mirror of
https://github.com/outbackdingo/mt76.git
synced 2026-10-24 21:36:52 +00:00
We don't have to create a separate sdio.xmit_buf buffer for each queue. Instead, we just need to create one, reuse it across all queues to reduce memory consumption further. And then we should take it into account the actual the host and the device MMC capability to determine what the appropriate xmit_buf_size can be. Both MT7921S and MT7663 can support up to Tx FIFO size of 0x3fe00 which means the device can receive 511 blocks of block size 512 in a row from the host. So if the driver aggregates the frames as many as possible the the device can support, we can merge multiple MMC requests into a single one to get rid of the overhead of the handling and synchronizing in those unnecessary MMC requests and reduce the SDIO lock contention with the Bluetooth concurrent traffic and finally to have the higher bus utilization with less idle cycle. With the patch, it is helpful for WiFi to have steady throughput performance especially while running Bluetooth concurrently. Co-developed-by: Deren Wu <[email protected]> Signed-off-by: Deren Wu <[email protected]> Signed-off-by: Sean Wang <[email protected]> Acked-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
322 lines
7.5 KiB
C
322 lines
7.5 KiB
C
// SPDX-License-Identifier: ISC
|
|
/* Copyright (C) 2021 MediaTek Inc.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/sdio_ids.h>
|
|
#include <linux/mmc/sdio_func.h>
|
|
|
|
#include "mt7921.h"
|
|
#include "../sdio.h"
|
|
#include "mac.h"
|
|
#include "mcu.h"
|
|
|
|
static const struct sdio_device_id mt7921s_table[] = {
|
|
{ SDIO_DEVICE(SDIO_VENDOR_ID_MEDIATEK, 0x7901) },
|
|
{ } /* Terminating entry */
|
|
};
|
|
|
|
static void mt7921s_txrx_worker(struct mt76_worker *w)
|
|
{
|
|
struct mt76_sdio *sdio = container_of(w, struct mt76_sdio,
|
|
txrx_worker);
|
|
struct mt76_dev *mdev = container_of(sdio, struct mt76_dev, sdio);
|
|
struct mt7921_dev *dev = container_of(mdev, struct mt7921_dev, mt76);
|
|
|
|
if (!mt76_connac_pm_ref(&dev->mphy, &dev->pm)) {
|
|
queue_work(mdev->wq, &dev->pm.wake_work);
|
|
return;
|
|
}
|
|
|
|
mt76s_txrx_worker(sdio);
|
|
mt76_connac_pm_unref(&dev->mphy, &dev->pm);
|
|
}
|
|
|
|
static void mt7921s_unregister_device(struct mt7921_dev *dev)
|
|
{
|
|
struct mt76_connac_pm *pm = &dev->pm;
|
|
|
|
mt76_unregister_device(&dev->mt76);
|
|
cancel_delayed_work_sync(&pm->ps_work);
|
|
cancel_work_sync(&pm->wake_work);
|
|
|
|
mt76s_deinit(&dev->mt76);
|
|
mt7921s_wfsys_reset(dev);
|
|
mt7921_mcu_exit(dev);
|
|
|
|
mt76_free_device(&dev->mt76);
|
|
}
|
|
|
|
static int mt7921s_parse_intr(struct mt76_dev *dev, struct mt76s_intr *intr)
|
|
{
|
|
struct mt76_sdio *sdio = &dev->sdio;
|
|
struct mt7921_sdio_intr *irq_data = sdio->intr_data;
|
|
int i, err;
|
|
|
|
sdio_claim_host(sdio->func);
|
|
err = sdio_readsb(sdio->func, irq_data, MCR_WHISR, sizeof(*irq_data));
|
|
sdio_release_host(sdio->func);
|
|
|
|
if (err < 0)
|
|
return err;
|
|
|
|
if (irq_data->rx.num[0] > 16 ||
|
|
irq_data->rx.num[1] > 128)
|
|
return -EINVAL;
|
|
|
|
intr->isr = irq_data->isr;
|
|
intr->rec_mb = irq_data->rec_mb;
|
|
intr->tx.wtqcr = irq_data->tx.wtqcr;
|
|
intr->rx.num = irq_data->rx.num;
|
|
for (i = 0; i < 2 ; i++) {
