Felix Fietkau 705a0fcdc3 mt76: mt7615: add multiple wiphy support to the dfs support code ...

There are two DFS detectors on the chip. When using 160 MHz channel bandwidth
(not supported in dual-wiphy mode), both are used. Otherwise, one detector is
used per wiphy.
Rework the code to start/stop them separately per phy and to indicate the
radar event on the right phy based on the detector index

Signed-off-by: Felix Fietkau <[email protected]>

2019-12-03 20:04:12 +01:00

..

debugfs.c

mt76: mt7615: add multiple wiphy support for smart carrier sense

2019-12-03 20:04:12 +01:00

dma.c

mt76: mt7615: track tx/rx airtime for airtime fairness

2019-09-26 18:34:32 +02:00

eeprom.c

mt76: move txpower and antenna mask to struct mt76_phy

2019-11-20 12:58:37 +01:00

eeprom.h

mt76: mt7615: read {tx,rx} mask from eeprom

2019-11-20 12:27:21 +01:00

init.c

mt76: mt7615: add multiple wiphy support to the dfs support code

2019-12-03 20:04:12 +01:00

Kconfig

mt76: add mac80211 driver for MT7615 PCIe-based chipsets

2019-04-25 12:04:34 +02:00

mac.c

mt76: mt7615: add multiple wiphy support to the dfs support code

2019-12-03 20:04:12 +01:00

mac.h

mt76: mt7615: introduce mt7615_txwi_to_txp utility routine

2019-09-05 17:51:19 +02:00

main.c

mt76: mt7615: add multiple wiphy support to the dfs support code

2019-12-03 20:04:12 +01:00

Makefile

mt76: mt7615: add radar pattern test knob to debugfs

2019-07-01 14:09:17 +02:00

mcu.c

mt76: mt7615: add multiple wiphy support to the dfs support code

2019-12-03 20:04:12 +01:00

mcu.h

mt76: mt7615: add multiple wiphy support to the dfs support code

2019-12-03 20:04:12 +01:00

mt7615.h

mt76: mt7615: add multiple wiphy support to the dfs support code

2019-12-03 20:04:12 +01:00

pci.c

mt76: move state from struct mt76_dev to mt76_phy

2019-11-20 12:54:55 +01:00

regs.h

mt76: mt7615: add missing register init for dual-wiphy support

2019-12-03 20:04:12 +01:00