Packets belonging to the same TID can be sent over multiple links.
AMPDU rx reordering must be performed over all active links. Fix the
problem always using default link for AMPDU rx reordering.
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Non-station wcid entries must not be passed to the rx functions.
In case of the global wcid entry, it could even lead to corruption in the wcid
array due to pointer being casted to struct mt7996_sta_link using container_of.
Fixes: 7464b12b7d92 ("wifi: mt76: mt7996: rework mt7996_rx_get_wcid to support MLO")
Signed-off-by: Felix Fietkau <[email protected]>
When a wcid can't be found, link_sta can be stale from a previous batch.
The code currently assumes that if link_sta is set, wcid is also non-zero.
Fix wcid NULL pointer dereference by resetting link_sta when a wcid entry
can't be found.
Fixes: 62da647a2b20 ("wifi: mt76: mt7996: Add MLO support to mt7996_tx_check_aggr()")
Signed-off-by: Felix Fietkau <[email protected]>
Avoid leaking beacons on unrelated channels during scanning/roc
Fixes: c56d6edebc1f ("wifi: mt76: mt7996: use emulated hardware scan support")
Reported-by: Chad Monroe <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
A new warning in clang [1] points out a couple of places where a hdr
variable is not initialized then passed along to skb_put_data().
drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:1894:21: warning: variable 'hdr' is uninitialized when passed as a const pointer argument here [-Wuninitialized-const-pointer]
1894 | skb_put_data(skb, &hdr, sizeof(hdr));
| ^~~
drivers/net/wireless/mediatek/mt76/mt7996/mcu.c:3386:21: warning: variable 'hdr' is uninitialized when passed as a const pointer argument here [-Wuninitialized-const-pointer]
3386 | skb_put_data(skb, &hdr, sizeof(hdr));
| ^~~
Zero initialize these headers as done in other places in the driver when
there is nothing stored in the header.
Cc: [email protected]
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Link: https://github.com/llvm/llvm-project/commit/00dacf8c22f065cb52efb14cd091d441f19b319e [1]
Closes: https://github.com/ClangBuiltLinux/linux/issues/2104
Signed-off-by: Nathan Chancellor <[email protected]>
Link: https://patch.msgid.link/20250715-mt7996-fix-uninit-const-pointer-v1-1-b5d8d11d7b78@kernel.org
Signed-off-by: Felix Fietkau <[email protected]>
Fix the wcid pointer used in mt7996_mcu_sta_ba routine to properly
support MLO scenario.
Fixes: 98686cd21624c ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
sta->valid_links bitmask can be set even for non-MLO client.
Fixes: dd82a9e02c054 ("wifi: mt76: mt7996: Rely on mt7996_sta_link in sta_add/sta_remove callbacks")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Fis possible Out-Of-Boundary access in mt7996_tx routine if link_id is
set to IEEE80211_LINK_UNSPECIFIED
Fixes: 3ce8acb86b661 ("wifi: mt76: mt7996: Update mt7996_tx to MLO support")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Use proper link_id value for secondary link lookup in
mt7996_mcu_sta_mld_setup_tlv routine.
Fixes: 00cef41d9d8f5 ("wifi: mt76: mt7996: Add mt7996_mcu_sta_mld_setup_tlv() and mt7996_mcu_sta_eht_mld_tlv()")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
ML interfaces can have multiple affiliated links to it and
hence there is a need to report tx power of specified link
rather deflink.
Add changes to report tx power of requested link from mac80211,
also pass link id as an argument in get_tx_power op so that supported
drivers can use it to report link's tx power.
Co-developed-by: Aaradhana Sahu <[email protected]>
Signed-off-by: Aaradhana Sahu <[email protected]>
Signed-off-by: Rameshkumar Sundaram <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
Several places use rcu_dereference to get a wcid entry without validating
if the index exceeds the array boundary. Fix this by using a helper function,
which handles validation.
Signed-off-by: Felix Fietkau <[email protected]>
Since mt7996_mcu_add_rate_ctrl() and mt7996_mcu_set_fixed_field() can't
run in atomic context, move RCU critical section in
mt7996_mcu_add_rate_ctrl() and mt7996_mcu_set_fixed_field(). This patch
fixes a 'sleep while atomic' issue in mt7996_mac_sta_rc_work().
Fixes: 0762bdd30279 ("wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Tested-by: Ben Greear <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Since mt76_mcu_skb_send_msg() routine can't be executed in atomic context,
move RCU section in mt7996_mcu_add_rate_ctrl() and execute
mt76_mcu_skb_send_msg() in non-atomic context. This is a preliminary
patch to fix a 'sleep while atomic' issue in mt7996_mac_sta_rc_work().
Fixes: 0762bdd30279 ("wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Since mt7996_mcu_set_fixed_field() can't be executed in a RCU critical
section, move RCU section in mt7996_mcu_add_rate_ctrl_fixed() and run
mt7996_mcu_set_fixed_field() in non-atomic context. This is a
preliminary patch to fix a 'sleep while atomic' issue in
mt7996_mac_sta_rc_work().
Fixes: 0762bdd30279 ("wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Since mt76_mcu_skb_send_msg() routine can't be executed in atomic context,
move RCU section in mt7996_mcu_set_fixed_field() and execute
mt76_mcu_skb_send_msg() in non-atomic context. This is a preliminary
patch to fix a 'sleep while atomic' issue in mt7996_mac_sta_rc_work().
Fixes: 0762bdd30279 ("wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
One variant of MT7992 has 5 TX paths, so extend the power delta function
to support it. Also, rename nss_delta to path_delta since the value is
based on the number of TX paths rather tha the number of spatial streams.
