Lorenzo BianconiandFelix Fietkau 6da464231a mt76x0: run vco calibration for each channel configuration ...

According to vendor sdk, vco calibration has to be executed
for each channel configuration whereas mcu calibration has to be
performed during channel scanning. This patch fixes the mt76x0
monitor mode issue since in that configuration vco calibration
was never executed

Fixes: 10de7a8b4ab9 ("mt76x0: phy files")
Tested-by: Sid Hayn <[email protected]>
Signed-off-by: Lorenzo Bianconi <[email protected]>

2018-09-12 13:16:24 +02:00

..

debugfs.c

mt76x0: trace and debugfs files

2018-09-11 13:49:19 +02:00

dma.h

mt76x0: dma and tx files

2018-09-11 13:49:19 +02:00

eeprom.c

mt76x0: inital split between pci and usb

2018-09-12 13:16:24 +02:00

eeprom.h

mt76x0: remove has_{2,5}ghz fields of mt76x0_eeprom_params

2018-09-12 13:16:24 +02:00

init.c

mt76x0: make device allocation bus neutral

2018-09-12 13:16:24 +02:00

initvals_phy.h

mt76x0: phy files

2018-09-11 13:49:19 +02:00

initvals.h

mt76x0: init files

2018-09-11 13:49:19 +02:00

mac.c

mt76x0: trim rx skb to proper length

2018-09-12 13:16:24 +02:00

mac.h

mt76x0: simplify mt76_mac_process_rx signature

2018-09-12 13:16:24 +02:00

main.c

mt76x0: inital split between pci and usb

2018-09-12 13:16:24 +02:00

Makefile

mt76x0: inital split between pci and usb

2018-09-12 13:16:24 +02:00

mcu.c

mt76x0: do not free/alloc buffers during suspend/resume

2018-09-12 13:16:24 +02:00

mcu.h

mt76x0: use mt76u_mcu_send_msg utility routine to send fw cmds

2018-09-11 13:49:19 +02:00

mt76x0.h

mt76x0: make device allocation bus neutral

2018-09-12 13:16:24 +02:00

pci.c

mt76x0: make device allocation bus neutral

2018-09-12 13:16:24 +02:00

phy.c

mt76x0: run vco calibration for each channel configuration

2018-09-12 13:16:24 +02:00

phy.h

mt76x0: phy files

2018-09-11 13:49:19 +02:00

trace.c

mt76x0: trace and debugfs files

2018-09-11 13:49:19 +02:00

trace.h

mt76: unify txwi and rxwi structures

2018-09-11 13:49:19 +02:00

tx.c

mt76x0: make device allocation bus neutral

2018-09-12 13:16:24 +02:00

usb.c

mt76x0: make device allocation bus neutral

2018-09-12 13:16:24 +02:00

usb.h

mt76x0: remove unused routines for usb_buff alloc/free

2018-09-11 13:49:19 +02:00