On a STATION vif, removing a TDLS peer takes the mt7925_mac_sta_remove
-> mt7925_mac_sta_remove_links path. The first loop in that function
calls mt7925_mcu_add_bss_info(..., enable=false) for every link of the
station being removed. For a non-MLO STATION vif there is exactly one
link, link 0, whose bss_conf is the AP's. TDLS peers do not have their
own bss_conf - they share the AP's BSS.
The result is that every TDLS peer teardown sends a BSS_INFO_UPDATE
with enable=0 for the AP's BSS to the firmware, which wipes the AP-side
rate-control context. The connection stays associated and TX from the
host still works at the negotiated rate, but the AP's downlink to us
collapses to the lowest mandatory OFDM rate (HE-MCS 0 / 6 Mbit/s OFDM)
and only slowly recovers as rate adaptation re-learns under sustained
traffic. With brief or bursty traffic the link can stay at 6-72 Mbit/s
indefinitely, requiring a manual reconnect.
mt7925_mac_link_sta_remove() already guards its own
mt7925_mcu_add_bss_info(..., false) call with
"vif->type == NL80211_IFTYPE_STATION && !link_sta->sta->tdls".
Add the equivalent guard at the top of the cleanup loop in
mt7925_mac_sta_remove_links(), above the link_sta / link_conf /
mlink / mconf lookups, so TDLS peer teardown skips the loop body
entirely without doing the per-link work that would just be thrown
away.
Verified on mt7925e by triggering Samsung-S938B auto-TDLS via iperf3
and watching iw rx bitrate after teardown:
Before: rx bitrate collapses to 6.0-72.0 Mbit/s, oscillates 17/72/
137/288/432 Mbit/s for 30+ seconds, no full recovery without
a manual reassoc.
After: rx bitrate stays at 1200.9 Mbit/s HE-MCS 11 NSS 2 80 MHz
across the entire TDLS lifecycle.
bpftrace confirms a single mt7925_mcu_add_bss_info(enable=0) call per
teardown before the fix; zero such calls after.
Fixes: 3878b4333602 ("wifi: mt76: mt7925: update mt7925_mac_link_sta_[add, assoc, remove] for MLO")
Cc: [email protected]
Signed-off-by: ElXreno <[email protected]>
Assisted-by: Claude:claude-opus-4-7 bpftrace
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
With HW TX encap offload enabled, the mt76 firmware builds the 802.11
header for the 802.3 frame using the per-WCID context. For a STATION
vif the HDR_TRANS TLV currently sets ToDS=1, which makes the firmware
default to the BSSID as A1 and emit STA->AP-formatted frames
regardless of which peer the WCID points to.
For TDLS-paired peers this is wrong. Data frames go on air addressed
to the AP, the AP MAC-ACKs and silently drops them per IEEE 802.11z
(an AP must not forward to a TDLS-paired peer). Management and
control frames bypass the HW encap path and still reach the peer;
only user data fails.
Add MT_WCID_FLAG_TDLS_PEER, set it in mt7915, mt7921, mt7925 and
mt7996 sta-add paths when sta->tdls is true, and override the
HDR_TRANS TLV in mt76_connac_mcu_wtbl_hdr_trans_tlv() (Connac2 -
mt7915 / mt7921 / mt7922), mt7925_mcu_sta_hdr_trans_tlv() (mt7925)
and mt7996_mcu_sta_hdr_trans_tlv() (mt7996) to set ToDS=0, FromDS=0
when the flag is set. The 3-addr non-DS form matches what 802.11z
uses for direct links; the firmware then constructs the frame with
A1=peer rather than A1=BSSID. HW encap offload remains enabled for
AP and any non-TDLS traffic.
Verified on mt7925e + Samsung S938B over a 5 GHz HE 80 MHz channel
with iperf3 -t 30 to the TDLS peer:
before fix: over the TDLS direct link, 7 TDLS Setup action
frames and 3 RTS frames reach the peer; 0 QoS
Data frames make it through (mgmt/control paths
bypass HW encap, the data path does not). iperf3
stalls.
after fix: 2.90 GBytes transferred at 830 Mbit/s sustained,
0 TCP retransmits.
mt7915, mt7921, mt7922 and mt7996 are not regression-tested in this
change for lack of hardware. Their HDR_TRANS handling mirrors the
verified mt7925 change; the firmware behavior is shared across these
chips.
