Patroni was falsely assuming that timelines have diverged.
For pg_rewind it didn't create any problem, but if pg_rewind is not allowed and the `remove_data_directory_on_diverged_timelines` is set, it resulted in reinitializing the former leader.
Close https://github.com/zalando/patroni/issues/2220
This allows to have multiple hosts in a standby_cluster and ensures that the standby leader follows the main cluster's new leader after a switchover.
Partially addresses #2189
When switching certificates there is a race condition with a concurrent API request. If there is one active during the replacement period then the replacement will error out with a port in use error and Patroni gets stuck in a state without an active API server.
Fix is to call server_close after shutdown which will wait for already running requests to complete before returning.
Close#2184
- Simplify setup.py: remove unneeded features and get rid of deprecation warnings
- Compatibility with Python 3.10: handle `threading.Event.isSet()` deprecation
- Make sure setup.py could run without `six`: move Patroni class and main function to the `__main__.py`. The `__init__.py` will have only a few functions used by the Patroni class and from the setup.py
When restore_command is configured Postgres is trying to fetch/apply all possible WAL segments and also fetch history files in order to select the correct timeline. It could result in a situation where the new history file will be missing some timelines.
Example:
- node1 demotes/crashes on timeline 1
- node2 promotes to timeline 2 and archives `00000002.history` and crashes
- node1 recovers as a replica, "replays" `00000002.history` and promotes to timeline 3
As a result, the `00000003.history` will not have the line with timeline 2, because it never replayed any WAL segment from it.
The `pg_rewind` tool is supposed to correctly handle such case when rewinding node2 from node1, but Patroni when deciding whether the rewind should happen was searching for the exact timeline in the history file from the new primary.
The solution is to assume that rewind is required if the current replica timeline is missing.
In addition to that this PR makes sure that the primary isn't running in recovery before starting the procedure of rewind check.
Close https://github.com/zalando/patroni/issues/2118 and https://github.com/zalando/patroni/issues/2124
1. Avoid doing CHECKPOINT if `pg_control` is already updated.
2. Explicitly call ensure_checkpoint_after_promote() right after the bootstrap finished successfully.
When deciding whether the ZNode should be updated we rely on the cached version of the cluster, which is updated only when members ZNodes are deleted/created or the `/status`, `/sync`, `/failover`, `/config`, or `/history` ZNodes are updated.
I.e. after the update of the current member ZNode succeeded the cache becomes stale and all further updates are always performed even if the value didn't change. In order to solve it, we introduce the new attribute in the Zookeeper class and will use it for memorizing the actual value and for later comparison.
In some extreme cases Postgres could be so slow that the normal monitoring query doesn't finish in a few seconds. It results in
the exception being raised from the `Postgresql._cluster_info_state_get()` method, which could lead to the situation that postgres isn't demoted on time.
In order to make it reliable we will catch the exception and use the cached state of postgres (`is_running()` and `role`) to determine whether postgres is running as a primary.
Close https://github.com/zalando/patroni/issues/2073
While doing demote due to failure to update leader lock it could happen that DCS goes completely down and the get_cluster() call raise the exception.
Not being properly handled it results in postgres remaining stopped until DCS recovers.
Due to different reasons, it could happen that WAL archiving on the primary stuck or significantly delayed. If we try to do a switchover or shut it down, the shutdown will take forever and will not finish until the whole backlog of WALs is processed.
In the meantime, Patroni keeps updating the leader lock, which prevents other nodes from starting the leader race even if it is known that they received/applied all changes.
The `Database cluster state:` is changed to `"shut down"` after:
- all data is fsynced to disk and the latest checkpoint is written to WAL
- all streaming replicas confirmed that they received all changes (including the latest checkpoint)
- at the same time, the archiver process continues to do its job and the postmaster process is still running.
In order to solve this problem and make the switchover more reliable/fast in a case when `archive_command` is slow/failing, Patroni will remove the leader key immediately after `pg_controldata` started reporting PGDATA as `"shut down"` cleanly and it verified that there is at least one replica that received all changes. If there are no replicas that fulfill the condition the leader key isn't removed and the old behavior is retained, i.e. Patroni will keep updating it.
This field notes the last time (as unix epoch) a cluster member has successfully communicated with the DCS. This is useful to identify and/or analyze network partitions.
Also, expose dcs_last_seen in the MemberStatus class and its from_api_response() method.
