mirror of
https://github.com/outbackdingo/mt76.git
synced 2026-10-24 13:26:48 +00:00
If we are associated and scanning is performed, sw_scan_complete callback
is done after we get back to operating channel, so we do not perform
queue cal work. Fix this queue cal work from sw_scan_complete().
On mt76x0 we have to restore gain in MT_BBP(AGC, 8) register after
scanning, as it was multiple times modified by channel switch code.
So queue cal work without any delay to set AGC gain value.
Similar like in mt76x2 init AGC gain only when set operating channel
and just check before queuing cal work in sw_scan_complete() if
initialization was already done.
Fixes: bbd10586f0df ("mt76x0: phy: do not run calibration during channel switch")
Signed-off-by: Stanislaw Gruszka <[email protected]>
260 lines
6.5 KiB
C
260 lines
6.5 KiB
C
/*
|
|
* Copyright (C) 2016 Felix Fietkau <[email protected]>
|
|
* Copyright (C) 2018 Lorenzo Bianconi <[email protected]>
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include "mt76x02.h"
|
|
#include "mt76x02_phy.h"
|
|
|
|
void mt76x02_phy_set_rxpath(struct mt76x02_dev *dev)
|
|
{
|
|
u32 val;
|
|
|
|
val = mt76_rr(dev, MT_BBP(AGC, 0));
|
|
val &= ~BIT(4);
|
|
|
|
switch (dev->mt76.chainmask & 0xf) {
|
|
case 2:
|
|
val |= BIT(3);
|
|
break;
|
|
default:
|
|
val &= ~BIT(3);
|
|
break;
|
|
}
|
|
|
|
mt76_wr(dev, MT_BBP(AGC, 0), val);
|
|
mb();
|
|
val = mt76_rr(dev, MT_BBP(AGC, 0));
|
|
}
|
|
EXPORT_SYMBOL_GPL(mt76x02_phy_set_rxpath);
|
|
|
|
void mt76x02_phy_set_txdac(struct mt76x02_dev *dev)
|
|
{
|
|
int txpath;
|
|
|
|
txpath = (dev->mt76.chainmask >> 8) & 0xf;
|
|
switch (txpath) {
|
|
case 2:
|
|
mt76_set(dev, MT_BBP(TXBE, 5), 0x3);
|
|
break;
|
|
default:
|
|
mt76_clear(dev, MT_BBP(TXBE, 5), 0x3);
|
|
break;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(mt76x02_phy_set_txdac);
|
|
|
|
static u32
|
|
mt76x02_tx_power_mask(u8 v1, u8 v2, u8 v3, u8 v4)
|
|
{
|
|
u32 val = 0;
|
|
|
|
val |= (v1 & (BIT(6) - 1)) << 0;
|
|
val |= (v2 & (BIT(6) - 1)) << 8;
|
|
val |= (v3 & (BIT(6) - 1)) << 16;
|
|
val |= (v4 & (BIT(6) - 1)) << 24;
|
|
return val;
|
|
}
|
|
|
|
int mt76x02_get_max_rate_power(struct mt76_rate_power *r)
|
|
{
|
|
s8 ret = 0;
|
|
int i;
|
|
|
|
for (i = 0; i < sizeof(r->all); i++)
|
|
ret = max(ret, r->all[i]);
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mt76x02_get_max_rate_power);
|
|
|
|
void mt76x02_limit_rate_power(struct mt76_rate_power *r, int limit)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < sizeof(r->all); i++)