|
|
if (!i)
|
|
intr->rx.len[0] = irq_data->rx.len0;
|
|
else
|
|
intr->rx.len[1] = irq_data->rx.len1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mt7921s_probe(struct sdio_func *func,
|
|
const struct sdio_device_id *id)
|
|
{
|
|
static const struct mt76_driver_ops drv_ops = {
|
|
.txwi_size = MT_SDIO_TXD_SIZE,
|
|
.survey_flags = SURVEY_INFO_TIME_TX |
|
|
SURVEY_INFO_TIME_RX |
|
|
SURVEY_INFO_TIME_BSS_RX,
|
|
.tx_prepare_skb = mt7921s_tx_prepare_skb,
|
|
.tx_complete_skb = mt7921s_tx_complete_skb,
|
|
.tx_status_data = mt7921s_tx_status_data,
|
|
.rx_skb = mt7921_queue_rx_skb,
|
|
.sta_ps = mt7921_sta_ps,
|
|
.sta_add = mt7921_mac_sta_add,
|
|
.sta_assoc = mt7921_mac_sta_assoc,
|
|
.sta_remove = mt7921_mac_sta_remove,
|
|
.update_survey = mt7921_update_channel,
|
|
};
|
|
static const struct mt76_bus_ops mt7921s_ops = {
|
|
.rr = mt76s_rr,
|
|
.rmw = mt76s_rmw,
|
|
.wr = mt76s_wr,
|
|
.write_copy = mt76s_write_copy,
|
|
.read_copy = mt76s_read_copy,
|
|
.wr_rp = mt76s_wr_rp,
|
|
.rd_rp = mt76s_rd_rp,
|
|
.type = MT76_BUS_SDIO,
|
|
};
|
|
static const struct mt7921_hif_ops mt7921_sdio_ops = {
|
|
.init_reset = mt7921s_init_reset,
|
|
.reset = mt7921s_mac_reset,
|
|
.mcu_init = mt7921s_mcu_init,
|
|
.drv_own = mt7921s_mcu_drv_pmctrl,
|
|
.fw_own = mt7921s_mcu_fw_pmctrl,
|
|
};
|
|
|
|
struct mt7921_dev *dev;
|
|
struct mt76_dev *mdev;
|
|
int ret;
|
|
|
|
mdev = mt76_alloc_device(&func->dev, sizeof(*dev), &mt7921_ops,
|
|
&drv_ops);
|
|
if (!mdev)
|
|
return -ENOMEM;
|
|
|
|
dev = container_of(mdev, struct mt7921_dev, mt76);
|
|
dev->hif_ops = &mt7921_sdio_ops;
|
|
|
|
sdio_set_drvdata(func, dev);
|
|
|
|
ret = mt76s_init(mdev, func, &mt7921s_ops);
|
|
if (ret < 0)
|
|
goto error;
|
|
|
|
ret = mt76s_hw_init(mdev, func, MT76_CONNAC2_SDIO);
|
|
if (ret)
|
|
goto error;
|
|
|
|
mdev->rev = (mt76_rr(dev, MT_HW_CHIPID) << 16) |
|
|
(mt76_rr(dev, MT_HW_REV) & 0xff);
|
|
dev_dbg(mdev->dev, "ASIC revision: %04x\n", mdev->rev);
|
|
|
|
mdev->sdio.parse_irq = mt7921s_parse_intr;
|
|
mdev->sdio.intr_data = devm_kmalloc(mdev->dev,
|
|
sizeof(struct mt7921_sdio_intr),
|
|
GFP_KERNEL);
|
|
if (!mdev->sdio.intr_data) {
|
|
ret = -ENOMEM;
|
|
goto error;
|
|
}
|
|
|
|
ret = mt76s_alloc_rx_queue(mdev, MT_RXQ_MAIN);
|
|
if (ret)
|
|
goto error;
|
|
|
|
ret = mt76s_alloc_rx_queue(mdev, MT_RXQ_MCU);
|
|
if (ret)
|
|
goto error;
|
|
|
|
ret = mt76s_alloc_tx(mdev);
|
|
if (ret)
|
|
goto error;
|
|
|
|
ret = mt76_worker_setup(mt76_hw(dev), &mdev->sdio.txrx_worker,
|
|
mt7921s_txrx_worker, "sdio-txrx");
|
|
if (ret)
|
|
goto error;
|
|
|
|
sched_set_fifo_low(mdev->sdio.txrx_worker.task);
|
|
|
|
ret = mt7921_register_device(dev);
|
|
if (ret)
|
|
goto error;
|
|
|
|
return 0;
|
|
|
|
error:
|
|
mt76s_deinit(&dev->mt76);
|
|
mt76_free_device(&dev->mt76);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void mt7921s_remove(struct sdio_func *func)
|
|
{
|
|
struct mt7921_dev *dev = sdio_get_drvdata(func);
|
|
|
|
mt7921s_unregister_device(dev);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int mt7921s_suspend(struct device *__dev)
|
|
{
|
|
struct sdio_func *func = dev_to_sdio_func(__dev);
|
|
struct mt7921_dev *dev = sdio_get_drvdata(func);
|
|
struct mt76_connac_pm *pm = &dev->pm;
|
|
struct mt76_dev *mdev = &dev->mt76;
