mt7925_start_nan() called mt7925_nan_set_nmi_addr(), which makes NAN
start fail. The NMI address is not managed here, so drop the call.
Also track dev->nan_vif only in add/remove_interface and fold the
single BSS rollback into an inline error check.
Fixes: 0f3605e4f8de ("wifi: mt76: mt7925: wire up NAN operations")
Co-developed-by: Sean Wang <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Signed-off-by: Stella Liu <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
The NDP STA record role_idx must carry the NAN BSS band0 index
rather than the mac80211 BSS index, otherwise the firmware maps the
NDP peer to the wrong role. Use the fixed NAN_BSS_INDEX_BAND0 value.
While at it, drop the inline peer-schedule setup in
mt792x_nan_map_sta_rec(): the peer schedule is already driven by the
upper layer through the peer_sched_changed callback
(mt792x_nan_set_peer_schedule()), so the redundant call and the
now-unused local variables are removed.
Fixes: 0f3605e4f8de ("wifi: mt76: mt7925: wire up NAN operations")
Co-developed-by: Sean Wang <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Signed-off-by: Stella Liu <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
In the final version of 802.11be-2024, Transition Delay and Padding
Delay subfield are for both EMLSR and EMLMR. Depending if the mode is
EMLSR or EMLMR, the interpretation of the encoded value might change.
Define all the constants and helpers to interpret delay subfields both
in EMLSR and EMLMR mode.
Signed-off-by: Pablo Martin-Gomez <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
The action code actually serves to identify the type of action
frame, so it really isn't part of the per-type structure. Pull
it out and have it in the general action frame format.
In theory, whether or not the action code is present in this
way is up to each category, but all categories that are defined
right now all have that value.
While at it, and since this change requires changing all users,
remove the 'u' and make it an anonymous union in this case, so
that all code using this changes.
Change IEEE80211_MIN_ACTION_SIZE to take an argument which says
how much of the frame is needed, e.g. category, action_code or
the specific frame type that's defined in the union. Again this
also ensures that all code is updated.
In some cases, fix bugs where the SKB length was checked after
having accessed beyond the checked length, in particular in FTM
code, e.g. ieee80211_is_ftm().
Link: https://patch.msgid.link/20260226183607.67e71846b59e.I9a24328e3ffcaae179466a935f1c3345029f9961@changeid
Signed-off-by: Johannes Berg <[email protected]>
Per IEEE 802.11be, the Beamformee SS <= 80/160/320 MHz 3-bit subfields
in the EHT PHY Capabilities are encoded as (Nss - 1) and are required
to be >= 3 (i.e. at least 4 SS receive capability) whenever SU
Beamformee is advertised.
MT7925 is a 2x2 STA (sts = 2), so directly filling (sts - 1) = 1
violates the spec minimum. Clamp the encoded value to 3 when sts <= 3,
otherwise use (sts - 1). This is applied consistently to the
BEAMFORMEE_SS <= 80 MHz (split across phy_cap_info[0]/[1]), <= 160 MHz
and <= 320 MHz (6 GHz only) subfields.
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: shengwei.lu <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
The per-chain response-frame RSSI values are packed one per byte, but the
4th chain was extracted with GENMASK(31, 14) instead of GENMASK(31, 24).
The wrong mask overlaps chains 1-3 and shifts by 14, producing a garbage
chain-3 value that corrupts ack_signal/avg_ack_signal on 4x4 radios.
Extract the correct byte.
Fixes: a71b648e3527 ("wifi: mt76: mt7915: add ack signal support")
Fixes: ea5d99d07fbf ("wifi: mt76: mt7996: enable ack signal support")
Fixes: 67fc7a304bf5 ("wifi: mt76: mt7921: add ack signal support")
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Introduce regulatory wiphy self-managed mode support for MT7925,
allowing the driver to manage its own regulatory domain independently
from the kernel's regulatory framework.
Signed-off-by: Charlie-cy Wu <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
The mt7925_tx_power_limit_tlv struct begins with a 4-byte rsv[] field
that acts as a UNI command header prefix. The firmware dispatcher did
not use the 4-byte rsv[] and will only check the payloads after the
4-byte rsv[] As a result, the total message length minus the 4-byte
prefix. Fix this by setting len to msg_len - 4.
Fixes: ccb1863 ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Jared.Huang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Fix the power table update sequence to ensure CLC is loaded before
setting SAR power table.
The firmware requires CLC baseline to be established first
to properly calculate the final power limit as min(clc_limit, rate_limit,sar_limit).
Fixes: 9557b6fe0c8b ("wifi: mt76: mt7925: refine the txpower initialization flow")
Signed-off-by: Jared.Huang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
During reset recovery, mt7925_vif_connect_iter() replays firmware state
for links tracked in mvif->valid_links. After MLO link changes or MCU
timeout recovery, the driver bitmap can temporarily contain a link whose
mac80211 bss_conf has already gone away.
