Unify all per-chip conditionals under the new is_connac2() helper. This
avoids confusion caused by the previous is_mt7921() check, which
implicitly covered multiple connac2 chipsets and no longer reflected its
actual scope. This is a clean-up only change with no functional impact.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
mt76_connac_mcu_alloc_sta_req() allocates an skb which is expected to
be freed eventually by mt76_mcu_skb_send_msg(). However, currently if
an intermediate function fails before sending, the allocated skb is
leaked.
Specifically, mt76_connac_mcu_sta_wed_update() and
mt76_connac_mcu_sta_key_tlv() may fail, leading to an immediate memory
leak in the error path.
Fix this by explicitly freeing the skb in these error paths.
Commit 7c0f63fe37a5 ("wifi: mt76: mt7996: fix memory leak on
mt7996_mcu_sta_key_tlv error") made a similar change.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: d1369e515efe ("wifi: mt76: connac: introduce mt76_connac_mcu_sta_wed_update utility routine")
Fixes: 6683d988089c ("mt76: connac: move mt76_connac_mcu_add_key in connac module")
Fixes: 4f831d18d12d ("wifi: mt76: mt7915: enable WED RX support")
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Zilin Guan <[email protected]>
Link: https://patch.msgid.link/[email protected]
An extra blank line gets printed after printing firmware version
because the build date is null terminated. Remove the "\n" from
dev_info() calls to print firmware version and build date to fix
the problem.
Reported-by: Mario Limonciello <[email protected]>
Signed-off-by: Shuah Khan <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
MediaTek has asked to switch from the ISC license to BSD-3-Clause-Clear,
in order to improve clarity and the legal integrity of the code.
The BSD-3-Clause license includes the "no endorsement" clause, which is
important for protecting the reputation of the original authors and
contributors by preventing unauthorized use of their names for endorsement
purposes.
This clause is absent in the BSD-2-Clause license, which is more permissive
but lacks this specific protection.
This change also cleans up the license of some Kconfig/Makefile files,
which were accidentally marked as GPL.
The GPL 2.0 remains in use on mt76x0, as well as two source files in mt7615
for which the license situation still needs to be clarified.
Signed-off-by: Felix Fietkau <[email protected]>
Update the destination index to use 'n_ssids', which is incremented only
when a valid SSID is present. Previously, both mt76_connac_mcu_hw_scan()
and mt7925_mcu_hw_scan() used the loop index 'i' for the destination
array, potentially leaving gaps if any source SSIDs had zero length.
Cc: [email protected]
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Michael Lo <[email protected]>
Signed-off-by: Ming Yen Hsieh <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Rely on GFP_ATOMIC flag in __mt76_connac_mcu_alloc_sta_req since it can
run in atomic context. This is a preliminary patch to fix a 'sleep while
atomic' issue in mt7996_mac_sta_rc_work().
Fixes: 0762bdd30279 ("wifi: mt76: mt7996: rework mt7996_mac_sta_rc_work to support MLO")
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
In mt76_connac_mcu_sta_basic_tlv() link_conf is always not NULL.
Revert the commit '9890624c1b39 ("wifi: mt76: Check link_conf pointer in
mt76_connac_mcu_sta_basic_tlv()")' in order to fix the following
warning:
drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c:394 mt76_connac_mcu_sta_basic_tlv()
warn: variable dereferenced before check 'link_conf'
This reverts commit 9890624c1b3948c1c7f1d0e19ef0bb7680b8c80d.
Signed-off-by: Lorenzo Bianconi <[email protected]>
Link: https://patch.msgid.link/20250325-mt76_connac_mcu_sta_basic_tlv-link_conf-revert-v1-1-b84efefb74ee@kernel.org
Signed-off-by: Felix Fietkau <[email protected]>
When the system suspend or resume, the WiFi driver sends
an hif_ctrl command to the firmware and waits for an event.
Due to changes in the event format reported by the chip, the
current mt7925's driver does not account for these changes,
resulting in command timeout. Add flow to handle hif_ctrl
event to avoid command timeout. We also exented API
mt76_connac_mcu_set_hif_suspend for connac3 this time.