Signed-off-by: ElXreno <[email protected]>
Assisted-by: Claude:claude-opus-4-7 bpftrace tcpdump
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
This patch is based on a BUG as reported by Bongani Hlope at
https://lore.kernel.org/all/[email protected]/
When a channel-switch announcement (CSA) beacon is received,
cfg80211 queues a wiphy work item that eventually calls
mt7921_channel_switch_rx_beacon(). If the station disconnects
(or the channel context is otherwise torn down) between the
time the work is queued and the time it runs, the driver's
dev->new_ctx pointer can already have been cleared to NULL.
mt7921_channel_switch_rx_beacon() then dereferences new_ctx
unconditionally, triggering a NULL pointer dereference at
address 0x0:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:mt7921_channel_switch_rx_beacon+0x1f/0x100 [mt7921_common]
The same missing guard exists in mt7925_channel_switch_rx_beacon(),
which shares the same code pattern introduced by the same commit.
Add an early-return NULL check for dev->new_ctx in both
mt7921_channel_switch_rx_beacon() and
mt7925_channel_switch_rx_beacon(). When new_ctx is NULL there is
no pending channel switch to process, so returning immediately is
the correct and safe action.
Fixes: 8aa2f59260eb ("wifi: mt76: mt7921: introduce CSA support")
Reported-by: Bongani Hlope <[email protected]>
Oops-Analysis: http://oops.fenrus.org/reports/lkml/[email protected]/report.html
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Arjan van de Ven <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Felix Fietkau <[email protected]>
Cc: Lorenzo Bianconi <[email protected]>
Cc: Ryder Lee <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
mt7925_pci_probe() initializes DMA before registering the device. If
mt7925_register_device() fails, probe returns through err_free_irq without
tearing down DMA state.
That leaves the TX NAPI instance enabled and skips the DMA queue cleanup
that the normal remove path performs through mt7925e_unregister_device().
Add a dedicated unwind label for failures after mt7925_dma_init() succeeds.
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Co-developed-by: Ijae Kim <[email protected]>
Signed-off-by: Ijae Kim <[email protected]>
Signed-off-by: Myeonghun Pak <[email protected]>
Link: https://patch.msgid.link/20260426143728.41534-1-pakmyeonghun@bagmyeonghun-ui-MacBookPro.local
Signed-off-by: Felix Fietkau <[email protected]>
Release host link resources when mt7925_mac_sta_add_links() fails after
partial success.
msta->link[] and dev->mt76.wcid[] may already be published, so unwind
the host state to avoid leaving stale links behind.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Move the msta->link[link_id] publication until after
mt7925_mac_link_sta_add() succeeds.
msta->link[] is RCU-visible, so publishing it before setup completes can
expose a link whose add path later fails. Publish it only after success
to avoid partially initialized link state becoming visible.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Allocate mt792x_link_sta with kzalloc() and free it with kfree_rcu()
instead of devm-managed memory.
msta->link[] is published via RCU, so the link STA must remain valid
until readers have quiesced after teardown. Manage the object lifetime
with kfree_rcu() to match its RCU-visible publication.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Move WCID teardown into mt7925_mac_link_sta_remove() to mirror the
dev->mt76.wcid[] publish done during link add.
This clears the published WCID before the rest of teardown, so WCID
lookups no longer expose a link that is being removed.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Remove the redundant mt76_wcid_init() call after publishing the WCID in
mt7925_mac_link_sta_add().
WCID is already initialized before publication, so reinitializing it
afterward is unnecessary and makes the setup ordering less clear.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Undo the published WCID state when mt7925_mac_link_sta_add() fails after
WCID setup.
