Ryder LeeandFelix Fietkau 15e1c29ed8 mt76: mt7615: add missing settings for simultaneous dual-band support ...

MT7615 supports dual-wiphy which means that it can run on 2.4G and 5GHz
channels simultaneously, and driver should configure each band.

Add missing register settings, and refine band related definitions to
avoid duplicate codes.

Signed-off-by: Ryder Lee <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>

2019-12-27 15:15:07 +01:00

..

debugfs.c

mt76: mt7615: defer mcu initialization via workqueue

2019-12-05 11:36:53 +01:00

dma.c

mt76: mt7615: track tx/rx airtime for airtime fairness

2019-09-26 18:34:32 +02:00

eeprom.c

mt76: mt7615: add support for registering a second wiphy via debugfs

2019-12-03 20:04:12 +01:00

eeprom.h

mt76: mt7615: read {tx,rx} mask from eeprom

2019-11-20 12:27:21 +01:00

init.c

mt76: mt7615: add missing settings for simultaneous dual-band support

2019-12-27 15:15:07 +01:00

Kconfig

mt76: add mac80211 driver for MT7615 PCIe-based chipsets

2019-04-25 12:04:34 +02:00

mac.c

mt76: mt7615: add missing settings for simultaneous dual-band support

2019-12-27 15:15:07 +01:00

mac.h

mt76: mt7615: select the correct tx queue for frames sent to the second phy

2019-12-03 20:04:12 +01:00

main.c

mt76: mt7615: measure channel noise and report it via survey

2019-12-15 15:39:43 +01:00

Makefile

mt76: mt7615: add radar pattern test knob to debugfs

2019-07-01 14:09:17 +02:00

mcu.c

mt76: mt7615: increase MCU command timeout

2019-12-19 13:41:25 +01:00

mcu.h

mt76: mt7615: initialize dbdc settings on interface add

2019-12-03 20:04:12 +01:00

mt7615.h

mt76: mt7615: fix MT7615_CFEND_RATE_DEFAULT value

2019-12-22 15:17:43 +01:00

pci.c

mt7615: replace sta_state callback with sta_add/sta_remove

2019-12-05 14:26:14 +01:00

regs.h

mt76: mt7615: add missing settings for simultaneous dual-band support

2019-12-27 15:15:07 +01:00