- Fixed issues with has_permanent_slots() method. It didn't took into account the case of permanent physical slots for members, falsely concluding that there are no permanent slots.
- Write to the status key only LSNs for permanent slots (not just for slots that exist on the primary).
- Include pg_current_wal_flush_lsn() to slots feedback, so that slots on standby nodes could be advanced
- Improved behave tests:
- Verify that permanent slots are properly created on standby nodes
- Verify that permanent slots are properly advanced, including DCS failsafe mode
- Verify that only permanent slots are written to the `/status`
Cache creates a lot of problems and prevents implementing a feature of automatic retention of physical replication slots for members with configurable retention policy.
Just read the entire cluster from Zookeeper instead and use watchers only for the `/leader` and `/config` keys.
1. Introduce DEBUG logs for callbacks
2. Configure log format in behave tests to include filename, line, and method name that triggered the callback and enable DEBUG logs for `patroni.postgresql.callback_executor` module.
P.S. unfortunately it works only starting from python 3.8, but it should be good enough for debug purpose because 3.7 is already EOL.
- get rid from sleeps
- reduce retry_timeout
- avoid graceful Patroni shut down while DCS is "paused", just kill
Patroni and after that gracefully stop postgres
- don't try to delete Pod when Patroni is killed. If K8s API is paused it takes ages
The run time on my laptop is reduced from 2m to 1m28s.
Patroni doesn't watch on all changes of member keys in order to not create too much load on ZooKeeper, but only subscribes to changes (ZNodes added or deleted) in the `/member` directory. Therefore when some important fields in the value are updated we remove and recreate ZNode in order to notify the leader or other members.
The leader should remove the member key only when the `checkpoint_after_promote` value is changed and replicas when the `state` is changed to/from `running`.
We don't care about the `version` field, because Patroni version can't be changed without restart, what will case ZooKeeper `session_id` to change it anyway.
This fix hopefully will reduce failures of behave tests on GH Actions.
Create permanent physical replication slots on standby nodes and use `pg_replication_slot_advance()` function to move them forward.
The `restart_lsn` is advanced based on values stored in the `/status` key by the primary node.
When slot is created on a replica it could be ahead the same slot on the primary and therefore there is some period of time when it doesn't protect WAL files from being recycled.
* Use virtualenv to install tox in behave Dockerfile
Upstream change in postgres docker image uses debian restriction on
installing system-wide non-debian python packages. Debian doesn't
provide a tox>=4, so we need to install with pip.
* Exclude all output directories generated using `tox-wrapper.sh`
The `tox-wrapper.sh` script created by `features/Dockerfile` creates
directories like features/output-tox-pg14-docker-behave-etcd-lin-973719674/
* Reduce footprint of tox behave docker image
1. Take client certificates only from the `ctl` section. Motivation: sometimes there are server-only certificates that can't be used as client certificates. As a result neither Patroni not patronictl work correctly even if `--insecure` option is used.
2. Document that if `restapi.verify_client` is set to `required` then client certificates **must** be provided in the `ctl` section.
3. Add support for `ctl.authentication` and prefer to use it over `restapi.authentication`.
4. Silence annoying InsecureRequestWarning when `patronictl -k` is used, so that behavior becomes is similar to `curl -k`.
To do that we use `pg_stat_get_wal_receiver()` function, which is available since 9.6. For older versions the `patronictl list` output and REST API responses remain as before.
In case if there is no wal receiver process we check if `restore_command` is set and show the state as `in archive recovery`.
Example of `patronictl list` output:
```bash
$ patronictl list
+ Cluster: batman -------------+---------+---------------------+----+-----------+
| Member | Host | Role | State | TL | Lag in MB |
+-------------+----------------+---------+---------------------+----+-----------+
| postgresql0 | 127.0.0.1:5432 | Leader | running | 12 | |
| postgresql1 | 127.0.0.1:5433 | Replica | in archive recovery | 12 | 0 |
+-------------+----------------+---------+---------------------+----+-----------+
$ patronictl list
+ Cluster: batman -------------+---------+-----------+----+-----------+
| Member | Host | Role | State | TL | Lag in MB |
+-------------+----------------+---------+-----------+----+-----------+
| postgresql0 | 127.0.0.1:5432 | Leader | running | 12 | |
| postgresql1 | 127.0.0.1:5433 | Replica | streaming | 12 | 0 |
+-------------+----------------+---------+-----------+----+-----------+
```
Example of REST API response:
```bash
$ curl -s localhost:8009 | jq .
{
"state": "running",
"postmaster_start_time": "2023-07-06 13:12:00.595118+02:00",
"role": "replica",
"server_version": 150003,
"xlog": {
"received_location": 335544480,
"replayed_location": 335544480,
"replayed_timestamp": null,
"paused": false
},
"timeline": 12,
"replication_state": "in archive recovery",
"dcs_last_seen": 1688642069,
"database_system_identifier": "7252327498286490579",
"patroni": {
"version": "3.0.3",
"scope": "batman"
}
}
$ curl -s localhost:8009 | jq .