The add path can fail after dev->mt76.wcid[] is published, so the error
path must clear the partial host-side WCID state to avoid leaving stale
entries behind.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the dead pri_link check in mt7925_mac_sta_remove_links() and
perform WCID cleanup unconditionally.
mlink->pri_link is already cleared before the test, making the branch
ineffective. This matches the actual teardown behaviour and simplifies
the remove path.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the mt792x_vif_to_link() lookup in mt7925_mcu_wtbl_update_hdr_trans()
and pass the resolved mconf and mlink from the caller instead. The link
context is already known at the call site, making the lookup redundant.
This keeps the helper lookup-free and makes link ownership explicit.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
mt792x_sta_to_link() uses rcu_dereference_protected() and therefore
expects mt76.mutex to be held. Move the lookup after
mt792x_mutex_acquire() to make the locking explicit and correct.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the mt792x_sta_to_link() lookup in mt7925_set_link_key() and pass
the resolved mlink from the caller instead. The link context is already
known at the call site, making the lookup redundant.
This keeps the helper lookup-free and makes link ownership explicit.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the mt792x_sta_to_link() lookup in mt7925_mcu_wtbl_update_hdr_trans()
and pass the resolved mlink from the caller instead. The link context is
already known at the call site, making the lookup redundant.
This keeps the helper lookup-free and makes link ownership explicit.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Replace the dead wcid NULL check in mt7925_mcu_sta_hdr_trans_tlv() with
a WARN_ON_ONCE() guard on mlink before dereferencing mlink->wcid.
wcid is always derived from mlink, so mlink is the only meaningful
object to validate here.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the mt792x_sta_to_link() lookup in mt7925_mcu_sta_hdr_trans_tlv()
and pass the resolved mlink from the caller instead. The link is
already known at the call site, making the lookup redundant.
This keeps the helper lookup-free and makes WCID selection explicit.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the mt792x_sta_to_link() lookup in mt7925_mac_link_sta_remove()
and pass mlink from mt7925_mac_sta_remove_links() instead. The link is
already resolved there, making the extra lookup redundant.
This keeps the remove helper lookup-free and avoids hidden dependence on
msta->link[link_id] during teardown.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Use mlink->wcid.def_wcid to obtain the primary mlink in
mt7925_mac_link_sta_add() instead of calling mt792x_sta_to_link().
The primary link context is already carried by the WCID, so the extra
lookup is redundant. This makes the add path follow the existing WCID
association directly.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the mt792x_sta_to_link() lookup in mt7925_mcu_sta_update() and
pass the resolved mlink from the caller instead. The link context is
already known at the call site, making the lookup redundant.
This keeps the helper lookup-free and makes WCID selection explicit.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the mt792x_sta_to_link() lookup in mt7925_mcu_sta_mld_tlv() and
pass mlink and mconf from the caller instead. The link context is
already known at the call site, making the lookup redundant.
This keeps the helper lookup-free and makes MLD link selection
explicit.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the mt792x_sta_to_link() lookup in mt7925_mcu_bss_basic_tlv() and
pass the resolved WCID indices from the caller instead. The link
context is already known, so the lookup is redundant.
This makes link ownership explicit and keeps the helper lookup-free.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Drop the mt792x_sta_to_link() lookup in mt7925_mcu_sta_amsdu_tlv() and
pass mlink from the caller instead. The link context is already known
so the lookup is redundant.
This makes link ownership explicit and keeps the helper lookup-free.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Check frame length before accessing the mgmt fields in
mt7925_mac_write_txwi_80211 in order to avoid a possible oob access.
Fixes: c948b5da6bbec ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
The previous implementation of __mt7925_mcu_set_clc() set the TLV length
field (.len) incorrectly during CLC command construction. The length was
initialized as sizeof(req) - 4, regardless of the actual segment length.
This could cause the WiFi firmware to misinterpret the command payload,
resulting in command execution errors.
This patch moves the TLV length assignment to after the segment is
selected, and sets .len to sizeof(req) + seg->len - 4, matching the
actual command content. This ensures the firmware receives the
correct TLV length and parses the command properly.
