If restarted in pause Patroni was discarding `synchronous_standby_names` from `postgresql.conf` because in the internal cache this values was set to `None`. As a result synchronous replication transitioned to a broken state, with no synchronous replicas according to the `synchronous_standby_names` and Patroni not selecting/setting the new synchronous replicas (another bug).
To solve the problem of broken initial state and to avoid similar issues with other GUC's we will read GUC's value if Patroni is joining running Postgres.
Due to a race condition Patroni was falsely assuming that the standby should be restarted because some recovery parameters (primary_conninfo or similar) were changed.
Close https://github.com/zalando/patroni/issues/2834
Postgres supports two types of permissions:
1. owner only
2. group readable
By default the first one is used because it provides better security. But, sometimes people want to run a backup tool with the user that is different from postgres. In this case the second option becomes very useful. Unfortunately it didn't work correctly because Patroni was creating files with owner access only permissions.
This PR changes the behavior and permissions on files and directories that are created by Patroni will be calculated based on permissions of PGDATA. I.e., they will get group readable access when it is necessary.
Close#1899Close#1901
* Use YAML files to validate Postgres GUCs through Patroni.
Patroni used to have a static list of Postgres GUCs validators in
`patroni.postgresql.validator`.
One problem with that approach, for example, is that it would not
allow GUCs from custom Postgres builds to be validated/accepted.
The idea that we had to work around that issue was to move the
validators from the source code to an external and extendable source.
With that Patroni will start reading the current validators from that
external source plus whatever custom validators are found.
From this commit onwards Patroni will read and parse all YAML files
that are found under the `patroni/postgresql/available_parameters`
directory to build its Postgres GUCs validation rules.
All the details about how this work can be found in the docstring
of the introduced function `_load_postgres_gucs_validators`.
- added pyrightconfig.json with typeCheckingMode=strict
- added type hints to all files except api.py
- added type stubs for dns, etcd, consul, kazoo, pysyncobj and other modules
- added type stubs for psycopg2 and urllib3 with some little fixes
- fixes most of the issues reported by pyright
- remaining issues will be addressed later, along with enabling CI linting task
The two cases we have in mind are:
* In spite of following all best practices client-side, logical replication connections can sometimes hang the Postgres shutdown sequence. We'd like to sigterm any misbehaving logical replication connections which remain after x seconds. These will inevitably get killed anyway on master stop timeout.
* remove "role=master" label on current primary when not using k8s as DCS. Waiting until after Postgres fully stops can sometimes be too long for this.
* Pause pgbouncer connections before switchover
Close#2596
For now it implements:
- CaseInsensitiveDict()
- CaseInsensitiveSet()
Update `patroni.postgresql.sync.parse_sync_standby_names()` to use `CaseInsensitiveSet()` instead of `CaseInsensitiveDict()`
* Ignore D401 in flake8-docstrings
* Fix newly reported flake8 issues, ignore the old W503 rule
* rely on concatenation of adjecent strings
* Format behave scripts
* Reformat ha.py according to new rules
Co-authored-by: Alexander Kukushkin <[email protected]>
It could happen that Patroni is started up before PGDATA was mounted. In this case Patroni can't determine major Postgres version from PG_VERSION file. Later, when PGDATA is mounted, Patroni was trying to create the recovery.conf even if the actual Postgres major version is newver than 12.
To mitigate the problem we double check that the `Postgresql._major_version` is set before writing recovery configuration or starting postgres up.
Close https://github.com/zalando/patroni/issues/2434
Since a long time Patroni enforcing only one callback script running at a time. If the new callback is executed while the old one is still running, the old one is killed (including all child processes).
Such behavior is fine for all callbacks but on_reload, because the last one may accidentally cancel important ones, that for example updating DNS or assigning/removing Virtual IP.
To mitigate the problem we introduce a dedicated executor for on_reload callbacks, so that on_reload may only cancel another on_reload.
Ref: https://github.com/zalando/patroni/issues/2445
keep as much backward compatibility as possible.
Following changes were made:
1. All internal checks are performed as `role in ('master', 'primary')`
2. All internal variables/functions/methods are renamed
3. `GET /metrics` endpoint returns `patroni_primary` in addition to `patroni_master`.
4. Logs are changed to use leader/primary/member/remote depending on the context
5. Unit-tests are using only role = 'primary' instead of 'master' to verify that 1 works.
6. patronictl still supports old syntax, but also accepts `--leader` and `--primary`.
7. `master_(start|stop)_timeout` is automatically translated to `primary_(start|stop)_timeout` if the last one is not set.
