During hardware restart, link_id can be IEEE80211_LINK_UNSPECIFIED,
causing an out-of-bounds array access on msta->link[].
Add mt7996_sta_link() and mt7996_sta_link_protected() helper functions
for accessing sta links with proper RCU handling and bounds checking.
Use them for any sta link RCU access.
Reported-by: Chad Monroe <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
On channels with NO_IR or RADAR flags, wait for beacon before sending
probe requests. Allows active scanning and WPS on restricted channels
if another AP is already present.
Fixes: c56d6edebc1f ("wifi: mt76: mt7996: use emulated hardware scan support")
Signed-off-by: Chad Monroe <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Move mt7996_npu_hw_stop routine before disabling rx NAPIs in order to
fix NPU stop procedure used during device L1 SER recovery.
Add missing usleep_range in mt7996_npu_hw_stop().
Fixes: 377aa17d2aedc ("wifi: mt76: mt7996: Add NPU offload support to MT7996 driver")
Tested-by: Kang Yang <[email protected]>
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Switch to the secondary link if available in mt7996_mac_sta_remove_links
routine if the primary one is removed.
Moreover reset secondary link index for single link scenario.
Fixes: 85cd5534a3f2e ("wifi: mt76: mt7996: use correct link_id when filling TXD and TXP")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Since some radar specifications maintained by the driver are incorrect
and are now also maintained by the firmware, offload the initialization
procedure to the firmware.
This fixes issues for radar detection rate testings.
Signed-off-by: StanleyYP Wang <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
RDD_DET_MODE is a firmware command intended for testing and does not
pause TX after radar detection, so remove it from the normal flow;
instead, use the MAC_ENABLE_CTRL firmware command to resume TX after
the radar-triggered channel switch completes.
Fixes: 1529e335f93d ("wifi: mt76: mt7996: rework radar HWRDD idx")
Co-developed-by: Shayne Chen <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Signed-off-by: StanleyYP Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Grab the mt76 mutex running mt7996_mac_sta_rc_work() since it is
required by mt7996_mcu_add_rate_ctrl routine.
Fixes: 28d519d0d493a ("wifi: mt76: Move RCU section in mt7996_mcu_add_rate_ctrl_fixed()")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Move mt76_abort_scan routine out of mt76_reset_device() in order to
avoid a possible deadlock since mt76_reset_device routine is running
with mt76 mutex help and mt76_abort_scan_complete() can grab mt76 mutex
in some cases.
Fixes: b36d55610215a ("wifi: mt76: abort scan/roc on hw restart")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Tested-by: Ben Greear <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Move mt7996_update_beacons routine inside mt76 mutex critical section
in mt7996_mac_reset_work() in order to run mt7996_vif_conf_link() in
mt7996_mcu_add_beacon routine.
Fixes: f30906c55a400 ("wifi: mt76: mt7996: disable beacons when going offchannel")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Tested-by: Ben Greear <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
This patch fixes the following key issues:
- Pass correct link BSS to mt7996_mcu_add_key(), and use HW beacon
protection mode for mt7990 chipset
- Do not do group key deletion for GTK and IGTK due to FW design, the
delete key command will delete all group keys of a link BSS
- For deleting BIGTK, FW adds a new flow, but the "sec->add" field
should be filled with "SET_KEY". Note that if BIGTK is not deleted, it
will cause beacon decryption issue when switching from an AP interface
to a station interface
Fixes: 0c45d52276fd ("wifi: mt76: mt7996: fix setting beacon protection keys")
Co-developed-by: Allen Ye <[email protected]>
Signed-off-by: Allen Ye <[email protected]>
Co-developed-by: Peter Chiu <[email protected]>
Signed-off-by: Peter Chiu <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Obtain the correct link ID and, if needed, switch to the corresponding
wcid before populating the TX descriptor and TX payload.
Rules for link id:
- For QoS data of MLD peers (excluding EAPOL), select the primary or
secondary wcid based on whether the TID is odd or even to meet FW/HW
requirements
- For other packets, use IEEE80211_TX_CTRL_MLO_LINK if specified
(such as multicast and broadcast packets)
Signed-off-by: Shayne Chen <[email protected]>
Acked-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Introduce Airoha NPU support to MT7996 driver. NPU is used to enable
traffic forward offloading between the MT76 NIC and the Airoha ethernet one
available on the Airoha EN7581 SoC using Netfilter Flowtable APIs.
