The per-chain response-frame RSSI values are packed one per byte, but the
4th chain was extracted with GENMASK(31, 14) instead of GENMASK(31, 24).
The wrong mask overlaps chains 1-3 and shifts by 14, producing a garbage
chain-3 value that corrupts ack_signal/avg_ack_signal on 4x4 radios.
Extract the correct byte.
Fixes: a71b648e3527 ("wifi: mt76: mt7915: add ack signal support")
Fixes: ea5d99d07fbf ("wifi: mt76: mt7996: enable ack signal support")
Fixes: 67fc7a304bf5 ("wifi: mt76: mt7921: add ack signal support")
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Introduce regulatory wiphy self-managed mode support for MT7921,
allowing the driver to manage its own regulatory domain independently
from the kernel's regulatory framework.
Signed-off-by: Charlie-cy Wu <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Split mt7921_mcu_regd_update() into two functions to prevent recursive
mutex acquisition. Introduce __mt7921_mcu_regd_update() as the internal
implementation that assumes the mutex is already held by the caller,
while mt7921_mcu_regd_update() remains as the external interface that
handles mutex acquisition and release.
This fixes a deadlock issue when mt7921_regd_set_6ghz_power_type() is
called with the device mutex already held. Without this change, calling
mt7921_mcu_regd_update() would attempt to acquire the same mutex again,
causing a recursive lock deadlock.
The __mt7921_mcu_regd_update() function can be safely called when the
caller has already acquired the device mutex, avoiding the deadlock
while maintaining proper synchronization for regulatory domain updates.
Fixes: dc2608cf5224 ("wifi: mt76: mt7921: refactor regulatory notifier flow")
Signed-off-by: Charlie-cy Wu <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
When an AER error occurs and the bus is hung, the register reads return
0xFFFFFFFF, causing the DMA queue state to be corrupted and resulting in
an invalid memory access when accessing q->desc[] or q->entry[].
Unable to handle kernel paging request at virtual address
ffffffc01099eac0
pc : mt76_dma_add_buf+0x124/0x188 [mt76]
lr : mt76_dma_rx_fill+0x11c/0x1d8 [mt76]
sp : ffffffc016d9bbf0
x29: ffffffc016d9bc10 x28: 0000000000000000
x27: 0000000000000000 x26: ffffffb7855e50b8
x25: ffffffb80d04f000 x24: 0000000000000000
x23: 0000000000000ec0 x22: ffffffb796803648
x21: ffffffb796801f80 x20: ffffffb7968035f8
x19: 0000000000000ec0 x18: 0000000000000000
x17: 000000004ec00000 x16: 000000000ec00000
x15: ffffffc01099eac0 x14: 000000004ec00000
x13: 00000000ffc5a000 x12: ffffffc016d9bc32
x11: 00000000ffffffff x10: 0000000000000002
x9 : 0000000000000000 x8 : 000000000000b4ac
x7 : 0000000000000a20 x6 : ffffffb6c1806400
x5 : 0000000000000000 x4 : ffffffb80d04f000
x3 : 0000000000000000 x2 : 0000000000000001
x1 : 000000000ec04000 x0 : ffffffb7968035f8
Call trace:
mt76_dma_add_buf+0x124/0x188 [mt76 (HASH:1029 4)]
mt76_dma_rx_reset+0xe8/0xfc [mt76 (HASH:1029 4)]
mt7921_wpdma_reset+0x188/0x1b0 [mt7921e (HASH:ee48 5)]
mt7921e_mac_reset+0x128/0x418 [mt7921e (HASH:ee48 5)]
mt7921_mac_reset_work+0xac/0x1a8 [mt7921_common (HASH:f721 6)]
process_one_work+0x188/0x514
worker_thread+0x12c/0x300
kthread+0x140/0x1fc
ret_from_fork+0x10/0x30
Fix the invalid memory access by validating the DMA index read from the
hardware before it is used as a queue index. An out-of-range value, such
as the 0xFFFFFFFF returned while the bus is hung, is now clamped so it can
no longer corrupt q->head or q->tail. In addition, check the bus_hung flag
in mt7921_mac_reset_work() before attempting the reset sequence, reject MCU
messages while the bus is hung, and install no-op bus operations when an
unrecoverable AER error is detected, preventing further invalid hardware
accesses.
