead and reconnect (up to session timeout)
and not giving us time to retry.
* Address the code review
Fix return value in the should_run_scheduled_action and the comments.
Correct the json composition in the scheduled_restart test.
Fix the delete in case there is no scheduled restart.
Fix the usage of format in the logger output.
Fix the indentation in the evaluate_scheduled_restart.
Fix the condition related to the body_is_optional in the do_POST_restart.
Fix a few typos in the error messages.
Fix the _read_json_content
Make the scheduled restart unit-tests a bit less ugly
Make sure the scheduled restart flag is cleared when the
postmaster_start_time changes since the time restart was scheduled.
Additionally, separate the logic of checking the restart conditions
into the function in order to support conditions for the normal
restart as well.
The scheduled restart data structures are now independent of those
used by the normal restarts. This would be fixed in subsequent
commits.
Add the behave tests, that cover the POST /restart (but not DELETE).
The scheduled restart API extends the already existing restart
endpoint by processing the parameters in the request body.
Only one scheduled restart at a time is support. DELETE method
on the /restart endpoint is used to remove an existing restart.
And some other tricks with overriding handle_one_request and finish
methods from the parent class which were necessary only to make OPTIONS
request from haproxy work with python2, but in fact it was still not
working with python3. Instead of doing all the magic we should simply
give to haproxy what it wants to get: HTTP response code and nothing
more.
Mostly this tag is necessary to give a hint to load balancer
auto-configuration tool that node should not be included into
LB configuration.
In addition to that Patroni also should not return status_code=200
for a health check if the tag is present and value is not `False`.