8. updated the documentation and some examples
Future plan: in the next major release switch role name from `master` to `primary` and maybe drop `master` altogether.
The Kubernetes implementation will require more work and keep two labels in parallel. Label values should probably be configurable as described in https://github.com/zalando/patroni/issues/2495.
When `synchronous_standby_names` GUC is changed PostgreSQL nearly immediately starts reporting corresponding walsenders as synchronous, while in fact they maybe didn't reach this state yet. To mitigate this problem we memorize current flush lsn on the primary right after change of `synchronous_standby_names` got visible and use it as an additional check for walsenders.
The walsender will be counted as truly "sync" only when write/flush/replay_lsn on it reached memorized LSN and the `application_name` is known to be a part of `synchronous_standby_names`.
The size of PR mostly related to refactoring and moving the code responsible for working with `synchronous_standby_names` and `pg_stat_replication` to the dedicated file.
And `parse_sync_standby_names()` function was mostly copied from #672.
If the cluster is stable (no nodes are joining/leaving/lagging) we want to run at most one monitor query per every HA loop. So far it worker perfectly except when synchronous_mode is enabled, where we run two additional queries:
1. SHOW synchronous_mode
2. SELECT ... FROM pg_stat_replication
In order to solve it, we will include these "queries" to the common monitoring query is synchronous_mode is enabled.
In addition to that make sure that `synchronous_standby_names` is reset on replicas that used to be a primary and avoid using replicas which are not in the 'running' state.
P.S.: in the monitoring query we also extract the current value of synchronous_standby_names, because it will be useful for the quorum commit feature.
Close https://github.com/zalando/patroni/issues/2469
Windows doesn't support `SIGTERM`, but our behave tests in majority of cases relying on Patroni graceful shutdown.
In order to emulate the behaviour we introduced the new REST API endpoint `POST /sigterm`. The endpoint works only on Windows and when `BEHAVE_DEBUG` environment variable is set.
Besides that some minor adjustments in behave tests were done. Mainly related to backslash-slash handling.
In addition to that improve test coverage on Windows by properly mocking access to filesystem and avoiding calling
`subprocess.call()`. Specifically, symlink creation on Windows requires Admin privileges and there is no `true.exe`.
When starting as a replica it may take some time before Postgres starts accepting new connections, but meanwhile, it could happen that the leader transitioned to a different member and the `primary_conninfo` must be updated.
On pre v12 Patroni regularly checks `recovery.conf` in order to check that recovery parameters match the expectation. Starting from v12 recovery parameters were converted to GUC's and Patroni gets current values from the `pg_settings` view. The last one creates a problem when it takes more than a minute for Postgres to start accepting new connections.
Since Patroni attempts to execute at least `pg_is_in_recovery()` every HA loop, and it is raising at exception, the `check_recovery_conf()` effectively wasn't reachable until recovery is finished, but it changed when #2082 was introduced.
As a result of #2082 we got the following behavior:
1. Up to v12 (not including) everything was working as expected
2. v12 and v13 - Patroni restarting Postgres after 1m of recovery
3. v14+ - the `check_recovery_conf()` is not executed because the `replay_paused()` method raising an exception.
In order to properly handle changes of recovery parameters or leader transitioned to a different node on v12+, we will rely on the cached values of recovery parameters until Postgres becomes ready to execute queries.
Close https://github.com/zalando/patroni/issues/2289
This allows to have multiple hosts in a standby_cluster and ensures that the standby leader follows the main cluster's new leader after a switchover.
Partially addresses #2189
In some extreme cases Postgres could be so slow that the normal monitoring query doesn't finish in a few seconds. It results in
the exception being raised from the `Postgresql._cluster_info_state_get()` method, which could lead to the situation that postgres isn't demoted on time.
In order to make it reliable we will catch the exception and use the cached state of postgres (`is_running()` and `role`) to determine whether postgres is running as a primary.
Close https://github.com/zalando/patroni/issues/2073
Due to different reasons, it could happen that WAL archiving on the primary stuck or significantly delayed. If we try to do a switchover or shut it down, the shutdown will take forever and will not finish until the whole backlog of WALs is processed.
In the meantime, Patroni keeps updating the leader lock, which prevents other nodes from starting the leader race even if it is known that they received/applied all changes.
The `Database cluster state:` is changed to `"shut down"` after:
- all data is fsynced to disk and the latest checkpoint is written to WAL
- all streaming replicas confirmed that they received all changes (including the latest checkpoint)
- at the same time, the archiver process continues to do its job and the postmaster process is still running.