This can pass a NULL bss_conf to mt76_connac_mcu_uni_add_dev(), matching
the crash where x1, the second argument, is NULL:
pc : mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib]
lr : mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common]
x2 : ffffff80a77f6018 x1 : 0000000000000000 x0 : ffffff8099402080
Call trace:
mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib]
mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common]
mt7925_mac_reset_work+0x264/0x2f8 [mt7925_common]
Skip missing bss_conf entries before replaying the link. Non-MLO AP/STA
reset replay is unchanged because the helper still returns &vif->bss_conf
for the legacy link.
Fixes: 14061994184d ("wifi: mt76: mt7925: add link handling in mt7925_vif_connect_iter")
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Newer mt7925 firmware uses a shorter WoW pattern TLV with rsv[3]. Select
the v2 layout based on the firmware build date, while keeping the old
layout for older firmware.
This also makes the WoW pattern handling compatible with newer devices
such as MT7928.
Tested-by: Stella Liu <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Use the active channel context to select the SNIFFER command band index on
MT7927, and fall back to the PHY chandef when no channel context is
available.
Also pass the same band index to the sniffer channel configuration. This
keeps monitor setup on the correct band, especially when multiple PHY band
contexts are present.
Fixes: 35a5dcc71735 ("wifi: mt76: mt7925: add MT7927 PCIe support")
Signed-off-by: Sean Wang <[email protected]>
Tested-by: Devin Wittmayer <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
mt7925 queues mlo_pm_work with a 5 second delay during multi-link
power-save setup and never cancels it on the stop path. If the device is
torn down inside that window, the work outlives the teardown and its timer
fires afterwards, trying to queue onto the workqueue that is already gone:
workqueue: cannot queue mt7925_mlo_pm_work [mt7925_common] on wq phy0
WARNING: kernel/workqueue.c:2283 at __queue_work+0x59/0xa0, CPU#1: swapper/1/0
call_timer_fn+0x2a/0x140
__run_timers+0x203/0x330
run_timer_softirq+0x86/0xf0
mt7921 already has its own stop callback, so add one for mt7925 that
cancels the work before calling mt792x_stop(). mt7925_ops backs both the
PCIe and USB drivers, so this covers both.
Fixes: 276a56883257 ("wifi: mt76: mt7925: update the power-saving flow")
Cc: [email protected]
Tested-by: Traockl <[email protected]>
Signed-off-by: Devin Wittmayer <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
If the device is reset, suspended or unregistered within that window,
the pending work can still run and access vif/bss data that may already
be freed, or send MCU commands while the firmware is not available.
Add cancel_delayed_work_sync(&dev->mlo_pm_work) in all relevant teardown
and suspend paths:
- mt7925_mac_reset_work() (chip reset recovery)
- mt7925e_unregister_device() (PCIe unbind)
- mt7925_pci_suspend() (PCIe bus suspend)
- mt7925_suspend() (mac80211 suspend)
- mt7925u_suspend() (USB bus / runtime suspend)
This ensures the work is stopped before the device state becomes
invalid.
Assisted-by: kimi-cli:kimi-k2.7 code
Assisted-by: atomcode:glm-5.2 #Reported-by
Fixes: 276a568832577 ("wifi: mt76: mt7925: update the power-saving flow")
Cc: [email protected]
Signed-off-by: Wentao Guan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
During device shutdown or removal, a deadlock can occur between the
PCIe remove path and the driver's asynchronous reset work.
The unregistration path calls napi_disable() before cancelling the
reset work. If the reset work runs concurrently, it may re-enable NAPI
and schedule it. Because the device is being unregistered, this can
lead to NAPI state corruption where NAPI is marked as scheduled but
never polled, causing subsequent napi_disable() calls to hang forever.
Fix this by:
1. Moving cancel_work_sync(&dev->reset_work) to the very start of
mt7925e_unregister_device(), ensuring it is stopped before NAPI
is disabled.
2. Setting the MT76_REMOVED flag early in the PCI remove path to
prevent new reset work from being queued.
3. Checking MT76_REMOVED in mt7925_mac_reset_work() and aborting the
reset early if the device is being removed.
Co-developed-by: Fei Shao <[email protected]>
Signed-off-by: JB Tsai <[email protected]>
Tested-by: Rafael Passos <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
mt7925_usb_sdio_tx_prepare_skb() pushes a TX descriptor and a USB
header onto every skb and assumes the headroom for them is already
there. That holds for locally generated traffic, where mac80211
reserves hw->extra_tx_headroom, but forwarded frames are sent through
ieee80211_8023_xmit(), which does not reserve it. Bridge a wired
interface to an mt7925u AP and the first forwarded frame that arrives
short panics the kernel:
skbuff: skb_under_panic: len:415 put:4 tail:0x19b end:0x640 dev:wlan1
kernel BUG at net/core/skbuff.c:212!