|
|
int err;
|
|
|
|
pm->suspended = true;
|
|
set_bit(MT76_STATE_SUSPEND, &mdev->phy.state);
|
|
|
|
cancel_delayed_work_sync(&pm->ps_work);
|
|
cancel_work_sync(&pm->wake_work);
|
|
|
|
err = mt7921_mcu_drv_pmctrl(dev);
|
|
if (err < 0)
|
|
goto restore_suspend;
|
|
|
|
/* always enable deep sleep during suspend to reduce
|
|
* power consumption
|
|
*/
|
|
mt76_connac_mcu_set_deep_sleep(mdev, true);
|
|
|
|
mt76_txq_schedule_all(&dev->mphy);
|
|
mt76_worker_disable(&mdev->tx_worker);
|
|
mt76_worker_disable(&mdev->sdio.status_worker);
|
|
cancel_work_sync(&mdev->sdio.stat_work);
|
|
clear_bit(MT76_READING_STATS, &dev->mphy.state);
|
|
mt76_tx_status_check(mdev, true);
|
|
|
|
mt76_worker_schedule(&mdev->sdio.txrx_worker);
|
|
wait_event_timeout(dev->mt76.sdio.wait,
|
|
mt76s_txqs_empty(&dev->mt76), 5 * HZ);
|
|
|
|
/* It is supposed that SDIO bus is idle at the point */
|
|
err = mt76_connac_mcu_set_hif_suspend(mdev, true);
|
|
if (err)
|
|
goto restore_worker;
|
|
|
|
mt76_worker_disable(&mdev->sdio.txrx_worker);
|
|
mt76_worker_disable(&mdev->sdio.net_worker);
|
|
|
|
err = mt7921_mcu_fw_pmctrl(dev);
|
|
if (err)
|
|
goto restore_txrx_worker;
|
|
|
|
sdio_set_host_pm_flags(func, MMC_PM_KEEP_POWER);
|
|
|
|
return 0;
|
|
|
|
restore_txrx_worker:
|
|
mt76_worker_enable(&mdev->sdio.net_worker);
|
|
mt76_worker_enable(&mdev->sdio.txrx_worker);
|
|
mt76_connac_mcu_set_hif_suspend(mdev, false);
|
|
|
|
restore_worker:
|
|
mt76_worker_enable(&mdev->tx_worker);
|
|
mt76_worker_enable(&mdev->sdio.status_worker);
|
|
|
|
if (!pm->ds_enable)
|
|
mt76_connac_mcu_set_deep_sleep(mdev, false);
|
|
|
|
restore_suspend:
|
|
clear_bit(MT76_STATE_SUSPEND, &mdev->phy.state);
|
|
pm->suspended = false;
|
|
|
|
return err;
|
|
}
|
|
|
|
static int mt7921s_resume(struct device *__dev)
|
|
{
|
|
struct sdio_func *func = dev_to_sdio_func(__dev);
|
|
struct mt7921_dev *dev = sdio_get_drvdata(func);
|
|
struct mt76_connac_pm *pm = &dev->pm;
|
|
struct mt76_dev *mdev = &dev->mt76;
|
|
int err;
|
|
|
|
clear_bit(MT76_STATE_SUSPEND, &mdev->phy.state);
|
|
|
|
err = mt7921_mcu_drv_pmctrl(dev);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
mt76_worker_enable(&mdev->tx_worker);
|
|
mt76_worker_enable(&mdev->sdio.txrx_worker);
|
|
mt76_worker_enable(&mdev->sdio.status_worker);
|
|
mt76_worker_enable(&mdev->sdio.net_worker);
|
|
|
|
/* restore previous ds setting */
|
|
if (!pm->ds_enable)
|
|
mt76_connac_mcu_set_deep_sleep(mdev, false);
|
|
|
|
err = mt76_connac_mcu_set_hif_suspend(mdev, false);
|
|
if (err)
|
|
return err;
|
|
|
|
pm->suspended = false;
|
|
|
|
return err;
|
|
}
|
|
|
|
static const struct dev_pm_ops mt7921s_pm_ops = {
|
|
.suspend = mt7921s_suspend,
|
|
.resume = mt7921s_resume,
|
|
};
|
|
#endif
|
|
|
|
MODULE_DEVICE_TABLE(sdio, mt7921s_table);
|
|
MODULE_FIRMWARE(MT7921_FIRMWARE_WM);
|
|
MODULE_FIRMWARE(MT7921_ROM_PATCH);
|
|
|
|
static struct sdio_driver mt7921s_driver = {
|
|
.name = KBUILD_MODNAME,
|
|
.probe = mt7921s_probe,
|
|
.remove = mt7921s_remove,
|
|
.id_table = mt7921s_table,
|
|
#ifdef CONFIG_PM
|
|
.drv = {
|
|
.pm = &mt7921s_pm_ops,
|
|
}
|
|
#endif
|
|
};
|
|
module_sdio_driver(mt7921s_driver);
|
|
MODULE_AUTHOR("Sean Wang <[email protected]>");
|
|
MODULE_LICENSE("Dual BSD/GPL");
|