Due to hardware limitations - such as the lack of a connected hardware
reset pin or the absence of host re-probe functionality - affected Wi-Fi
devices may not fully recover to a normal operational state after
certain errors, even with AER enabled.
Fixes: 17f1de56df05 ("mt76: add common code shared between multiple chipsets")
Co-developed-by: Sean Wang <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Co-developed-by: Jeff Hsu <[email protected]>
Signed-off-by: Jeff Hsu <[email protected]>
Signed-off-by: Eason Lai <[email protected]>
Co-developed-by: Michael Lo <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
The ownership of sk_buff skb is passed to mt7921_queue_rx_skb, each
path inside it under the switch case handles cleaning of skb and it
is true for mt7921_mcu_rx_event as well.
mt7921_mcu_rx_event, on a success path, either queues skb via
mt76_mcu_rx_event or cleans it immediately inside
mt7921_mcu_uni_rx_unsolicited_event.
However inside mt7921_mcu_rx_event, if skb_linearize fails, the function
returns immediately and never bothers cleaning skb which leaks skb.
Since skb is fully owned at this point, it is safe to call
dev_kfree_skb which fixes the leak.
Granted, the skb_linearize failure is rare as it can only fail under
heavy memory usage, but at the same time, leaking memory under heavy
memory usage can worsen the OOM condition.
Signed-off-by: Prashant Rahul <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
The CLC region is supplied by firmware, but the loader trusts the
region count and each record length. A malformed image can make the
region table pointer precede the firmware buffer, make the record loop
fail to advance, or index phy->clc past its end. Validate the table and
record bounds before dereferencing or copying.
Fixes: 23bdc5d8cadf ("wifi: mt76: mt7921: introduce Country Location Control support")
Signed-off-by: Laxman Acharya Padhya <[email protected]>
Link: https://patch.msgid.link/CAMyXUJmh=WfwC4_KHupNxYR5e2Gy5QhBDL5TSG6XEW-XLa+X4Q@mail.gmail.com
Signed-off-by: Felix Fietkau <[email protected]>
PKT_TYPE_TXRX_NOTIFY is an mmio-only event, but mt7921_rx_check() and
mt7921_queue_rx_skb() dispatch it to mt7921_mac_tx_free() on every bus.
mt7921_mac_tx_free() cleans the DMA tx queues with
mt76_queue_tx_cleanup(), which calls queue_ops->tx_cleanup(). Only the
mmio queue ops implement that callback; on USB and SDIO it is NULL, so
a TXRX_NOTIFY there calls a NULL pointer in the RX worker:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Call Trace:
mt7921_mac_tx_free+0x64/0x310 [mt7921_common]
mt7921_rx_check+0x5f/0xf0 [mt7921_common]
mt76u_rx_worker+0x1b9/0x620 [mt76_usb]
Drop the event on non-mmio buses via mt76_is_mmio(), as in
commit 5683e1488aa9 ("wifi: mt76: connac: do not check WED status for
non-mmio devices").
Fixes: 48fab5bbef40 ("mt76: mt7921: introduce mt7921s support")
Cc: [email protected]
Signed-off-by: Devin Wittmayer <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Add MT_PCIE_MAC_{INT_ENABLE,PM} definitions to mt7921/regs.h and
wire up mt7921_pcie_reg in mt7921_pci_probe() to provide connac2
series chips with their own PCIe register definitions.
This is a preparation patch before enabling MT7928 PCIe support.
Signed-off-by: Xiong <[email protected]>
Signed-off-by: Emery Hsin <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Populate all_complete_mask in MT7921 irq_map and update pci_resume()
and mac_reset() to use irq_map->rx.all_complete_mask instead of the
hardcoded MT_INT_RX_DONE_ALL macro.
This is a preparation patch before enabling MT7928 PCIe support.