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Cc: [email protected]
Signed-off-by: Quan Zhou <[email protected]>
Acked-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/f56ae0e705774dfa8aab3b99e5bbdc92cd93523e.1772011204.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <[email protected]>
After the chip reset, the procedure to set the tx power will not be
successful because the previous region setting is still remains.
Clear the region setting during MAC initialization and allow it to be
reset to finalize the TX power setting.
Fixes: 3bc62aa4484d ("wifi: mt76: mt7925: add auto regdomain switch support")
Signed-off-by: Leon Yen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
mt76_connac_mcu_alloc_sta_req() allocates an skb which is expected to
be freed eventually by mt76_mcu_skb_send_msg(). However, currently if
an intermediate function fails before sending, the allocated skb is
leaked.
Specifically, mt76_connac_mcu_sta_wed_update() and
mt76_connac_mcu_sta_key_tlv() may fail, leading to an immediate memory
leak in the error path.
Fix this by explicitly freeing the skb in these error paths.
Commit 7c0f63fe37a5 ("wifi: mt76: mt7996: fix memory leak on
mt7996_mcu_sta_key_tlv error") made a similar change.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: d1369e515efe ("wifi: mt76: connac: introduce mt76_connac_mcu_sta_wed_update utility routine")
Fixes: 6683d988089c ("mt76: connac: move mt76_connac_mcu_add_key in connac module")
Fixes: 4f831d18d12d ("wifi: mt76: mt7915: enable WED RX support")
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Zilin Guan <[email protected]>
Link: https://patch.msgid.link/[email protected]
We are experiencing command timeouts because an upper layer triggers
an unexpected scan while the system/device is in suspend.
The upper layer should not initiate scans until the NIC has fully resumed.
We want to prevent scans during suspend and avoid timeouts without harming
power management or user experience.
Signed-off-by: Michael Lo <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
IEEE80211_CHANCTX_CHANGE_PUNCTURING is a channel context change
flag and should not be checked in the BSS change handler, where
the changed mask represents enum ieee80211_bss_change.
Remove the puncturing handling from the BSS path and rely on
mt7925_change_chanctx() to update puncturing configuration.
Fixes: cadebdad959b ("wifi: mt76: mt7925: add EHT preamble puncturing")
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
roc_abort_sync() can deadlock with roc_work(). roc_work() holds
dev->mt76.mutex, while cancel_work_sync() waits for roc_work()
to finish. If the caller already owns the same mutex, both
sides block and no progress is possible.
This deadlock can occur during station removal when
mt76_sta_state() -> mt76_sta_remove() ->
mt7925_mac_sta_remove_link() -> mt7925_mac_link_sta_remove() ->
mt7925_roc_abort_sync() invokes cancel_work_sync() while
roc_work() is still running and holding dev->mt76.mutex.
This avoids the mutex deadlock and preserves exactly-once
work ownership.
Fixes: 45064d19fd3a ("wifi: mt76: mt7925: fix a potential association failure upon resuming")
Co-developed-by: Quan Zhou <[email protected]>
Signed-off-by: Quan Zhou <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Set the MT76_STATE_MCU_RUNNING bit only after mt7921_load_clc()
has successfully completed. Previously, the MCU_RUNNING state
was set before loading CLC, which could cause conflict between
chip mcu_init retry and mac_reset flow, result in chip init fail
and chip abnormal status. By moving the state set after CLC load,
firmware initialization becomes robust and resolves init fail issue.
Signed-off-by: Quan Zhou <[email protected]>
Reviewed-by: [email protected]
Link: https://patch.msgid.link/19ec8e4465142e774f17801025accd0ae2214092.1763465933.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <[email protected]>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
The selection of MLO mode should depend on the capabilities of the STA
rather than those of the peer AP to avoid compatibility issues with
certain APs, such as Xiaomi BE5000 WiFi7 router.
Fixes: 69acd6d910b0c ("wifi: mt76: mt7925: add mt7925_change_vif_links")
Signed-off-by: Leon Yen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Previously, the AMPDU state bit for a given TID was set before attempting
to start a BA session, which could result in the AMPDU state being marked
active even if ieee80211_start_tx_ba_session() failed. This patch changes
the logic to only set the AMPDU state bit after successfully starting a BA
session, ensuring proper synchronization between AMPDU state and BA session
status.