Call trace:
skb_panic+0x58/0x60 (P)
skb_push+0x58/0x60
mt7925_usb_sdio_tx_prepare_skb+0xf8/0x1b8 [mt7925_common]
mt76u_tx_queue_skb+0xa0/0x1f8 [mt76_usb]
__mt76_tx_queue_skb+0x54/0xe8 [mt76]
mt76_txq_schedule.part.0+0x204/0x478 [mt76]
mt76_txq_schedule_all+0x50/0x80 [mt76]
mt792x_tx_worker+0x68/0x100 [mt792x_lib]
__mt76_worker_fn+0x84/0x150 [mt76]
Whether a given setup hits it depends on how much headroom the ingress
netdev leaves in its rx skbs. Reproduced on a Raspberry Pi 5 bridging
onboard ethernet to a Netgear A9000; originally reported on an MT7986
router running OpenWrt. Nick Morrow's testing on a Pi 4 (bcmgenet),
which leaves more headroom, helped narrow the trigger to the ingress
path.
The same bug was fixed on mt7921 by commit 98c4d0abf5c4 ("mt76:
mt7921: don't assume adequate headroom for SDIO headers"), but mt7925
was copied from mt7921 without the fix. Add the same guard here.
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Cc: [email protected]
Link: https://github.com/morrownr/mt76/issues/52
Signed-off-by: Devin Wittmayer <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
A use-after-free issue occurs in mt76_rx_poll_complete due to a race
condition. The STA has already been removed, but the rx_status still
had a pointer to the wcid in the STA.
Set the links' wcid pointers to be NULL for a MLD in
mt7925_sta_pre_rcu_remove()
BUG: KASAN: invalid-access in mt76_rx_poll_complete+0x280/0x470
Call trace:
dump_backtrace+0xec/0x128
show_stack+0x18/0x28
dump_stack_lvl+0x40/0xc8
print_report+0x1b8/0x710
kasan_report+0xe0/0x144
do_bad_area+0x120/0x260
do_tag_check_fault+0x20/0x34
do_mem_abort+0x54/0xa8
el1_abort+0x3c/0x5c
el1h_64_sync_handler+0x40/0xcc
el1h_64_sync+0x7c/0x80
mt76_rx_poll_complete+0x280/0x470
mt76_dma_rx_poll+0x114/0x51c
mt792x_poll_rx+0x60/0xf8
napi_threaded_poll_loop+0xe0/0x450
napi_threaded_poll+0x80/0x9c
kthread+0x11c/0x158
ret_from_fork+0x10/0x20
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Eason Lai <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
mt7925_sta_set_decap_offload() iterates over the vif valid_links mask
when updating decap offload state for an MLO station. The station may not
have a link STA for every valid link of the vif, so mt792x_sta_to_link()
can return NULL for a link that belongs to the vif but not to the station.
The function currently dereferences mlink before checking whether the
link WCID is ready. If mlink is NULL, setting or clearing
MT_WCID_FLAG_HDR_TRANS dereferences a NULL pointer.
Skip links without a station link before touching mlink->wcid.
Fixes: b859ad65309a ("wifi: mt76: mt7925: add link handling in mt7925_sta_set_decap_offload")
Signed-off-by: Guangshuo Li <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Skip mt7925 reset handling once the bus is marked hung.
A hung bus cannot be recovered by issuing another device reset. Continuing
the reset path may only send more failing MCU or register accesses and
delay teardown. Return early from reset work and the USB reset path so the
failed device can be torn down quickly.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Stop retrying hardware init once the bus is marked hung.
The control path is no longer usable at that point, so more retries only
issue failing device accesses, including MCU commands or register
operations, and delay teardown. Exit early and let the failed device be
torn down quickly.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7925_rx_check() and
mt7925_queue_rx_skb() dispatch it to mt7925_mac_tx_free() on every bus.
mt7925_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on USB it is NULL, so a
TXRX_NOTIFY there calls a NULL pointer in the RX worker:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Call Trace:
mt7925_mac_tx_free+0x58/0x350 [mt7925_common]
mt7925_rx_check+0xe2/0x130 [mt7925_common]
mt76u_rx_worker+0x1b9/0x620 [mt76_usb]
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488aa9 ("wifi: mt76: connac: do not check WED status for
non-mmio devices").
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Cc: [email protected]
Signed-off-by: Devin Wittmayer <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
A small piece of code in mt7925/regs.h depends on CONFIG_MT76_DEV, which
has never been defined in the kernel. Remove this dead code.
Discovered while searching for CONFIG_* symbols referenced in code but
not defined in any Kconfig file.
