Felix Fietkau
3413961e36
mt7603: avoid reordering qos-null data packets
...
Signed-off-by: Felix Fietkau <[email protected] >
2018-02-09 11:19:11 +01:00
Felix Fietkau
9c2e03dd0a
mt7603: fix rx LDPC reporting
...
Signed-off-by: Felix Fietkau <[email protected] >
2018-01-25 16:46:58 +01:00
Felix Fietkau
3968dae910
mt7603: fix 40 mhz channel bandwidth reporting
...
Signed-off-by: Felix Fietkau <[email protected] >
2018-01-25 16:44:06 +01:00
Felix Fietkau
c6f8caced2
mt76: let mac80211 validate CCMP PN for fragmented frames
...
The rules for those are more complex and performance is not an issue
here
Signed-off-by: Felix Fietkau <[email protected] >
2018-01-25 11:29:25 +01:00
Felix Fietkau
9b2c77826d
mt76: validate rx CCMP PN
...
Apparently hardware does not perform CCMP PN validation in hardware, so
we need to take care of this in the driver.
Signed-off-by: Felix Fietkau <[email protected] >
2018-01-22 11:06:19 +01:00
Felix Fietkau
461cdf9f01
mt76: pass the per-vif wcid to the core for multicast rx
...
Preparation for adding software rx CCMP PN validation
Signed-off-by: Felix Fietkau <[email protected] >
2018-01-22 11:06:17 +01:00
Felix Fietkau
b0508d3044
mt76: implement A-MPDU rx reordering in the driver code
...
This is required for performing CCMP PN validation in software
Signed-off-by: Felix Fietkau <[email protected] >
2018-01-22 10:43:21 +01:00
Felix Fietkau
58a41f17aa
mt76: get station pointer by wcid and pass it to mac80211
...
Avoids the rhashtable lookup based on the MAC address inside mac80211
Signed-off-by: Felix Fietkau <[email protected] >
2018-01-22 10:14:25 +01:00
Felix Fietkau
ad3f8e924e
mt76: add an intermediate struct for rx status information
...
Preparation for passing in more internal rx data via skb->cb
Signed-off-by: Felix Fietkau <[email protected] >
2018-01-21 10:48:29 +01:00
Felix Fietkau
4d4cd05966
Partially revert "mt7603: use mcu command to set timing registers, fix OFDM timeout values"
...
This reverts commit 268467b9a4 .
It is unnecessary to go through the MCU for this.
Signed-off-by: Felix Fietkau <[email protected] >
2017-12-07 17:09:28 +01:00
Felix Fietkau
8e17d36381
mt7603: remove some harmless WARN_ONs in rx path
...
Discard affected packets instead. Should reduce the frequency of bogus
bug reports
Signed-off-by: Felix Fietkau <[email protected] >
2017-12-03 18:15:05 +01:00
Felix Fietkau
57a2e334ec
mt7603: set tx-skip flag for powersave clients
...
Helps flush out frames faster
Signed-off-by: Felix Fietkau <[email protected] >
2017-12-03 17:32:34 +01:00
Felix Fietkau
e953c78806
mt7603: clear wtbl PS bit for powersave responses
...
Avoids filtering frames that are supposed to be sent
Signed-off-by: Felix Fietkau <[email protected] >
2017-12-03 16:49:02 +01:00
Felix Fietkau
96817d63ea
mt7603: make mt7603_mac_watchdog_reset() static
...
Signed-off-by: Felix Fietkau <[email protected] >
2017-12-03 16:49:02 +01:00
Felix Fietkau
c079960b59
mt7603: clean up dma debug reads
...
Signed-off-by: Felix Fietkau <[email protected] >
2017-12-02 11:11:58 +01:00
Felix Fietkau
d8a59901ec
mt7603: warn if PSE reset fails
...
Signed-off-by: Felix Fietkau <[email protected] >
2017-12-02 10:50:08 +01:00
Felix Fietkau
c8807b4a3c
mt7603: simplify PSE reset
...