(path delta [0.5 dBm] = 10 * log(path number) [dBm] * 2)
Co-developed-by: StanleyYP Wang <[email protected]>
Signed-off-by: StanleyYP Wang <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Some management frames are first processed by the firmware and then
passed to the driver through the MCU event rings. In CONNAC3, event rings
do not support scatter-gather and have a size limitation of 2048 bytes.
If a packet sized between 1728 and 2048 bytes arrives from an event ring,
the ring will hang because the driver attempts to use scatter-gather to
process it.
To fix this, include the size of struct skb_shared_info in the MCU RX
buffer size to prevent scatter-gather from being used for event skb in
mt76_dma_rx_fill_buf().
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Co-developed-by: Peter Chiu <[email protected]>
Signed-off-by: Peter Chiu <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
The maximum TX path and NSS may differ on a band. For example, one variant
of the MT7992 has 5 TX paths and 4 NSS on the 5 GHz band. To address this,
add orig_antenna_mask to record the maximum NSS and prevent setting an
invalid NSS in mt7996_set_antenna().
Fixes: 69d54ce7491d ("wifi: mt76: mt7996: switch to single multi-radio wiphy")
Signed-off-by: Peter Chiu <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
IEEE 802.11 fragmentation can only be applied to unicast frames.
Therefore, drop fragments with multicast or broadcast RA. This patch
addresses vulnerabilities such as CVE-2020-26145.
Signed-off-by: Benjamin Lin <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Set the max AMPDU length in the EHT MAC CAP. Without this patch, the
peer station cannot obtain the correct capability, which prevents
achieving peak throughput on the 2 GHz band.
Fixes: 1816ad9381e0 ("wifi: mt76: mt7996: add max mpdu len capability")
Signed-off-by: Peter Chiu <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Fix the beamformee SS field for the mt7996, mt7992 and mt7990 chipsets.
For the mt7992, this value shall be set to 0x4, while the others shall
be set to 0x3.
Fixes: 5b20557593d4 ("wifi: mt76: connac: adjust phy capabilities based on band constraints")
Signed-off-by: Howard Hsu <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
devm_ioremap() returns NULL on error. Currently, mt7996_mmio_wed_init()
does not check for this case, which results in a NULL pointer
dereference.
Prevent null pointer dereference in mt7996_mmio_wed_init()
Fixes: 83eafc9251d6 ("wifi: mt76: mt7996: add wed tx support")
Signed-off-by: Henry Martin <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
In mt7996_stop_phy() the mt7996_phy structure is
dereferenced before the null sanity check which could
lead to a null deref.
Fix by moving the dereference operation after the
sanity check.
Fixes: 69d54ce7491d ("wifi: mt76: mt7996: switch to single multi-radio wiphy")
Signed-off-by: Qasim Ijaz <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
The function mt7996_set_monitor() dereferences phy before
the NULL sanity check.
Fix this to avoid NULL pointer dereference by moving the
dereference after the check.
Fixes: 69d54ce7491d ("wifi: mt76: mt7996: switch to single multi-radio wiphy")
Signed-off-by: Qasim Ijaz <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
If link_conf_dereference_protected() or mt7996_vif_link()
or link_sta_dereference_protected() fail the code jumps to
the error_unlink label and returns ret which is uninitialised.
Fix this by setting err before jumping to error_unlink.
Fixes: c7e4fc362443 ("wifi: mt76: mt7996: Update mt7996_mcu_add_sta to MLO support")
Fixes: dd82a9e02c05 ("wifi: mt76: mt7996: Rely on mt7996_sta_link in sta_add/sta_remove callbacks")
Signed-off-by: Qasim Ijaz <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
This reverts commit 3b522cadedfe6e9e0e8193d7d4ab5aa8d0c73209.
The MTK connac3 has introduced new hardware, SDO (Software Defined
Offload), to offload the process of filling the TX descriptor. Initially,
there were some issues, but after several fixes, it should now be stable,
allowing us to revert this commit.
Additionally, activating SDO is essential for the proper functioning of
features like TX checksum offload.
Signed-off-by: Shayne Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in mt7996_thermal_init() is not checked.
Add NULL check in mt7996_thermal_init(), to handle kernel NULL
pointer dereference error.
Fixes: 69d54ce7491d ("wifi: mt76: mt7996: switch to single multi-radio wiphy")
Signed-off-by: Charles Han <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
The definition of MT_RX_SEL (for rdd_rx_sel) is mixed with the
definition of HWRDD idx.
For example, MT_RX_SEL2 is for background HWRDD idx, not an
option of rdd_rx_sel.
Additionally, HWRDD idx does not exactly map to band idx for
Connac 3 chips. So, add mt7996_get_rdd_idx as a helper function.
Finally, remove some parts of the code inherited from the legacy chips.
For instance,
1. rdd_state is used for single-band-dual-HWRDD chips (for 80+80),
especially the 76xx series.
2. rdd_rx_sel is also used for single-band-dual-HWRDD chips
rx_sel = 0 => RDD0 for WF0, RDD1 for WF2
rx_sel = 1 => RDD0 for WF1, RDD1 for WF3
Chip Variants | 5G rdd idx | Background rdd idx
---------------------------|----------------|-------------------
MT7996 (except 205/255) | 1 | 2
MT7992 | 1 | 2
MT7990 | 1 | 2
Signed-off-by: StanleyYP Wang <[email protected]>
Reviewed-by: Shayne Chen <[email protected]>
Reviewed-by: Money Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