Signed-off-by: Emery Hsin <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
mt76_register_debugfs_fops() returns the dentry from
debugfs_create_dir(), which yields an error pointer on failure
(notably ERR_PTR(-ENODEV) when CONFIG_DEBUG_FS=n), never NULL. Per
commit ff9fb72bc077 ("debugfs: return error values, not NULL"),
callers do not need to check the return value.
Drop the dead !dir checks in mt7615/mt7915/mt7921/mt7925/mt7996
_init_debugfs(). Converting them to IS_ERR() instead would have
exposed a probe abort on CONFIG_DEBUG_FS=n, since each
*_init_debugfs() caller propagates the helper's return value.
This patch supersedes an earlier proposal that converted the checks
to IS_ERR().
Link: https://lore.kernel.org/all/[email protected]
Signed-off-by: Ingyu Jang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
mt7921_change_chanctx() configures the channel for monitor vifs but
does not re-assert sniffer mode. mt7925_change_chanctx() does. Match
mt7925 by adding the missing mt7921_mcu_set_sniffer(true) call,
completing the architectural pattern from commit 914189af23b8 ("wifi:
mt76: mt7921: fix channel switch fail in monitor mode").
The user-visible regression this asymmetry produced on v6.17 and v6.18
was addressed by commit cdb2941a516c ("Revert "wifi: mt76: mt792x:
improve monitor interface handling"") in v6.19 and backported to the
6.17.y and 6.18.y stable trees. This patch is defense in depth in
case the NO_VIRTUAL_MONITOR change is reintroduced in a future series.
Tested-by: Nick Morrow <[email protected]>
Tested-on: RasPi4B, RasPiOS 64 bit, Alfa AWUS036AXML mt7921u
Tested-on: RasPi4B, RasPiOS 64 bit, Netgear A9000 mt7925u
Signed-off-by: Devin Wittmayer <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
When FIELD_GET returns 0 for the retry count, subtracting 1 causes
an unsigned integer underflow, resulting in tx_retries becoming a
very large value (0xFFFFFFFF for u32).
Fix by checking if count is non-zero before subtracting 1.
Fixes: 9aecfa754c7f ("wifi: mt76: mt7921e: report tx retries/failed counts in tx free event")
Signed-off-by: Ryder Lee <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Implement 802.11d-based automatic regulatory domain switching to
dynamically determine the regulatory domain at runtime.
The scan-done event structure by reusing reserved padding and appending
new fields; the layout and values remains backward-compatible with
existing users.
Co-developed-by: Sean Wang <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Signed-off-by: JB Tsai <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Add per-device USB reset work and a control-path access check helper
for mt7921u and mt7925u.
This prepares common infrastructure for transport-level recovery while
keeping the reset state per-device for correct lifetime handling.
No functional change intended.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
With HW TX encap offload enabled, the mt76 firmware builds the 802.11
header for the 802.3 frame using the per-WCID context. For a STATION
vif the HDR_TRANS TLV currently sets ToDS=1, which makes the firmware
default to the BSSID as A1 and emit STA->AP-formatted frames
regardless of which peer the WCID points to.
For TDLS-paired peers this is wrong. Data frames go on air addressed
to the AP, the AP MAC-ACKs and silently drops them per IEEE 802.11z
(an AP must not forward to a TDLS-paired peer). Management and
control frames bypass the HW encap path and still reach the peer;
only user data fails.
Add MT_WCID_FLAG_TDLS_PEER, set it in mt7915, mt7921, mt7925 and
mt7996 sta-add paths when sta->tdls is true, and override the
HDR_TRANS TLV in mt76_connac_mcu_wtbl_hdr_trans_tlv() (Connac2 -
mt7915 / mt7921 / mt7922), mt7925_mcu_sta_hdr_trans_tlv() (mt7925)
and mt7996_mcu_sta_hdr_trans_tlv() (mt7996) to set ToDS=0, FromDS=0
when the flag is set. The 3-addr non-DS form matches what 802.11z
uses for direct links; the firmware then constructs the frame with
A1=peer rather than A1=BSSID. HW encap offload remains enabled for
AP and any non-TDLS traffic.
