This patch adds support for handling BSS_CHANGED_ERP_CTS_PROT and
BSS_CHANGED_HT.
With this change, when the Wi-Fi driver needs to adjust its behavior for
compatibility or performance, especially concerning older 11g/n devices,
by enabling or disabling CTS protection frames, often for hidden SSIDs or
to manage legacy clients.
It also introduces debugfs options to manually control protection mode,
allowing users to select betweenno protection, RTS/CTS, and CTS-to-self.
Reviewed-by: Money Wang <[email protected]>
Signed-off-by: Ryder Lee <[email protected]>
Link: https://patch.msgid.link/942ddb5777d5c201930d6609e9ba877a6ba6714a.1768879119.git.ryder.lee@mediatek.com
Signed-off-by: Felix Fietkau <[email protected]>
Clear WCID pointer removing the sta link in mt7996_mac_sta_deinit_link
routine.
Fixes: dd82a9e02c054 ("wifi: mt76: mt7996: Rely on mt7996_sta_link in sta_add/sta_remove callbacks")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Switch to the secondary link if available in mt7996_mac_sta_remove_links
routine if the primary one is removed.
Moreover reset secondary link index for single link scenario.
Fixes: 85cd5534a3f2e ("wifi: mt76: mt7996: use correct link_id when filling TXD and TXP")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Reset WCID index in mt76_txq struct if primary link is removed in
mt7996_vif_link_remove routine.
Fixes: a3316d2fc669f ("wifi: mt76: mt7996: set vif default link_id adding/removing vif links")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Set WCID index in mt76_txq struct just for the primary link in
mt7996_vif_link_add routine.
Fixes: 69d54ce7491d0 ("wifi: mt76: mt7996: switch to single multi-radio wiphy")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
MT7992 and MT7990 support up to 19 interfaces per band and 32 in total.
Fixes: 8df63a4bbe3d ("wifi: mt76: mt7996: adjust interface num and wtbl size for mt7992")
Signed-off-by: Shayne Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Since some radar specifications maintained by the driver are incorrect
and are now also maintained by the firmware, offload the initialization
procedure to the firmware.
This fixes issues for radar detection rate testings.
Signed-off-by: StanleyYP Wang <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
After channel switch, some tags of BSSINFO (rfch) and STAREC (bfer,
rate_ctrl) commands should also be updated. Otherwise, a BSS might not be
able to transmit with its peer using correct bandwidth.
Co-developed-by: Shayne Chen <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Signed-off-by: StanleyYP Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
RDD_DET_MODE is a firmware command intended for testing and does not
pause TX after radar detection, so remove it from the normal flow;
instead, use the MAC_ENABLE_CTRL firmware command to resume TX after
the radar-triggered channel switch completes.
Fixes: 1529e335f93d ("wifi: mt76: mt7996: rework radar HWRDD idx")
Co-developed-by: Shayne Chen <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Signed-off-by: StanleyYP Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Currently, per-radio attributes are set on per-phy basis, i.e., all the
radios present in a wiphy will take attributes values sent from user. But
each radio in a wiphy can get different values from userspace based on
its requirement.
To extend support to set per-radio attributes, add support to get radio
index from userspace. Add an NL attribute - NL80211_ATTR_WIPHY_RADIO_INDEX,
to get user specified radio index for which attributes should be changed.
Pass this to individual drivers, so that the drivers can use this radio
index to change per-radio attributes when necessary. Currently, per-radio
attributes identified are:
NL80211_ATTR_WIPHY_TX_POWER_LEVEL
NL80211_ATTR_WIPHY_ANTENNA_TX
NL80211_ATTR_WIPHY_ANTENNA_RX
NL80211_ATTR_WIPHY_RETRY_SHORT
NL80211_ATTR_WIPHY_RETRY_LONG
NL80211_ATTR_WIPHY_FRAG_THRESHOLD
NL80211_ATTR_WIPHY_RTS_THRESHOLD
NL80211_ATTR_WIPHY_COVERAGE_CLASS
NL80211_ATTR_TXQ_LIMIT
NL80211_ATTR_TXQ_MEMORY_LIMIT
NL80211_ATTR_TXQ_QUANTUM
By default, the radio index is set to -1. This means the attribute should
be treated as a global configuration. If the user has not specified any
index, then the radio index passed to individual drivers would be -1. This
would indicate that the attribute applies to all radios in that wiphy.
Signed-off-by: Roopni Devanathan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
Grab the mt76 mutex running mt7996_mac_sta_rc_work() since it is
required by mt7996_mcu_add_rate_ctrl routine.
Fixes: 28d519d0d493a ("wifi: mt76: Move RCU section in mt7996_mcu_add_rate_ctrl_fixed()")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Move mt76_abort_scan routine out of mt76_reset_device() in order to
avoid a possible deadlock since mt76_reset_device routine is running
with mt76 mutex help and mt76_abort_scan_complete() can grab mt76 mutex
in some cases.
Fixes: b36d55610215a ("wifi: mt76: abort scan/roc on hw restart")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Tested-by: Ben Greear <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Move mt7996_update_beacons routine inside mt76 mutex critical section
in mt7996_mac_reset_work() in order to run mt7996_vif_conf_link() in
mt7996_mcu_add_beacon routine.
Fixes: f30906c55a400 ("wifi: mt76: mt7996: disable beacons when going offchannel")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Tested-by: Ben Greear <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Grab mt76 mutex in mt7996_mac_sta_event routine in order to rely on
mt76_dereference() utility macro.