|
|
if (r->all[i] > limit)
|
|
r->all[i] = limit;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mt76x02_limit_rate_power);
|
|
|
|
void mt76x02_add_rate_power_offset(struct mt76_rate_power *r, int offset)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < sizeof(r->all); i++)
|
|
r->all[i] += offset;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mt76x02_add_rate_power_offset);
|
|
|
|
void mt76x02_phy_set_txpower(struct mt76x02_dev *dev, int txp_0, int txp_1)
|
|
{
|
|
struct mt76_rate_power *t = &dev->mt76.rate_power;
|
|
|
|
mt76_rmw_field(dev, MT_TX_ALC_CFG_0, MT_TX_ALC_CFG_0_CH_INIT_0, txp_0);
|
|
mt76_rmw_field(dev, MT_TX_ALC_CFG_0, MT_TX_ALC_CFG_0_CH_INIT_1, txp_1);
|
|
|
|
mt76_wr(dev, MT_TX_PWR_CFG_0,
|
|
mt76x02_tx_power_mask(t->cck[0], t->cck[2], t->ofdm[0],
|
|
t->ofdm[2]));
|
|
mt76_wr(dev, MT_TX_PWR_CFG_1,
|
|
mt76x02_tx_power_mask(t->ofdm[4], t->ofdm[6], t->ht[0],
|
|
t->ht[2]));
|
|
mt76_wr(dev, MT_TX_PWR_CFG_2,
|
|
mt76x02_tx_power_mask(t->ht[4], t->ht[6], t->ht[8],
|
|
t->ht[10]));
|
|
mt76_wr(dev, MT_TX_PWR_CFG_3,
|
|
mt76x02_tx_power_mask(t->ht[12], t->ht[14], t->stbc[0],
|
|
t->stbc[2]));
|
|
mt76_wr(dev, MT_TX_PWR_CFG_4,
|
|
mt76x02_tx_power_mask(t->stbc[4], t->stbc[6], 0, 0));
|
|
mt76_wr(dev, MT_TX_PWR_CFG_7,
|
|
mt76x02_tx_power_mask(t->ofdm[7], t->vht[8], t->ht[7],
|
|
t->vht[9]));
|
|
mt76_wr(dev, MT_TX_PWR_CFG_8,
|
|
mt76x02_tx_power_mask(t->ht[14], 0, t->vht[8], t->vht[9]));
|
|
mt76_wr(dev, MT_TX_PWR_CFG_9,
|
|
mt76x02_tx_power_mask(t->ht[7], 0, t->stbc[8], t->stbc[9]));
|
|
}
|
|
EXPORT_SYMBOL_GPL(mt76x02_phy_set_txpower);
|
|
|
|
int mt76x02_phy_get_min_avg_rssi(struct mt76x02_dev *dev)
|
|
{
|
|
struct mt76x02_sta *sta;
|
|
struct mt76_wcid *wcid;
|
|
int i, j, min_rssi = 0;
|
|
s8 cur_rssi;
|
|
|
|
local_bh_disable();
|
|
rcu_read_lock();
|
|
|
|
for (i = 0; i < ARRAY_SIZE(dev->mt76.wcid_mask); i++) {
|
|
unsigned long mask = dev->mt76.wcid_mask[i];
|
|
|
|
if (!mask)
|
|
continue;
|
|
|
|
for (j = i * BITS_PER_LONG; mask; j++, mask >>= 1) {
|
|
if (!(mask & 1))
|
|
continue;
|
|
|
|
wcid = rcu_dereference(dev->mt76.wcid[j]);
|
|
if (!wcid)
|
|
continue;
|
|
|
|
sta = container_of(wcid, struct mt76x02_sta, wcid);
|
|
spin_lock(&dev->mt76.rx_lock);
|
|
if (sta->inactive_count++ < 5)
|
|
cur_rssi = ewma_signal_read(&sta->rssi);
|
|
else
|
|
cur_rssi = 0;
|
|
spin_unlock(&dev->mt76.rx_lock);
|
|
|
|
if (cur_rssi < min_rssi)
|
|
min_rssi = cur_rssi;
|
|
}
|
|
}
|
|
|
|
rcu_read_unlock();
|
|
local_bh_enable();
|
|