Add support for ETCD SRV name suffix as per description in ETCD dosc:
> The -discovery-srv-name flag additionally configures a suffix to the SRV name that is queried during discovery. Use this flag to differentiate between multiple etcd clusters under the same domain. For example, if discovery-srv=example.com and -discovery-srv-name=foo are set, the following DNS SRV queries are made:
>
> _etcd-server-ssl-foo._tcp.example.com
> _etcd-server-foo._tcp.example.com
All test passes, but not been tested on the live ETCD system yet... Please, take a look and send feedback.
Resolves#2028
If configured, only IPs that matching rules would be allowed to call unsafe endpoints.
In addition to that, it is possible to automatically include IPs of members of the cluster to the list.
If neither of the above is configured the old behavior is retained.
Partially address https://github.com/zalando/patroni/issues/1734
- Resolve Node IP for every connection attempt
- Handle exception with connection failures due to failed resolve
- Set PySyncObj DNS Cache timeouts aligned with `loop_wait` and `ttl`
In addition to that, postpone the leader race for freshly started Raft nodes. It will help with the situation when the leader node was alone and demoted the Postgres and after that, the replica arrives, and quickly takes the leader lock without really performing the leader race.
Close https://github.com/zalando/patroni/issues/1930, https://github.com/zalando/patroni/issues/1931
The #1527 introduced a feature of updating `/optime/leader` with the location of the last checkpoint after the Postgres was shutdown cleanly.
If wal archiving is enabled, Postgres always switching the WAL file before writing the checkpoint shutdown record. Normally it is not an issue, but for databases without too much write activity it could lead to the situation that the visible replication lag becomes equal to the size of a single WAL file. In fact, the previous WAL file is mostly empty and contains only a few records.
Therefore it should be safe to report the LSN of the SWITCH record before the shutdown checkpoint.
In order to do that, Patroni first gets the output of the pg_controldata and based on it calls pg_waldump two times:
* The first call reads the checkpoint record (and verifies that this is really the shutdown checkpoint).
* The next call reads the previous record and in case if it is the 'xlog switch' (for 9.3 and 9.4) or 'SWITCH' (for 9.5+), the LSN
of the SWITCH record is written to the `/optime/leader`.
In case of any mismatch, failure to call pg_waldump or parse its output, the old behavior is retained, i.e. `Latest checkpoint location` from the pg_controldata is used.
Close https://github.com/zalando/patroni/issues/1860
Old versions of `kazoo` immediately discarded all requests to Zookeeper if the connection is in the `SUSPENDED` state. This is absolutely fine because Patroni is handling retries on its own.
Starting from 2.7, kazoo started queueing requests instead of discarding and as a result, the Patroni HA loop was getting stuck until the connection to Zookeeper is reestablished, causing no demote of the Postgres.
In order to return to the old behavior we override the `KazooClient._call()` method.
In addition to that, we ensure that the `Postgresql.reset_cluster_info_state()` method is called even if DCS failed (the order of calls was changed in the #1820).
Close https://github.com/zalando/patroni/issues/1981
When joining already running Postgres, Patroni ensures that config files are set according to expectations.
With recovery parameters converted to GUCs in Postgres v12 it became a little problem, because when the `Postgresql` object is being created it is not yet known where the given replica is supposed to stream from.
It resulted in postgresql.conf first being written without recovery parameters, and on the next run of HA loop Patroni noticing inconsistencies and updating the config one more time.
For Postgres v12 it is not a big issue, but for v13+ it resulted in interruption of streaming replication.
PostgreSQL 14 changed the behavior of replicas when certain parameters (like for example `max_connections`) are changed (increased): https://github.com/postgres/postgres/commit/15251c0a.
Instead of immediately exiting Postgres 14 pauses replication and waits for actions from the operator.
Since the `pg_is_wal_replay_paused()` returning `True` is the only indicator of such a change, Patroni on the replica will call the `pg_wal_replay_resume()`, which would cause either continue replication or shutdown (like previously).
So far Patroni was never calling `pg_wal_replay_resume()` on its own, therefore, to remain backward compatible it will call it only for PostgreSQL 14+.
1. When everything goes normal, only one line will be written for every run of HA loop (see examples):
```
INFO: no action. I am (postgresql0) the leader with the lock
INFO: no action. I am a secondary (postgresql1) and following a leader (postgresql0)
```
2. The `does not have lock` became a debug message.
3. The `Lock owner: postgresql0; I am postgresql1` will be shown only when stream doesn't look normal.
Promoting the standby cluster requires updating load-balancer health checks, which is not very convenient and easy to forget.