Skip PSE client reset, it is done by the firmware already
Signed-off-by: Felix Fietkau <[email protected] >
2017-12-02 10:49:14 +01:00
Felix Fietkau
d99092baab
mt7603: remove WARN_ON_ONCE for workaround checks
...
It can happen during normal operation and it confuses users more than it
actually helps. workaround trigger counts are still available via
debugfs
Signed-off-by: Felix Fietkau <[email protected] >
2017-12-02 10:43:39 +01:00
Felix Fietkau
8026638543
mt7603: rename MT_PSE_RESET register
...
It is actually a dummy control register used for communicating reset
state with the MCU firmware
Signed-off-by: Felix Fietkau <[email protected] >
2017-12-01 17:50:59 +01:00
Felix Fietkau
737cf2b6f7
mt7603: rename mt7603_mac_reset to mt7603_pse_reset
...
Signed-off-by: Felix Fietkau <[email protected] >
2017-12-01 17:38:39 +01:00
Felix Fietkau
e78156982f
update to latest mac80211/cfg80211 API changes
...
Signed-off-by: Hauke Mehrtens <[email protected] >
Signed-off-by: Felix Fietkau <[email protected] >
2017-10-05 20:50:48 +02:00
Lorenzo Bianconi and Felix Fietkau
21f20b46e3
mt7603: mac: fix register configuration in mt7603_rx_dma_busy()
...
Signed-off-by: Lorenzo Bianconi <[email protected] >
2017-09-09 17:45:15 +02:00
Lorenzo Bianconi and Felix Fietkau
cb83f3329f
mt7603: mac: fix logic in mt7603_tx_hang()
...
Signed-off-by: Lorenzo Bianconi <[email protected] >
2017-09-09 17:45:07 +02:00
Lorenzo Bianconi and Felix Fietkau
8dee788e05
mt7603: mac: stop netdev queues during watchdog reset
...
Signed-off-by: Lorenzo Bianconi <[email protected] >
2017-07-17 10:21:59 +02:00
Lorenzo Bianconi and Felix Fietkau
8a649c3b1e
mt7603: mac: code optimization
...
Remove unnecessary return instruction and time variable in
mt7603_mac_work()
Signed-off-by: Lorenzo Bianconi <[email protected] >
2017-07-15 10:30:56 +02:00
Lorenzo Bianconi and Felix Fietkau
e90a81a552
mt7603: fix channel width fall back in TXWI
...
Signed-off-by: Lorenzo Bianconi <[email protected] >
2017-07-04 10:55:39 +02:00
Felix Fietkau
c4e3deaa58
mt7603: use the real vif index in txwi header for normal tx.
...
Fixes rate control for multi-vif. Beacons and buffered multicast packets
still need the adjusted index
Signed-off-by: Felix Fietkau <[email protected] >
2017-07-01 16:53:18 +02:00
Felix Fietkau
32eab505a4
mt7603: set wtbl entry vif index
...
Signed-off-by: Felix Fietkau <[email protected] >
2017-07-01 16:46:34 +02:00
Lorenzo Bianconi and Felix Fietkau
cf4ba12871
mt7603: avoid tx rate sampling using no retransmissions
...
Since the TXWI has no room for the MRR reconfigure the MT_WTBL registers
using the sample rate as first tx rate for channel probing avoiding
very low TCP performance in a lossy environment
Signed-off-by: Lorenzo Bianconi <[email protected] >
Signed-off-by: Felix Fietkau <[email protected] >
2017-06-26 14:06:56 +02:00
Lorenzo Bianconi and Felix Fietkau
01fb9ba096
mt7603: fix control/status retries count estimation
...
Refactor tx count computation for fixed_rate frames in status path
Signed-off-by: Lorenzo Bianconi <[email protected] >
2017-06-26 14:06:44 +02:00
Felix Fietkau
af326156d9
mt7603: change auto rate control register initialization
...
Allow the hardware to fall back if rates stop working, make the first
rate fail earlier.
Signed-off-by: Felix Fietkau <[email protected] >
Signed-off-by: Lorenzo Bianconi <[email protected] >
2017-06-26 14:06:31 +02:00
Felix Fietkau
219c8dc717
mt7603: fix endian issue in CCMP PN
...