Verified on mt7925e + Samsung S938B over a 5 GHz HE 80 MHz channel
with iperf3 -t 30 to the TDLS peer:
before fix: over the TDLS direct link, 7 TDLS Setup action
frames and 3 RTS frames reach the peer; 0 QoS
Data frames make it through (mgmt/control paths
bypass HW encap, the data path does not). iperf3
stalls.
after fix: 2.90 GBytes transferred at 830 Mbit/s sustained,
0 TCP retransmits.
mt7915, mt7921, mt7922 and mt7996 are not regression-tested in this
change for lack of hardware. Their HDR_TRANS handling mirrors the
verified mt7925 change; the firmware behavior is shared across these
chips.
Signed-off-by: ElXreno <[email protected]>
Assisted-by: Claude:claude-opus-4-7 bpftrace tcpdump
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
This patch is based on a BUG as reported by Bongani Hlope at
https://lore.kernel.org/all/[email protected]/
When a channel-switch announcement (CSA) beacon is received,
cfg80211 queues a wiphy work item that eventually calls
mt7921_channel_switch_rx_beacon(). If the station disconnects
(or the channel context is otherwise torn down) between the
time the work is queued and the time it runs, the driver's
dev->new_ctx pointer can already have been cleared to NULL.
mt7921_channel_switch_rx_beacon() then dereferences new_ctx
unconditionally, triggering a NULL pointer dereference at
address 0x0:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:mt7921_channel_switch_rx_beacon+0x1f/0x100 [mt7921_common]
The same missing guard exists in mt7925_channel_switch_rx_beacon(),
which shares the same code pattern introduced by the same commit.
Add an early-return NULL check for dev->new_ctx in both
mt7921_channel_switch_rx_beacon() and
mt7925_channel_switch_rx_beacon(). When new_ctx is NULL there is
no pending channel switch to process, so returning immediately is
the correct and safe action.
Fixes: 8aa2f59260eb ("wifi: mt76: mt7921: introduce CSA support")
Reported-by: Bongani Hlope <[email protected]>
Oops-Analysis: http://oops.fenrus.org/reports/lkml/[email protected]/report.html
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Arjan van de Ven <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Felix Fietkau <[email protected]>
Cc: Lorenzo Bianconi <[email protected]>
Cc: Ryder Lee <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
When pcim_iomap_region() or devm_kmemdup() fail, the code returns
directly without cleaning up previously allocated resources:
- mt76_device allocated by mt76_alloc_device()
- pci irq vectors allocated by pci_alloc_irq_vectors()
Fix this by jumping to the existing error cleanup path instead of
returning directly.
Fixes: ee5bb35d2b83 ("wifi: mt76: mt7921: switch to pcim_iomap_region")
Signed-off-by: Hongling Zeng <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Call mt7921_regd_update() instead of mt7921_mcu_set_clc() when setting
the 6GHz power type after connection, so that regulatory limits and SAR
power are also applied.
Fixes: 51ba0e3a15eb ("wifi: mt76: mt7921: add 6GHz power type support for clc")
Signed-off-by: Michael Lo <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Add MT7902 PCIe specific DMA layout overrides for MCU TXQ index, RX ring
size, and MCU_WA usage. Common layout remains the default for other chips.
This is a prerequisite patch before enabling MT7902 PCIe support.
Co-developed-by: Xiong Huang <[email protected]>
Signed-off-by: Xiong Huang <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
MT7902 PCIe requires a different wm2_complete_mask value, so introduce a
mutable per-device copy of the default irq_map and override the field
only for this chip. Other devices continue using the shared const
template.
This is a prerequisite patch before enabling MT7902 PCIe support.
Co-developed-by: Xiong Huang <[email protected]>
Signed-off-by: Xiong Huang <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Replace explicit napi_disable() calls for RX queues with
mt76_for_each_q_rx() in mt7921e_mac_reset().
This removes hardcoded queue indices and disables all configured
RX queues during reset.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
roc_abort_sync() can deadlock with roc_work(). roc_work() holds
dev->mt76.mutex, while cancel_work_sync() waits for roc_work()
to finish. If the caller already owns the same mutex, both
sides block and no progress is possible.