This fixes potential issues with aggregation state tracking and improves
compatibility with mac80211 BA session management.
Fixes: 44eb173bdd4f ("wifi: mt76: mt7925: add link handling in mt7925_txwi_free")
Cc: [email protected]
Signed-off-by: Quan Zhou <[email protected]>
Reviewed-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/d5960fbced0beaf33c30203f7f8fb91d0899c87b.1764228973.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <[email protected]>
Currently, per-radio attributes are set on per-phy basis, i.e., all the
radios present in a wiphy will take attributes values sent from user. But
each radio in a wiphy can get different values from userspace based on
its requirement.
To extend support to set per-radio attributes, add support to get radio
index from userspace. Add an NL attribute - NL80211_ATTR_WIPHY_RADIO_INDEX,
to get user specified radio index for which attributes should be changed.
Pass this to individual drivers, so that the drivers can use this radio
index to change per-radio attributes when necessary. Currently, per-radio
attributes identified are:
NL80211_ATTR_WIPHY_TX_POWER_LEVEL
NL80211_ATTR_WIPHY_ANTENNA_TX
NL80211_ATTR_WIPHY_ANTENNA_RX
NL80211_ATTR_WIPHY_RETRY_SHORT
NL80211_ATTR_WIPHY_RETRY_LONG
NL80211_ATTR_WIPHY_FRAG_THRESHOLD
NL80211_ATTR_WIPHY_RTS_THRESHOLD
NL80211_ATTR_WIPHY_COVERAGE_CLASS
NL80211_ATTR_TXQ_LIMIT
NL80211_ATTR_TXQ_MEMORY_LIMIT
NL80211_ATTR_TXQ_QUANTUM
By default, the radio index is set to -1. This means the attribute should
be treated as a global configuration. If the user has not specified any
index, then the radio index passed to individual drivers would be -1. This
would indicate that the attribute applies to all radios in that wiphy.
Signed-off-by: Roopni Devanathan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
The implementation amounts to setting the driver flag
IEEE80211_VIF_SUPPORTS_CQM_RSSI, and then providing
mechanisms for continuously updating enough information
to be able to provide notifications to userspace when
RSSI drops below a certain threshold
Signed-off-by: Jack Kao <[email protected]>
Signed-off-by: Ming Yen Hsieh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
MediaTek has asked to switch from the ISC license to BSD-3-Clause-Clear,
in order to improve clarity and the legal integrity of the code.
The BSD-3-Clause license includes the "no endorsement" clause, which is
important for protecting the reputation of the original authors and
contributors by preventing unauthorized use of their names for endorsement
purposes.
This clause is absent in the BSD-2-Clause license, which is more permissive
but lacks this specific protection.
This change also cleans up the license of some Kconfig/Makefile files,
which were accidentally marked as GPL.
The GPL 2.0 remains in use on mt76x0, as well as two source files in mt7615
for which the license situation still needs to be clarified.
Signed-off-by: Felix Fietkau <[email protected]>
mt76_eeprom_override has of_get_mac_address, which can return
-EPROBE_DEFER if the nvmem driver gets loaded after mt76 for some
reason.
Make sure this gets passed to probe so that nvmem mac overrides always
work.
Signed-off-by: Rosen Penev <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Set `tx_power_tlv->len` to `msg_len` instead of `sizeof(*tx_power_tlv)`
to ensure the correct message length is sent to firmware.
Cc: [email protected]
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Move the NULL check for 'sta' before dereferencing it to prevent a
possible crash.
Fixes: 44eb173bdd4f ("wifi: mt76: mt7925: add link handling in mt7925_txwi_free")
Signed-off-by: Ming Yen Hsieh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Check for a NULL `vif` before accessing `ieee80211_vif_is_mld(vif)` to
avoid a potential kernel panic in scenarios where `vif` might not be
initialized.
Fixes: ebb1406813c6 ("wifi: mt76: mt7925: add link handling to txwi")
Signed-off-by: Ming Yen Hsieh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