{
"state": "running",
"postmaster_start_time": "2023-07-06 13:12:00.595118+02:00",
"role": "replica",
"server_version": 150003,
"xlog": {
"received_location": 335544816,
"replayed_location": 335544816,
"replayed_timestamp": null,
"paused": false
},
"timeline": 12,
"replication_state": "streaming",
"dcs_last_seen": 1688642089,
"database_system_identifier": "7252327498286490579",
"patroni": {
"version": "3.0.3",
"scope": "batman"
}
}
```
If we know for sure that a few moments ago postgres was still running as a primary and we still have the leader lock and can successfully update it, in this case we can safely start postgres back not in recovery. That will allow to avoid bumping timeline without a reason and hopefully improve reliability because it will address issues similar to #2720.
In addition to that remove `if self.state_handler.is_starting()` check from the `recover()` method. This branch could never be reached because the `starting` state is handled earlier in the `_run_cycle()`. Besides that remove redundant `self._crash_recovery_executed`.
P.S. now we do not cover cases when Patroni was killed along with Postgres.
Lets consider that we just started Patroni, there is no leader, and `pg_controldata` reports `Database cluster state` as `shut down`. It feels logical to use `Latest checkpoint location` and `Latest checkpoint's TimeLineID` to do a usual leader race and start directly as a primary, but it could be totally wrong. The thing is that we run `postgres --single` if standby wasn't shut down cleanly before executing `pg_rewind`. As a result `Database cluster state` transition from `in archive recovery` to `shut down`, but if such a node becomes a leader the timeline must be increased.
Reorder some checks and verify that the old primary is already in the `running` state before checking replication. This check elliminates the race condition when replication started to work but node name is removed from the `synchronous_standby_names` because state isn't `running`.
When starting check if node with the same is registered in DCS and try to query it's REST API.
If REST API is accessible exit with the error.
Close#1804
Previously, integer gucs, for example `max_connections` would not pass the validation, as these settings have no unit, if and only if they were specified as a string.
This causes problems if the `max_connections` is configured in `patroni.yaml` as a string, for example, the following configuration would not result in the right `max_connections` settings, as `max_connections` is configured as a string:
bootstrap:
dcs:
postgresql:
parameters:
log_checkpoints: "on"
log_connections: "off"
max_connections: "57"
Allowing a user to specify *all* parameters as a string was accepted before in Patroni and also seems very useful, as many of us will be using Ansible/Helm/Golang to build a Patroni configuration, in which creating a `map[string]string` is easier than having to deal with data types.
Attemps to address issue #2735
Regression was introduced in https://github.com/zalando/patroni/commit/76b3b99de2f2bfaa8ab2df9e47dbfc3749d14e84
* Reduce flakiness of citus behave tests
- make a few attempts with timeout when checking registered nodes
- get rid from artificial sleep
- allow check_registration() function to check secondaries
These changes are useful for Quorum based failover (#2668) and future PR
that enhances Citus support by registering secondaries in `pg_dist_node`.
Starting from 1.27 there is containerd process, which also uses k3s binary and being detected by pidof. Therefore we will search for "k3s server" string in the process list instead of just "k3s".
Allows for running behave tests with an alternative base image
than the official postgres image.
Also provides a PG_USER/PG_GROUP should that be different to the
default `postgres`.
Sometimes MacOS workers are so slow that Postgres shutdown might take more than 30s-40s, what breaks a test with replica reinit in parallel with the primary restart, because basebackup() does only two attempts and in a pause the replica remains running with empty PGDATA.
In addition to that increase timeouts in ignore_slots test.
Close#2637
* Ignore D401 in flake8-docstrings
* Fix newly reported flake8 issues, ignore the old W503 rule
* rely on concatenation of adjecent strings
* Format behave scripts
* Reformat ha.py according to new rules
Co-authored-by: Alexander Kukushkin <[email protected]>
We made incorrect assumption that `citus_set_coordinator_host()` will trigger `pg_dist_node` sync. Instead we should also use `citus_update_node()` and call `citus_set_coordinator_host()` only during the bootstrap.
Adjust behave tests to verify that coordinator failover is visible on workers.
* bump version
* update release notes
* removed 2.7, 3.4, 3.5, and 3.6 from supported versions in setup.py
* switched GH actions back to ubuntu-latest, removed tests with 2.7 and 3.6, and added 3.11
* some little fixes in Citus documentation and behave tests
keep as much backward compatibility as possible.
Following changes were made:
1. All internal checks are performed as `role in ('master', 'primary')`
2. All internal variables/functions/methods are renamed
3. `GET /metrics` endpoint returns `patroni_primary` in addition to `patroni_master`.
4. Logs are changed to use leader/primary/member/remote depending on the context
5. Unit-tests are using only role = 'primary' instead of 'master' to verify that 1 works.
6. patronictl still supports old syntax, but also accepts `--leader` and `--primary`.
7. `master_(start|stop)_timeout` is automatically translated to `primary_(start|stop)_timeout` if the last one is not set.
8. updated the documentation and some examples
Future plan: in the next major release switch role name from `master` to `primary` and maybe drop `master` altogether.
The Kubernetes implementation will require more work and keep two labels in parallel. Label values should probably be configurable as described in https://github.com/zalando/patroni/issues/2495.
Alexander Kukushkin