* update release notes
* bump version
* change the default alignment in patronictl table output to `left`
* add missing tests
* add missing pieces to the documentation
So far Patroni was performing a comparison of the old value (in the `pg_settings`) with the new value (from Patroni configuration or from DCS) in order to figure out if reload or restart is required when the parameter has been changed. If the given parameter was missing in the `pg_settings` Patroni was ignoring it and not writing into the `postgresql.conf`.
In case if Postgres is not running, no validation has been performed and parameters and values were written into the config as it is.
It is not a very common mistake, but people tend to mistype parameter names or values.
Also, it happens that some parameters are removed in specific Postgres versions and some new are added (e.g. `checkpoint_segments` replaced with `min_wal_size` and `max_wal_size` in 9.5 or` wal_keep_segments` was replaced with `wal_keep_size` in 13).
Writing nonexistent parameters or invalid values into the `postgresql.conf` makes postgres unstartable.
This change doesn't solve the issue 100%, but at least approaching this goal very close.
Call a fencing script after acquiring the leader lock. If the script didn't finish successfully - don't promote but remove leader key
Close https://github.com/zalando/patroni/issues/1567
For init processes that use a symlinked WAL directory, or use custom scripts that create new tablespaces, these directories should also be renamed after a failed init attempt, as currently the following errors occur if the first init attempt failed, but a second one might succeed:
fixing permissions on existing directory /var/lib/postgresql/data ... ok
initdb: error: directory "/var/lib/postgresql/wal/pg_wal" exists but is not empty
[...]
File "/usr/lib/python3/dist-packages/patroni/ha.py", line 1173, in post_bootstrap
self.cancel_initialization()
File "/usr/lib/python3/dist-packages/patroni/ha.py", line 1168, in cancel_initialization
raise PatroniException('Failed to bootstrap cluster')
patroni.exceptions.PatroniException: 'Failed to bootstrap cluster'
In the remove_data_directory function the same happens for removing the data directory, it seems the same kind of thing should also happen when moving a data directory.
To ensure the data directory can still be used, the symlinks will point to the renamed directories.
The new parameter `synchronous_node_count` is used by Patroni to manage number of synchronous standby databases. It is set to 1 by default. It has no effect when synchronous_mode is set to off. When enabled, Patroni manages precise number of synchronous standby databases based on parameter synchronous_node_count and adjusts the state in DCS & synchronous_standby_names as members join and leave.
This functionality can be further extended to support Priority (FIRST n) based synchronous replication & Quorum (ANY n) based synchronous replication in future.
The only python-etcd3 client working directly via gRPC still supports only a single endpoint, which is not very nice for high-availability.
Since Patroni is already using a heavily hacked version of python-etcd with smart retries and auto-discovery out-of-the-box, I decided to enhance the existing code with limited support of v3 protocol via gRPC-gateway.
Unfortunately, watches via gRPC-gateway requires us to open and keep the second connection to the etcd.
Known limitations:
* The very minimal supported version is 3.0.4. On earlier versions transactions don't work due to bugs in grpc-gateway. Without transactions we can't do atomic operations, i.e. leader locks.
* Watches work only starting from 3.1.0
* Authentication works only starting from 3.3.0
* gRPC-gateway does not support authentication using TLS Common Name. This is because gRPC-proxy terminates TLS from its client so all the clients share a cert of the proxy: https://github.com/etcd-io/etcd/blob/master/Documentation/op-guide/authentication.md#using-tls-common-name
So far Patroni was parsing `recovery.conf` or querying `pg_settings` in order to get the current values of recovery parameters. On PostgreSQL earlier than 12 it could easily happen that the value of `primary_conninfo` in the `recovery.conf` has nothing to do with reality. Luckily for us, on PostgreSQL 9.6+ there is a `pg_stat_wal_receiver` view, which contains current values of `primary_conninfo` and `primary_slot_name`. The password field is masked through, but this is fine, because authentication happens only during opening the connection. All other parameters we compare as usual.
Another advantage of `pg_stat_wal_recevier` - it contains the current timeline, therefore on 9.6+ we don't need to use the replication connection trick if walreceiver process is alive.
If there is no walreceiver process available or it is not streaming we will stick to old methods.
when Patroni is trying to figure out the necessity of pg_rewind it could write the content history file from the primary into the log. The history file is growing with every failover/switchover and eventually starts taking too many lines in the log, most of them are not so much useful.
Instead of showing the raw data, we will show only 3 lines before the current replica timeline and 2 lines after.
## Feature: Postgres stop timeout
Switchover/Failover operation hangs on signal_stop (or checkpoint) call when postmaster doesn't respond or hangs for some reason(Issue described in [1371](https://github.com/zalando/patroni/issues/1371)). This is leading to service loss for an extended period of time until the hung postmaster starts responding or it is killed by some other actor.