|
|
if (!min_rssi)
|
|
return -75;
|
|
|
|
return min_rssi;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mt76x02_phy_get_min_avg_rssi);
|
|
|
|
void mt76x02_phy_set_bw(struct mt76x02_dev *dev, int width, u8 ctrl)
|
|
{
|
|
int core_val, agc_val;
|
|
|
|
switch (width) {
|
|
case NL80211_CHAN_WIDTH_80:
|
|
core_val = 3;
|
|
agc_val = 7;
|
|
break;
|
|
case NL80211_CHAN_WIDTH_40:
|
|
core_val = 2;
|
|
agc_val = 3;
|
|
break;
|
|
default:
|
|
core_val = 0;
|
|
agc_val = 1;
|
|
break;
|
|
}
|
|
|
|
mt76_rmw_field(dev, MT_BBP(CORE, 1), MT_BBP_CORE_R1_BW, core_val);
|
|
mt76_rmw_field(dev, MT_BBP(AGC, 0), MT_BBP_AGC_R0_BW, agc_val);
|
|
mt76_rmw_field(dev, MT_BBP(AGC, 0), MT_BBP_AGC_R0_CTRL_CHAN, ctrl);
|
|
mt76_rmw_field(dev, MT_BBP(TXBE, 0), MT_BBP_TXBE_R0_CTRL_CHAN, ctrl);
|
|
}
|
|
EXPORT_SYMBOL_GPL(mt76x02_phy_set_bw);
|
|
|
|
void mt76x02_phy_set_band(struct mt76x02_dev *dev, int band,
|
|
bool primary_upper)
|
|
{
|
|
switch (band) {
|
|
case NL80211_BAND_2GHZ:
|
|
mt76_set(dev, MT_TX_BAND_CFG, MT_TX_BAND_CFG_2G);
|
|
mt76_clear(dev, MT_TX_BAND_CFG, MT_TX_BAND_CFG_5G);
|
|
break;
|
|
case NL80211_BAND_5GHZ:
|
|
mt76_clear(dev, MT_TX_BAND_CFG, MT_TX_BAND_CFG_2G);
|
|
mt76_set(dev, MT_TX_BAND_CFG, MT_TX_BAND_CFG_5G);
|
|
break;
|
|
}
|
|
|
|
mt76_rmw_field(dev, MT_TX_BAND_CFG, MT_TX_BAND_CFG_UPPER_40M,
|
|
primary_upper);
|
|
}
|
|
EXPORT_SYMBOL_GPL(mt76x02_phy_set_band);
|
|
|
|
bool mt76x02_phy_adjust_vga_gain(struct mt76x02_dev *dev)
|
|
{
|
|
u8 limit = dev->cal.low_gain > 0 ? 16 : 4;
|
|
bool ret = false;
|
|
u32 false_cca;
|
|
|
|
false_cca = FIELD_GET(MT_RX_STAT_1_CCA_ERRORS, mt76_rr(dev, MT_RX_STAT_1));
|
|
dev->cal.false_cca = false_cca;
|
|
if (false_cca > 800 && dev->cal.agc_gain_adjust < limit) {
|
|
dev->cal.agc_gain_adjust += 2;
|
|
ret = true;
|
|
} else if ((false_cca < 10 && dev->cal.agc_gain_adjust > 0) ||
|
|
(dev->cal.agc_gain_adjust >= limit && false_cca < 500)) {
|
|
dev->cal.agc_gain_adjust -= 2;
|
|
ret = true;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mt76x02_phy_adjust_vga_gain);
|
|
|
|
void mt76x02_init_agc_gain(struct mt76x02_dev *dev)
|
|
{
|
|
dev->cal.agc_gain_init[0] = mt76_get_field(dev, MT_BBP(AGC, 8),
|
|
MT_BBP_AGC_GAIN);
|
|
dev->cal.agc_gain_init[1] = mt76_get_field(dev, MT_BBP(AGC, 9),
|
|
MT_BBP_AGC_GAIN);
|
|
memcpy(dev->cal.agc_gain_cur, dev->cal.agc_gain_init,
|
|
sizeof(dev->cal.agc_gain_cur));
|
|
dev->cal.low_gain = -1;
|
|
dev->cal.gain_init_done = true;
|
|
}
|
|
EXPORT_SYMBOL_GPL(mt76x02_init_agc_gain);
|