In order to solve this problem and make the switchover more reliable/fast in a case when `archive_command` is slow/failing, Patroni will remove the leader key immediately after `pg_controldata` started reporting PGDATA as `"shut down"` cleanly and it verified that there is at least one replica that received all changes. If there are no replicas that fulfill the condition the leader key isn't removed and the old behavior is retained, i.e. Patroni will keep updating it.
The #1527 introduced a feature of updating `/optime/leader` with the location of the last checkpoint after the Postgres was shutdown cleanly.
If wal archiving is enabled, Postgres always switching the WAL file before writing the checkpoint shutdown record. Normally it is not an issue, but for databases without too much write activity it could lead to the situation that the visible replication lag becomes equal to the size of a single WAL file. In fact, the previous WAL file is mostly empty and contains only a few records.
Therefore it should be safe to report the LSN of the SWITCH record before the shutdown checkpoint.
In order to do that, Patroni first gets the output of the pg_controldata and based on it calls pg_waldump two times:
* The first call reads the checkpoint record (and verifies that this is really the shutdown checkpoint).
* The next call reads the previous record and in case if it is the 'xlog switch' (for 9.3 and 9.4) or 'SWITCH' (for 9.5+), the LSN
of the SWITCH record is written to the `/optime/leader`.
In case of any mismatch, failure to call pg_waldump or parse its output, the old behavior is retained, i.e. `Latest checkpoint location` from the pg_controldata is used.
Close https://github.com/zalando/patroni/issues/1860
When joining already running Postgres, Patroni ensures that config files are set according to expectations.
With recovery parameters converted to GUCs in Postgres v12 it became a little problem, because when the `Postgresql` object is being created it is not yet known where the given replica is supposed to stream from.
It resulted in postgresql.conf first being written without recovery parameters, and on the next run of HA loop Patroni noticing inconsistencies and updating the config one more time.
For Postgres v12 it is not a big issue, but for v13+ it resulted in interruption of streaming replication.
PostgreSQL 14 changed the behavior of replicas when certain parameters (like for example `max_connections`) are changed (increased): https://github.com/postgres/postgres/commit/15251c0a.
Instead of immediately exiting Postgres 14 pauses replication and waits for actions from the operator.
Since the `pg_is_wal_replay_paused()` returning `True` is the only indicator of such a change, Patroni on the replica will call the `pg_wal_replay_resume()`, which would cause either continue replication or shutdown (like previously).
So far Patroni was never calling `pg_wal_replay_resume()` on its own, therefore, to remain backward compatible it will call it only for PostgreSQL 14+.
When the unix_socket_directories is not known Patroni was immediately going back to tcp connection via the localhost.
The bug was introduced in https://github.com/zalando/patroni/pull/1865
Effectively, this PR consists of a few changes:
1. The easy part:
In case of permanent logical slots are defined in the global configuration, Patroni on the primary will not only create them, but also periodically update DCS with the current values of `confirmed_flush_lsn` for all these slots.
In order to reduce the number of interactions with DCS the new `/status` key was introduced. It will contain the json object with `optime` and `slots` keys. For backward compatibility the `/optime/leader` will be updated if there are members with old Patroni in the cluster.
2. The tricky part:
On replicas that are eligible for a failover, Patroni creates the logical replication slot by copying the slot file from the primary and restarting the replica. In order to copy the slot file Patroni opens a connection to the primary with `rewind` or `superuser` credentials and calls `pg_read_binary_file()` function.
When the logical slot already exists on the replica Patroni periodically calls `pg_replication_slot_advance()` function, which allows moving the slot forward.
3. Additional requirements:
In order to ensure that primary doesn't cleanup tuples from pg_catalog that are required for logical decoding, Patroni enables `hot_standby_feedback` on replicas with logical slots and on cascading replicas if they are used for streaming by replicas with logical slots.
4. When logical slots are copied from to the replica there is a timeframe when it could be not safe to use them after promotion. Right now there is no protection from promoting such a replica. But, Patroni will show the warning with names of the slots that might be not safe to use.
Compatibility.
The `pg_replication_slot_advance()` function is only available starting from PostgreSQL 11. For older Postgres versions Patroni will refuse to create the logical slot on the primary.
The old "permanent slots" feature, which creates logical slots right after promotion and before allowing connections, was removed.
Close: https://github.com/zalando/patroni/issues/1749
This commit makes it possible to configure the maximum lag (`maximum_lag_on_syncnode`) after which Patroni will "demote" the node from synchronous and replace it with another node.
The previous implementation always tried to stick to the same synchronous nodes (even if they are not optimal ones).
When there is no config key in DCS Patroni shouldn't try accessing ignore_slots, otherwise an exception is raised.