This deadlock can occur during station removal when
mt76_sta_state() -> mt76_sta_remove() -> mt7921_mac_sta_remove() ->
mt7921_roc_abort_sync() invokes cancel_work_sync() while
roc_work() is still running and holding dev->mt76.mutex.
This avoids the mutex deadlock and preserves exactly-once
work ownership.
Fixes: 352d966126e6 ("wifi: mt76: mt7921: fix a potential association failure upon resuming")
Co-developed-by: Quan Zhou <[email protected]>
Signed-off-by: Quan Zhou <[email protected]>
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
The mt7921_set_roc API may be executed concurrently with mt7921_roc_work,
specifically between the following code paths:
- The check and clear of MT76_STATE_ROC in mt7921_roc_work:
if (!test_and_clear_bit(MT76_STATE_ROC, &phy->mt76->state))
return;
- The execution of ieee80211_iterate_active_interfaces.
This race condition can interrupt the ROC abort flow, resulting in
the ROC process failing to abort as expected.
To address this defect, the modification of MT76_STATE_ROC is now
protected by mt792x_mutex_acquire(phy->dev). This ensures that
changes to the ROC state are properly synchronized, preventing
race conditions and ensuring the ROC abort flow is not interrupted.
Fixes: 034ae28b56f1 ("wifi: mt76: mt7921: introduce remain_on_channel support")
Cc: [email protected]
Signed-off-by: Quan Zhou <[email protected]>
Reviewed-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/2568ece8b557e5dda79391414c834ef3233049b6.1769133724.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <[email protected]>
Set the MT76_STATE_MCU_RUNNING bit only after mt7921_load_clc()
has successfully completed. Previously, the MCU_RUNNING state
was set before loading CLC, which could cause conflict between
chip mcu_init retry and mac_reset flow, result in chip init fail
and chip abnormal status. By moving the state set after CLC load,
firmware initialization becomes robust and resolves init fail issue.
Signed-off-by: Quan Zhou <[email protected]>
Reviewed-by: [email protected]
Link: https://patch.msgid.link/19ec8e4465142e774f17801025accd0ae2214092.1763465933.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <[email protected]>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Currently, per-radio attributes are set on per-phy basis, i.e., all the
radios present in a wiphy will take attributes values sent from user. But
each radio in a wiphy can get different values from userspace based on
its requirement.
To extend support to set per-radio attributes, add support to get radio
index from userspace. Add an NL attribute - NL80211_ATTR_WIPHY_RADIO_INDEX,
to get user specified radio index for which attributes should be changed.
Pass this to individual drivers, so that the drivers can use this radio
index to change per-radio attributes when necessary. Currently, per-radio
attributes identified are:
NL80211_ATTR_WIPHY_TX_POWER_LEVEL
NL80211_ATTR_WIPHY_ANTENNA_TX
NL80211_ATTR_WIPHY_ANTENNA_RX
NL80211_ATTR_WIPHY_RETRY_SHORT
NL80211_ATTR_WIPHY_RETRY_LONG
NL80211_ATTR_WIPHY_FRAG_THRESHOLD
NL80211_ATTR_WIPHY_RTS_THRESHOLD
NL80211_ATTR_WIPHY_COVERAGE_CLASS
NL80211_ATTR_TXQ_LIMIT
NL80211_ATTR_TXQ_MEMORY_LIMIT
NL80211_ATTR_TXQ_QUANTUM
By default, the radio index is set to -1. This means the attribute should
be treated as a global configuration. If the user has not specified any
index, then the radio index passed to individual drivers would be -1. This
would indicate that the attribute applies to all radios in that wiphy.
Signed-off-by: Roopni Devanathan <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Johannes Berg <[email protected]>
The buf_len is used to limit the iterations for retrieving the country
power setting and may underflow under certain conditions due to changes
in the power table in CLC.
This underflow leads to an almost infinite loop or an invalid power
setting resulting in driver initialization failure.