Signed-off-by: Felix Fietkau <[email protected] >
2017-05-26 09:40:49 +02:00
Felix Fietkau
b8a7d0729e
mt7603: fix rate update bw fallback index
...
Signed-off-by: Felix Fietkau <[email protected] >
2017-05-26 08:59:00 +02:00
Felix Fietkau
7168d59902
mt7603: reset PSE queue hang indicator bits
...
Signed-off-by: Felix Fietkau <[email protected] >
2017-03-21 14:47:01 +01:00
Felix Fietkau
38bae1d303
mt7603: improve reliability of the PSE reset
...
Signed-off-by: Felix Fietkau <[email protected] >
2017-03-21 14:44:39 +01:00
Felix Fietkau
e2d298d071
mt7603: issue tx reset bit 2 before DMA reset
...
Signed-off-by: Felix Fietkau <[email protected] >
2017-03-21 10:44:53 +01:00
Felix Fietkau
59ce2b491b
mt7603: set tx vif own MAC index (needed for beacons)
...
Signed-off-by: Felix Fietkau <[email protected] >
2017-03-15 14:24:44 +01:00
Felix Fietkau
e54add55e0
mt7603: move napi/tasklet enable/disable outside of the locked section
...
Should help prevent deadlocks
Signed-off-by: Felix Fietkau <[email protected] >
2017-03-15 14:24:42 +01:00
Felix Fietkau
da8e79696d
mt7603: check wtbl busy status and stop/start tx queues when clearing sta entry
...
Signed-off-by: Felix Fietkau <[email protected] >
2017-03-15 14:24:40 +01:00
Felix Fietkau
dce8aac5c4
mt7603: fix endian issue in mt7603_mac_fill_rx
...
Signed-off-by: Felix Fietkau <[email protected] >
2017-03-15 14:24:35 +01:00
Felix Fietkau
f8f49d2428
mt7603: return -EOPNOTSUPP on unsupported ciphers
...
Signed-off-by: Felix Fietkau <[email protected] >
2017-01-14 23:05:46 +01:00
Felix Fietkau
7ce4368c3d
mt7603: work around a compiler issue on accessing 802.11 header fields
...
For some reason the FIELD_GET call runs into a BUILD_BUG_ON on some
platforms when using the 802.11 frame type/subtype definitions.
Use mask and shift explicitly to work around this
Signed-off-by: Felix Fietkau <[email protected] >
2016-12-15 13:00:17 +01:00
Felix Fietkau
b300bdc42e
use the new bitfield accessor macros
...
Signed-off-by: Felix Fietkau <[email protected] >
2016-09-04 17:37:26 +02:00
Felix Fietkau
53c1b7f6ac
update my email address
...
Signed-off-by: Felix Fietkau <[email protected] >
2016-09-04 17:33:28 +02:00
Felix Fietkau
ced81a3458
relicense to ISC (except for util.h which is based on GPL'd kernel code
...
Signed-off-by: Felix Fietkau <[email protected] >
2016-07-12 08:38:46 +02:00
Felix Fietkau
f30fa6c56c
mt7603: poll for rate update completion before setting sta->wcid.tx_rate_set for the first time
...
Signed-off-by: Felix Fietkau <[email protected] >
2016-06-17 10:54:51 +02:00
Felix Fietkau
3c8a4bc30e
mt76x2: implement survey support
...
Signed-off-by: Felix Fietkau <[email protected] >
2016-06-15 16:47:23 +02:00
Felix Fietkau
6c4b37be98
move dev->chandef to mt76 struct
...
Signed-off-by: Felix Fietkau <[email protected] >
2016-06-15 15:47:49 +02:00
Felix Fietkau
13c29223ef
Use NL80211_BAND_2GHZ instead of IEEE80211_BAND_2GHZ
...
Signed-off-by: Felix Fietkau <[email protected] >
2016-05-14 16:49:30 +02:00
Felix Fietkau
dd828b7fc6
mt7603: fix initialization of the rate fallback table
...
Signed-off-by: Felix Fietkau <[email protected] >
2016-03-09 12:43:32 +01:00