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
The mt7996 driver currently checks the MT_RXD3_NORMAL_FCS_ERR bit in
rxd1 whereas other Connac3-based drivers(mt7925) correctly check this
bit in rxd3.
Since the MT_RXD3_NORMAL_FCS_ERR bit is defined in the fourth RX
descriptor word (rxd3), update mt7996 to use the proper descriptor
field. This change aligns mt7996 with mt7925 and the rest of the
Connac3 family.
Fixes: 98686cd21624 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Alok Tiwari <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Link: https://patch.msgid.link/[email protected]
MediaTek has asked to switch from the ISC license to BSD-3-Clause-Clear,
in order to improve clarity and the legal integrity of the code.
The BSD-3-Clause license includes the "no endorsement" clause, which is
important for protecting the reputation of the original authors and
contributors by preventing unauthorized use of their names for endorsement
purposes.
This clause is absent in the BSD-2-Clause license, which is more permissive
but lacks this specific protection.
This change also cleans up the license of some Kconfig/Makefile files,
which were accidentally marked as GPL.
The GPL 2.0 remains in use on mt76x0, as well as two source files in mt7615
for which the license situation still needs to be clarified.
Signed-off-by: Felix Fietkau <[email protected]>
Enable VTA flag in txwi to enable HQD in SPL which is needed by
the PST. Without this patch, PST cannot get the correct delay of
TxD and lead to a large latency.
Signed-off-by: Peter Chiu <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Port latest version of similar changes from mt7915:
- use reconfig_complete to restart mac_work / queues
- reset full wtbl after firmware init
- clear wcid and vif mask to avoid leak
- fix sta poll list corruption
- clear rro list
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
There is only one wiphy, so extra calls must be removed.
For calls that need to remain per-wiphy, use mt7996_for_each_phy
Fixes: 69d54ce7491d ("wifi: mt76: mt7996: switch to single multi-radio wiphy")
Signed-off-by: Felix Fietkau <[email protected]>
Support writing MAC TXD for the AddBA Req. Without this commit, the
start sequence number in AddBA Req will be unexpected value for MT7996
and MT7992. This can result in certain stations (e.g., AX200) dropping
packets, leading to ping failures and degraded connectivity. Ensuring
the correct MAC TXD and TXP helps maintain reliable packet transmission
and prevents interoperability issues with affected stations.
Signed-off-by: Howard Hsu <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Introduce rx_rro_ind_process and rx_rro_add_msdu_page callbacks and the
related logic in the MT7996 driver. This is a preliminary patch to
decouple RRO logic from WED support and reuse RRO when WED module is not
available.
Signed-off-by: Rex Lu <[email protected]>
Co-developed-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Packets belonging to the same TID can be sent over multiple links.
AMPDU rx reordering must be performed over all active links. Fix the
problem always using default link for AMPDU rx reordering.
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Non-station wcid entries must not be passed to the rx functions.
In case of the global wcid entry, it could even lead to corruption in the wcid
array due to pointer being casted to struct mt7996_sta_link using container_of.
Fixes: 7464b12b7d92 ("wifi: mt76: mt7996: rework mt7996_rx_get_wcid to support MLO")
Signed-off-by: Felix Fietkau <[email protected]>
When a wcid can't be found, link_sta can be stale from a previous batch.
The code currently assumes that if link_sta is set, wcid is also non-zero.
Fix wcid NULL pointer dereference by resetting link_sta when a wcid entry
can't be found.
Fixes: 62da647a2b20 ("wifi: mt76: mt7996: Add MLO support to mt7996_tx_check_aggr()")
Signed-off-by: Felix Fietkau <[email protected]>
Avoid leaking beacons on unrelated channels during scanning/roc
Fixes: c56d6edebc1f ("wifi: mt76: mt7996: use emulated hardware scan support")
Reported-by: Chad Monroe <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Several places use rcu_dereference to get a wcid entry without validating
if the index exceeds the array boundary. Fix this by using a helper function,
which handles validation.
Signed-off-by: Felix Fietkau <[email protected]>
Since mt7996_mcu_add_rate_ctrl() and mt7996_mcu_set_fixed_field() can't
run in atomic context, move RCU critical section in
mt7996_mcu_add_rate_ctrl() and mt7996_mcu_set_fixed_field(). This patch
fixes a 'sleep while atomic' issue in mt7996_mac_sta_rc_work().
Fixes: 0762bdd30279 ("wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Tested-by: Ben Greear <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