In addition to that implement missing unit-tests and fix linting issues in behave tests.
* update release notes
* bump version
* change the default alignment in patronictl table output to `left`
* add missing tests
* add missing pieces to the documentation
So far Patroni was performing a comparison of the old value (in the `pg_settings`) with the new value (from Patroni configuration or from DCS) in order to figure out if reload or restart is required when the parameter has been changed. If the given parameter was missing in the `pg_settings` Patroni was ignoring it and not writing into the `postgresql.conf`.
In case if Postgres is not running, no validation has been performed and parameters and values were written into the config as it is.
It is not a very common mistake, but people tend to mistype parameter names or values.
Also, it happens that some parameters are removed in specific Postgres versions and some new are added (e.g. `checkpoint_segments` replaced with `min_wal_size` and `max_wal_size` in 9.5 or` wal_keep_segments` was replaced with `wal_keep_size` in 13).
Writing nonexistent parameters or invalid values into the `postgresql.conf` makes postgres unstartable.
This change doesn't solve the issue 100%, but at least approaching this goal very close.
Call a fencing script after acquiring the leader lock. If the script didn't finish successfully - don't promote but remove leader key
Close https://github.com/zalando/patroni/issues/1567
For init processes that use a symlinked WAL directory, or use custom scripts that create new tablespaces, these directories should also be renamed after a failed init attempt, as currently the following errors occur if the first init attempt failed, but a second one might succeed:
fixing permissions on existing directory /var/lib/postgresql/data ... ok
initdb: error: directory "/var/lib/postgresql/wal/pg_wal" exists but is not empty
[...]
File "/usr/lib/python3/dist-packages/patroni/ha.py", line 1173, in post_bootstrap
self.cancel_initialization()
File "/usr/lib/python3/dist-packages/patroni/ha.py", line 1168, in cancel_initialization
raise PatroniException('Failed to bootstrap cluster')
patroni.exceptions.PatroniException: 'Failed to bootstrap cluster'
In the remove_data_directory function the same happens for removing the data directory, it seems the same kind of thing should also happen when moving a data directory.
To ensure the data directory can still be used, the symlinks will point to the renamed directories.
The new parameter `synchronous_node_count` is used by Patroni to manage number of synchronous standby databases. It is set to 1 by default. It has no effect when synchronous_mode is set to off. When enabled, Patroni manages precise number of synchronous standby databases based on parameter synchronous_node_count and adjusts the state in DCS & synchronous_standby_names as members join and leave.
This functionality can be further extended to support Priority (FIRST n) based synchronous replication & Quorum (ANY n) based synchronous replication in future.
The only python-etcd3 client working directly via gRPC still supports only a single endpoint, which is not very nice for high-availability.
Since Patroni is already using a heavily hacked version of python-etcd with smart retries and auto-discovery out-of-the-box, I decided to enhance the existing code with limited support of v3 protocol via gRPC-gateway.
Unfortunately, watches via gRPC-gateway requires us to open and keep the second connection to the etcd.
Known limitations:
* The very minimal supported version is 3.0.4. On earlier versions transactions don't work due to bugs in grpc-gateway. Without transactions we can't do atomic operations, i.e. leader locks.
* Watches work only starting from 3.1.0
* Authentication works only starting from 3.3.0
* gRPC-gateway does not support authentication using TLS Common Name. This is because gRPC-proxy terminates TLS from its client so all the clients share a cert of the proxy: https://github.com/etcd-io/etcd/blob/master/Documentation/op-guide/authentication.md#using-tls-common-name
So far Patroni was parsing `recovery.conf` or querying `pg_settings` in order to get the current values of recovery parameters. On PostgreSQL earlier than 12 it could easily happen that the value of `primary_conninfo` in the `recovery.conf` has nothing to do with reality. Luckily for us, on PostgreSQL 9.6+ there is a `pg_stat_wal_receiver` view, which contains current values of `primary_conninfo` and `primary_slot_name`. The password field is masked through, but this is fine, because authentication happens only during opening the connection. All other parameters we compare as usual.
Another advantage of `pg_stat_wal_recevier` - it contains the current timeline, therefore on 9.6+ we don't need to use the replication connection trick if walreceiver process is alive.
If there is no walreceiver process available or it is not streaming we will stick to old methods.
when Patroni is trying to figure out the necessity of pg_rewind it could write the content history file from the primary into the log. The history file is growing with every failover/switchover and eventually starts taking too many lines in the log, most of them are not so much useful.
Instead of showing the raw data, we will show only 3 lines before the current replica timeline and 2 lines after.