### master_stop_timeout
The number of seconds Patroni is allowed to wait when stopping Postgres and effective only when synchronous_mode is enabled. When set to > 0 and the synchronous_mode is enabled, Patroni sends SIGKILL to the postmaster if the stop operation is running for more than the value set by master_stop_timeout. Set the value according to your durability/availability tradeoff. If the parameter is not set or set <= 0, master_stop_timeout does not apply.
It is a regular issue that primary is recycling WALs when one of the replicas is down for a long time. So far there were only two solutions for such a problem and both of them are not perfect:
1. Increase `wal_keep_segments`, but it is hard to guess the good value.
2. Use continuous archiving and PITR, but it is not always possible.
This PR is introducing the way to solve the problem for static clusters, with a fixed number of nodes and names that never change. You just need to list the names of all nodes in the `slots` so the primary will not remove the slot when the node is down (not registered in DCS).
Of course, the primary will not create the permanent slot which is matching its own name.
Usage example: let's assume you have a cluster with nodes named *abc1*, *abc2*, and *abc3*.
You have to run `patronictl edit-config` and put the following snippet into the configuration:
```yaml
slots:
abc1:
type: physical
abc2:
type: physical
abc3:
type: physical
```
If the node *abc2* is the primary, it will always create slots for *abc1* and *abc3* even if they are not running, but will not create slot *abc2*.
Other nodes will behave the same.
Close#280
Starting from PostgreSQL 12 the following recovery parameters could be changed without restart, but Patroni didn't yet support it:
* archive_cleanup_command
* promote_trigger_file
* recovery_end_command
* recovery_min_apply_delay
In future postgres releases this list will be extended and Patroni will support it automatically.
Previously check_recovery_conf() function was only checking whether primary_conninfo has changed and never taking into account all other recovery parameters.
Fixes https://github.com/zalando/patroni/issues/1201
Not doing so makes it hard to implement callbacks in bash and eventually can lead to the situation when two callbacks are running at the same time. In case if we failed to kill the child process we will still wait for it to finish.
The same problem could happen with custom bootstrap, therefore if we happen to kill the custom bootstrap process we also kill all child subprocesses.
Closes https://github.com/zalando/patroni/issues/1238
Recently it has happened two times when people tried to deploy the new cluster but postgres data directory wasn't empty and also wasn't valid. In this case Patroni was still creating initialize key in DCS and trying to start the postgres up.
Now it will complain about non-empty invalid postgres data directory and exit.
Close https://github.com/zalando/patroni/issues/1216
In addition to that try to protect from the case when some recovery parameters are set in one of included files by explicitly setting their value to an empty string on postgres 12.
Simplifies https://github.com/zalando/patroni/pull/1208
It is possible that some config files are not controlled by Patroni and when somebody is doing reload via REST API or by sending SIGHUP to Patroni process the usual expectation is that postgres will also be reloaded, but it didn't happen when there were no changes in the postgresql section of Patroni config.
For example one might replace ssl_cert_file and ssl_key_file on the filesystem and starting from PostgreSQL 10 it just requires a reload, but Patroni wasn't doing it.
In addition to that fix the issue with handling of `wal_buffers`. The default value depends on `shared_buffers` and `wal_segment_size` and therefore Patroni was exposing pending_restart when the new value in the config was explicitly set to -1 (default).
Close https://github.com/zalando/patroni/issues/1198
* use `SHOW primary_conninfo` instead of parsing config file on pg12
* strip out standby and recovery parameters from postgresql.auto.conf before starting the postgres 12
Patroni config remains backward compatible.
Despite for example `restore_command` converted to a GUC starting from postgresql 12, in the Patroni configuration you can still keep it in the `postgresql.recovery_conf` section.
If you put it into `postgresql.parameters.restore_command`, that will also work, but it is important not to mix both ways:
```yaml
# is OK
postgresql:
parameters:
restore_command: my_restore_command
archive_cleanup_command: my_archive_cleanup_command
# is OK
postgresql:
recovery_conf:
restore_command: my_restore_command
archive_cleanup_command: my_archive_cleanup_command
# is NOT ok
postgresql:
parameters:
restore_command: my_restore_command
recovery_conf:
archive_cleanup_command: my_archive_cleanup_command
```
* Convert postgresql.py into a package
* Factor out cancellable process into a separate class
* Factor out connection handler into a separate class
* Move postmaster into postgresql package
* Factor out pg_rewind into a separate class
* Factor out bootstrap into a separate class
* Factor out slots handler into a separate class
* Factor out postgresql config handler into a separate class
* Move callback_executor into postgresql package
This is just a careful refactoring, without code changes.