Fixes: ecd72f9695e7e ("wifi: mt76: mt7996: Support MLO in mt7996_mac_sta_event()")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Tested-by: Ben Greear <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
This patch fixes the following key issues:
- Pass correct link BSS to mt7996_mcu_add_key(), and use HW beacon
protection mode for mt7990 chipset
- Do not do group key deletion for GTK and IGTK due to FW design, the
delete key command will delete all group keys of a link BSS
- For deleting BIGTK, FW adds a new flow, but the "sec->add" field
should be filled with "SET_KEY". Note that if BIGTK is not deleted, it
will cause beacon decryption issue when switching from an AP interface
to a station interface
Fixes: 0c45d52276fd ("wifi: mt76: mt7996: fix setting beacon protection keys")
Co-developed-by: Allen Ye <[email protected]>
Signed-off-by: Allen Ye <[email protected]>
Co-developed-by: Peter Chiu <[email protected]>
Signed-off-by: Peter Chiu <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Obtain the correct link ID and, if needed, switch to the corresponding
wcid before populating the TX descriptor and TX payload.
Rules for link id:
- For QoS data of MLD peers (excluding EAPOL), select the primary or
secondary wcid based on whether the TID is odd or even to meet FW/HW
requirements
- For other packets, use IEEE80211_TX_CTRL_MLO_LINK if specified
(such as multicast and broadcast packets)
Signed-off-by: Shayne Chen <[email protected]>
Acked-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
For an MLD peer, we only need to call the teardown command when removing
the last link, and there's no need to call mt7996_mcu_add_sta() for the
earlier links.
Fixes: c1d6dd5d03eb ("wifi: mt76: mt7996: Add mt7996_mcu_teardown_mld_sta rouine")
Signed-off-by: Shayne Chen <[email protected]>
Acked-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Fix several fields in mt7996_mcu_bss_basic_tlv() that were not obtained
from the correct link. Without this patch, the MLD station interface
does not function properly.
Fixes: 34a41bfbcb71 ("wifi: mt76: mt7996: prepare mt7996_mcu_add_dev/bss_info for MLO support")
Signed-off-by: Shayne Chen <[email protected]>
Acked-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Fix the ibf_timeout field for mt7996, mt7992 and mt7990 chipsets. For
the mt7992, this value shall be set as 0xff, while the others shall be
set as 0x18.
Fixes: ad4c9a8a9803 ("wifi: mt76: mt7996: add implicit beamforming support for mt7992")
Signed-off-by: Howard Hsu <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Since wiphy->available_antennas_tx now accumulates the chainmask of all
the radios of a wiphy, use phy->orig_antenna_mask to get the original
max nss for comparison.
Fixes: 69d54ce7491d ("wifi: mt76: mt7996: switch to single multi-radio wiphy")
Signed-off-by: StanleyYP Wang <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Introduce Airoha NPU support to MT7996 driver. NPU is used to enable
traffic forward offloading between the MT76 NIC and the Airoha ethernet one
available on the Airoha EN7581 SoC using Netfilter Flowtable APIs.
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Remove unnecessary link_id checks in mt7996_tx routine since if the link
identifier provided by mac80211 is unspecified the value will be
overwritten at the beginning on the function.
Fixes: f940c9b7aef6 ("wifi: mt76: mt7996: Set proper link destination address in mt7996_tx()")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
The mt7996 driver currently checks the MT_RXD3_NORMAL_FCS_ERR bit in
rxd1 whereas other Connac3-based drivers(mt7925) correctly check this
bit in rxd3.
Since the MT_RXD3_NORMAL_FCS_ERR bit is defined in the fourth RX
descriptor word (rxd3), update mt7996 to use the proper descriptor
field. This change aligns mt7996 with mt7925 and the rest of the
Connac3 family.
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Alok Tiwari <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://patch.msgid.link/[email protected]
MediaTek has asked to switch from the ISC license to BSD-3-Clause-Clear,
in order to improve clarity and the legal integrity of the code.
The BSD-3-Clause license includes the "no endorsement" clause, which is
important for protecting the reputation of the original authors and
contributors by preventing unauthorized use of their names for endorsement
purposes.
This clause is absent in the BSD-2-Clause license, which is more permissive
but lacks this specific protection.
This change also cleans up the license of some Kconfig/Makefile files,
which were accidentally marked as GPL.
The GPL 2.0 remains in use on mt76x0, as well as two source files in mt7615
for which the license situation still needs to be clarified.
Signed-off-by: Felix Fietkau <[email protected]>
If a link does not have an assigned channel yet, mt7996_vif_link returns
NULL. We still need to store the updated queue settings in that case, and
apply them later.
Move the location of the queue params to within struct mt7996_vif_link.
Fixes: c0df2f0caa8d ("wifi: mt76: mt7996: prepare mt7996_mcu_set_tx for MLO support")
Signed-off-by: Felix Fietkau <[email protected]>
mt76_eeprom_override has of_get_mac_address, which can return
-EPROBE_DEFER if the nvmem driver gets loaded after mt76 for some
reason.
Make sure this gets passed to probe so that nvmem mac overrides always
work.
Signed-off-by: Rosen Penev <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Enable VTA flag in txwi to enable HQD in SPL which is needed by
the PST. Without this patch, PST cannot get the correct delay of
TxD and lead to a large latency.
Signed-off-by: Peter Chiu <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Set MT_WF_RFCR_DROP_OTHER_UC by default and disable this flag in
mt7996_set_monitor only if monitor mode is enabled.
Without this patch, the MT_WF_RFCR_DROP_OTHER_UC would not be set so the
driver would receive lots of packets meant for other devices.
Signed-off-by: Peter Chiu <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