In order to solve it, we change the behavior of the `/leader` health-check endpoint. It will return 200 without taking into account whether PostgreSQL is running as the primary or the standby_leader.
It could happen that the replica for some reason is missing the WAL file required by the replication slot.
The nature of this phenomenon is a bit unclear, it might be that the WAL was recycled short before we copied the slot file, but, we still need a solution to this problem. If the `pg_replication_slot_advance()` fails with the `UndefinedFile` exception (requested WAL segment pg_wal/... has already been removed), the logical slot on the replica must be recreated.
When the unix_socket_directories is not known Patroni was immediately going back to tcp connection via the localhost.
The bug was introduced in https://github.com/zalando/patroni/pull/1865
and run raft behave tests with encryption enabled.
Using the new `pysyncobj` release allowed us to get rid of a lot of hacks with accessing private properties and methods of the parent class and reduce the size of the `raft.py`.
Close https://github.com/zalando/patroni/issues/1746
Effectively, this PR consists of a few changes:
1. The easy part:
In case of permanent logical slots are defined in the global configuration, Patroni on the primary will not only create them, but also periodically update DCS with the current values of `confirmed_flush_lsn` for all these slots.
In order to reduce the number of interactions with DCS the new `/status` key was introduced. It will contain the json object with `optime` and `slots` keys. For backward compatibility the `/optime/leader` will be updated if there are members with old Patroni in the cluster.
2. The tricky part:
On replicas that are eligible for a failover, Patroni creates the logical replication slot by copying the slot file from the primary and restarting the replica. In order to copy the slot file Patroni opens a connection to the primary with `rewind` or `superuser` credentials and calls `pg_read_binary_file()` function.
When the logical slot already exists on the replica Patroni periodically calls `pg_replication_slot_advance()` function, which allows moving the slot forward.
3. Additional requirements:
In order to ensure that primary doesn't cleanup tuples from pg_catalog that are required for logical decoding, Patroni enables `hot_standby_feedback` on replicas with logical slots and on cascading replicas if they are used for streaming by replicas with logical slots.
4. When logical slots are copied from to the replica there is a timeframe when it could be not safe to use them after promotion. Right now there is no protection from promoting such a replica. But, Patroni will show the warning with names of the slots that might be not safe to use.
Compatibility.
The `pg_replication_slot_advance()` function is only available starting from PostgreSQL 11. For older Postgres versions Patroni will refuse to create the logical slot on the primary.
The old "permanent slots" feature, which creates logical slots right after promotion and before allowing connections, was removed.
Close: https://github.com/zalando/patroni/issues/1749
The old strategy was waiting for 1 second and hoping that we will get an update event from the WATCH connection.
Unfortunately, it didn't work well in practice. Instead, we will get the current value from the API by performing an explicit read request.
Close https://github.com/zalando/patroni/issues/1767
This commit makes it possible to configure the maximum lag (`maximum_lag_on_syncnode`) after which Patroni will "demote" the node from synchronous and replace it with another node.
The previous implementation always tried to stick to the same synchronous nodes (even if they are not optimal ones).
It could happen that one of etcd servers is not accessible on Patroni start.
In this case Patroni was trying to perform authentication and exiting, while it should exit only if Etcd explicitly responded with the `AuthFailed` error.
Close https://github.com/zalando/patroni/issues/1805
the good old python-consul is not maintained for a few years in a row, therefore someone forked under a different name, but package files are installed into the same location as for the old.
The API of both modules is mostly compatible therefore it wasn't hard to add the support of both modules in Patroni.
Taking into account that python-consul is not a direct requirement for Patroni, but extra, now the end-user has a choice what to install.
Close https://github.com/zalando/patroni/issues/1810
1. Fix flaky behave tests with zookeeper. First, install/start binaries (zookeeper/localkube) and only after that continue with installing requirements and running behave. Previously zookeeper didn't had enough time to start and tests sometimes were failing.
2. Fix flaky raft tests. Despite observations of MacOS slowness, for some unknown reason the delete test with a very small timeout was not timing out, but succeeding, causing unit-tests to fail. The solution - do not rely on the actual timeout, but mock it.
1. If the superuser name is different from postgres, the pg_rewind in the standby cluster was failing because the connection string didn't contain the database name.
2. Provide output if the single-user mode recovery failed.
Close https://github.com/zalando/patroni/pull/1736
Python 3.8 changed the way how exceptions raised from the Thread.run() method are handled.
It resulted in unit-tests showing a couple of warnings. They are not important and we just silence them.