Cc: [email protected]
Fixes: fa6ad88e023d ("wifi: mt76: mt7921: fix country count limitation for CLC")
Signed-off-by: Leon Yen <[email protected]>
Signed-off-by: Ming Yen Hsieh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
MediaTek has asked to switch from the ISC license to BSD-3-Clause-Clear,
in order to improve clarity and the legal integrity of the code.
The BSD-3-Clause license includes the "no endorsement" clause, which is
important for protecting the reputation of the original authors and
contributors by preventing unauthorized use of their names for endorsement
purposes.
This clause is absent in the BSD-2-Clause license, which is more permissive
but lacks this specific protection.
This change also cleans up the license of some Kconfig/Makefile files,
which were accidentally marked as GPL.
The GPL 2.0 remains in use on mt76x0, as well as two source files in mt7615
for which the license situation still needs to be clarified.
Signed-off-by: Felix Fietkau <[email protected]>
mt76_eeprom_override has of_get_mac_address, which can return
-EPROBE_DEFER if the nvmem driver gets loaded after mt76 for some
reason.
Make sure this gets passed to probe so that nvmem mac overrides always
work.
Signed-off-by: Rosen Penev <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Embedding net_device into structures prohibits the usage of flexible
arrays in the net_device structure. For more details, see the discussion
at [1].
Un-embed the net_devices from struct mt76_dev by converting them
into pointers, and allocating them dynamically. Use the leverage
alloc_netdev_dummy() to allocate the net_device object at
mt76_dma_init().
The free of the device occurs at mt76_dma_cleanup().
Link: https://lore.kernel.org/all/[email protected]/ [1]
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Breno Leitao <[email protected]>
Acked-by: Kalle Valo <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
Any station configured with an AID over 20 causes a firmware crash.
This situation occurred in our testing using an AP interface on 7922
hardware, with a modified hostapd, sourced from Mediatek's OpenWRT
feeds.
In stock hostapd, station AIDs begin counting at 1, and this
configuration is prevented with an upper limit on associated stations.
However, the modified hostapd began allocation at 65, which caused the
firmware to crash. This fix does not allow these AIDs to work, but will
prevent the firmware crash.
This crash was only seen on IFTYPE_AP interfaces, and the fix does not
appear to have an effect on IFTYPE_STATION behavior.
Fixes: 5c14a5f944b9 ("mt76: mt7921: introduce mt7921e support")
Signed-off-by: Rory Little <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Enable 160MHz beamformee support on mt7922 by updating HE capability
element configuration. Previously, only 160MHz channel width was set,
but beamformee for 160MHz was not properly advertised. This patch
adds BEAMFORMEE_MAX_STS_ABOVE_80MHZ_4 capability to allow devices
to utilize 160MHz BW for beamforming.
Tested by connecting to 160MHz-bandwidth beamforming AP and verified
HE capability.
Signed-off-by: Quan Zhou <[email protected]>
Link: https://patch.msgid.link/ae637afaffed387018fdc43709470ef65898ff0b.1756383627.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <[email protected]>
When station mode, don't disconnect when we get
channel switch from AP to DFS channel. Most APs
send CSA request after pass background CAC. In other
case we should disconnect after detect beacon miss.
Without patch when we get CSA to DFS channel get:
"kernel: wlo1: preparing for channel switch failed, disconnecting"
Signed-off-by: Janusz Dziedzic <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Several places use rcu_dereference to get a wcid entry without validating
if the index exceeds the array boundary. Fix this by using a helper function,
which handles validation.
Signed-off-by: Felix Fietkau <[email protected]>
The decap offload configuration should only be applied after the STA has
been successfully initialized. Attempting to configure it earlier can lead
to corruption of the MAC configuration in the chip's hardware state.
Add an early check for `msta->deflink.wcid.sta` to ensure the station peer
is properly initialized before proceeding with decapsulation offload
configuration.
Cc: [email protected]
Fixes: 24299fc869f7 ("mt76: mt7921: enable rx header traslation offload")
Signed-off-by: Deren Wu <[email protected]>
Link: https://patch.msgid.link/f23a72ba7a3c1ad38ba9e13bb54ef21d6ef44ffb.1748149855.git.deren.wu@mediatek.com
Signed-off-by: Felix Fietkau <[email protected]>