* expose the current patroni version in DCS
* expose `checkpoint_after_promote` flag in DCS as an indicator that pg_rewind could be safely executed
* other nodes will wait until this flag is set instead of connecting as superuser and issuing the CHECKPOINT
* define `postgresql.authention.rewind` with credentials for pg_rewind in patroni configuration files.
* create user for pg_rewind if postgres is 11+
* grant execute on functions required for pg_rewind to rewind user
This functionality works similarly to the `pg_hba`:
If the `postgresql.pg_ident` is defined in the config file or DCS, Patroni will write its value to pg_ident.conf, however, if `postgresql.parameters.ident_file` is defined, Patroni will assume that pg_ident is managed from outside and not update the file.
First of all, this patch changes the behavior of `on_start`/`on_restart` callbacks, they will be called only when postgres is started or restarted without role changes. In case if the member is promoted or demoted only the `on_role_change` callback will be executed. `on_role_change` was never called for standby leader, only `on_start`/`on_restart` and with a wrong role argument.
Before that `on_role_change` was never called for standby leader, only `on_start`/`on_restart` and with a wrong role argument.
In addition to that, the REST API will return standby_leader role for the leader of the standby cluster.
Closes https://github.com/zalando/patroni/issues/988
In addition to that transfer postmaster pid to Patroni process with the help of multiprocessing.Pipe instead of using stdin-stdout pipes.
Closes https://github.com/zalando/patroni/issues/992
If the pg_rewind is disabled or can't be used, the former master could fail to start as a new replica due to diverged timelines. In this case, the only way to fix it is wiping the data directory and reinitializing.
So far Patroni was able to remove the data directory only after failed attempt to run pg_rewind. This commit fixes it.
If the `postgresql.remove_data_directory_on_diverged_timelines` is set, Patroni will wipe the data directory and reinitialize the former master automatically.
Fixes: https://github.com/zalando/patroni/issues/941
Permanent replication slots are preserved on failover/switchover, that is Patroni on the new primary will create configured replication slots right after doing promote.
Slots could be configured with the help of `patronictl edit-config`.
The initial configuration could be also done in the `bootstrap.dcs`
```yaml
slots:
permanent_physical_1:
type: physical
permanent_logical_1:
type: logical
database: foo
plugin: pgoutput
```
It is the responsibility of the operator to make sure that there are no clashes in names between replication slots automatically created by Patroni for members and permanent replication slots.
Closes https://github.com/zalando/patroni/issues/656
* Use `shutil.move` instead of `os.replace`, which is available only from 3.3
* Introduce standby-leader health-check and consul service
* Improve unit tests, some lines were not covered
* rename `assertEquals` -> `assertEqual`, due to deprecation warning
Implementation of "standby cluster" described in #657. Standby cluster consists
of a "standby leader", that replicates from a "remote master" (which is not a
part of current patroni cluster and can be anywhere), and cascade replicas,
that replicate from the corresponding standby leader. "Standby leader" behaves
pretty much like a regular leader, which means that it holds a leader lock in
DSC, in case if disappears there will be an election of a new "standby
leader".
One can define such a cluster using the section "standby_cluster" in patroni
config file. This section provides parameters for standby cluster, that will be
applied only once during bootstrap and can be changed only through DSC.
* Take and apply some parameters from controldata when starting as replica
https://www.postgresql.org/docs/10/static/hot-standby.html#HOT-STANDBY-ADMIN
There is set of parameters which value on the replica must be not smaller than on the primary, otherwise replica will refuse to start:
* max_connections
* max_prepared_transactions
* max_locks_per_transaction
* max_worker_processes
It might happen that values of these parameters in the global configuration are not set high enough, what makes impossible to start a replica without human intervention. Usually it happens when we bootstrap a new cluster from the basebackup.
As a solution to this problem we will take values of above parameters from the pg_controldata output and in case if the values in the global configuration are not high enough, apply values taken from pg_controldata and set `pending_restart` flag.
Upon start postmaster process performs various safety checks if there is a postmaster.pid file in the data directory. Although Patroni already detected that the running process corresponding to the postmaster.pid is not a postmaster, the new postmaster might fail to start, because it thinks that postmaster.pid is already locked.
Important!!! Unlink of postmaster.pid isn't an option in this case, because it has a lot of nasty race conditions.
Luckily there is a workaround to this problem, we can pass the pid from postmaster.pid in the `PG_GRANDPARENT_PID` environment variable and postmaster will ignore it.
More likely to hit such problem if you run Patroni and postgres in the docker container.