Signed-off-by: Ethan Nelson-Moore <[email protected]>
Reviewed-by: Matthias Brugger <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
MT7928 has a different physical address layout. Add a dedicated
mt7928_fixed_map[] remapping table and select it at runtime. Set
mdev->rev early in probe for correct chip revision detection.
Signed-off-by: Leon Yen <[email protected]>
Signed-off-by: Emery Hsin <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Fix the 0x7c500000 remap entry window size from 0x2000000 (32MB) to
0x200000 (2MB) to match the actual addressable range.
This is a preparation patch before enabling MT7928 PCIe support.
Signed-off-by: Emery Hsin <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Rename MT_WTBLON_TOP_WDUCR and MT_WTBL_UPDATE to MT7925-prefixed
versions since MT7928 uses different WTBL register offsets.
This is a preparation patch before enabling MT7928 PCIe support.
Signed-off-by: Emery Hsin <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Add MT7925_PCIE_MAC_{INT_ENABLE,PM} macros and mt7925_pcie_reg
struct. Update all PCIe register accesses in pci.c, pci_mac.c, and
pci_mcu.c to use dev->pcie_reg->{imask,pm}.
This is a preparation patch before enabling MT7928 PCIe support.
Signed-off-by: Xiong <[email protected]>
Signed-off-by: Emery Hsin <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Add MT7927_INT_RX_DONE_{DATA,WM,WM2,ALL} macros and populate
all_complete_mask in mt7927_irq_map. MT7927 maps RX_DONE_DATA to
ENA4 and RX_DONE_WM to ENA6, differing from MT7925.
This is a preparation patch before enabling MT7928 PCIe support.
Signed-off-by: Emery Hsin <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Replace shared MT_INT_RX_DONE_* macros with chip-specific
MT7925_INT_RX_DONE_{DATA,WM,WM2,ALL} and populate all_complete_mask
in mt7925_irq_map. Update resume and mac_reset paths accordingly.
This is a preparation patch before enabling MT7928 PCIe support.
Signed-off-by: Emery Hsin <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
mt76_register_debugfs_fops() returns the dentry from
debugfs_create_dir(), which yields an error pointer on failure
(notably ERR_PTR(-ENODEV) when CONFIG_DEBUG_FS=n), never NULL. Per
commit ff9fb72bc077 ("debugfs: return error values, not NULL"),
callers do not need to check the return value.
Drop the dead !dir checks in mt7615/mt7915/mt7921/mt7925/mt7996
_init_debugfs(). Converting them to IS_ERR() instead would have
exposed a probe abort on CONFIG_DEBUG_FS=n, since each
*_init_debugfs() caller propagates the helper's return value.
This patch supersedes an earlier proposal that converted the checks
to IS_ERR().
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Ingyu Jang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
When FIELD_GET returns 0 for the retry count, subtracting 1 causes
an unsigned integer underflow, resulting in tx_retries becoming a
very large value (0xFFFFFFFF for u32).
Fix by checking if count is non-zero before subtracting 1.
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ryder Lee <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Add per-device USB reset work and a control-path access check helper
for mt7921u and mt7925u.
This prepares common infrastructure for transport-level recovery while
keeping the reset state per-device for correct lifetime handling.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
In mt7925_mac_link_bss_add(), the MT7927 branch added an else-if that
checked mvif->phy->mt76->chandef.chan before assigning it to the local
chan pointer. If that check failed, chan stayed NULL and chan->band was
dereferenced unconditionally a line later.
phy->chandef.chan is set during phy registration in mt76_check_sband()
and is never cleared, so the check is a no-op. Drop it and use the
chandef channel as an unconditional fallback, matching the assumption
made elsewhere in the driver (e.g. the existing basic_rates_idx
selection right below this block and mt7925/mac.c).
Reported-by: kernel test robot <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Closes: https://lore.kernel.org/r/[email protected]/
Signed-off-by: Felix Fietkau <[email protected]>
In mt7925_tm_query(), the response skb from mt76_mcu_send_and_get_msg()
is used in a memcpy without validating its length:
memcpy(evt_resp, skb->data + 8, MT7925_EVT_RSP_LEN);
where MT7925_EVT_RSP_LEN is 512. If the firmware returns a response
shorter than 520 bytes (8 + 512), this reads beyond the skb data
buffer. The over-read data is then returned to userspace via nla_put()
in mt7925_testmode_dump().
Add a length check before the memcpy to ensure the skb contains
sufficient data.
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Aviel Zohar <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
With MLO, traffic for one TID can be sent on any active link. Programming
BA state only on the default link leaves the other active links out of
sync.
Program BA state on all active links instead.
Fixes: 766ea2cf5a39 ("Revert "wifi: mt76: mt7925: Update mt7925_mcu_uni_[tx,rx]_ba for MLO"")
Tested-by: Yao Ting Hsieh <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