Signed-off-by: Quan Zhou <[email protected]>
Link: https://patch.msgid.link/3a0844ff5162142c4a9f3cf7104f75076ddd3b87.1735910562.git.quan.zhou@mediatek.com
Signed-off-by: Felix Fietkau <[email protected]>
This commit extends the `mt76_connac_mcu_uni_add_dev` function to include
support for Multi-Link Operation (MLO). Additionally, backward
compatibility for MT7921 is preserved, enabling seamless integration with
existing setups.
Fixes: 86c051f2c418 ("wifi: mt76: mt7925: enabling MLO when the firmware supports it")
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Rework connac helpers related to rate and phymode.
This is a preliminary patch to add MLO support for mt7996 chipsets.
Co-developed-by: Bo Jiao <[email protected]>
Signed-off-by: Bo Jiao <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Extend mt76_connac_get_phy_mode_v2 with the per-link STA configuration.
The patch we created is a prerequisite to enable the MLO function in the
driver. It is purely a refactoring patch so the functionality should
remain unchanged.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
Extend mt76_connac_mcu_uni_add_dev with per-link BSS configuration.
The patch we created is a prerequisite to enable the MLO function in the
driver. It is purely a refactoring patch so the functionality should
remain unchanged.
We also extend link_idx field in mt76_connac_bss_basic_tlv for the firmware
to able to identify the link index in the MLO mode that is not harmful
for the current non-MLO mode.
Signed-off-by: Sean Wang <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Felix Fietkau <[email protected]>
This is expected by the firmware of older chipsets as well, though it may
not have been as strongly required as on mt799x
Fixes: 098428c400ff ("wifi: mt76: connac: set correct muar_idx for mt799x chipsets")
Signed-off-by: Felix Fietkau <[email protected]>
Set peer address and aid for the BMC wtbl of station interface. For some
functions such as parsing MU_EDCA parameters from beacon, firmware will
need the peer address to do correct parsing.
Without this patch, MU uplink traffic would get suffered.
Reported-by: Howard Hsu <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Before sending suspend & wow command to FW, its length should be
4-bytes alignd.
Signed-off-by: Ming Yen Hsieh <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
The wcid can be NULL. It should be checked for validity before
dereferencing it to avoid crash.
Fixes: 098428c400ff ("wifi: mt76: connac: set correct muar_idx for mt799x chipsets")
Signed-off-by: Muhammad Usama Anjum <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Because the number of channels to be configured is calculated using the %,
and it results in 0 when there's an exact division, this leads to some
channels not having their tx power configured.
Fixes: 7801da338856 ("wifi: mt76: mt7921: enable set txpower for UNII-4")
Signed-off-by: Ming Yen Hsieh <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
The MUAR (multicast unicast address) is an address mapping table that
participates in the process of searching WTBL entries. For mt799x
chipsets, the default muar index of BMC WTBL is 0xe.
Signed-off-by: Shayne Chen <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Add an address of fw region for fw download.
Fixes: c948b5da6bbe ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Support firmware download and enable related AFE PLL for mt7992 chipsets.
This is a preliminary patch for mt7992 chipsets support.
Co-developed-by: Benjamin Lin <[email protected]>
Signed-off-by: Benjamin Lin <[email protected]>
Co-developed-by: Shayne Chen <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Signed-off-by: StanleyYP Wang <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Add a BSS eht_support check before returning EHT phy mode. Without this
patch, there might be an inconsistency where the softmac layer thinks
the BSS is in HE mode, while the FW thinks it is in EHT mode.
Signed-off-by: MeiChia Chiu <[email protected]>
Signed-off-by: Shayne Chen <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
mt76_connac_mcu_get_nic_capability() is used by mt7921 only. It
would be better to put the code in chip folder. And we can provide
more chip capability information in mt792x_phy without making
mt76_phy much bigger.
The three functions would be moved to mt7921 folder and renamed.
mt76_connac_mcu_parse_tx_resource()
mt76_connac_mcu_parse_phy_cap()
mt76_connac_mcu_get_nic_capability()
Signed-off-by: Deren Wu <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
The variable band should be determined by the ieee80211_chanctx_conf when
the driver is a kind of chanctx one e.g mt7921 and mt7922 driver so we
added the extension to mt76_connac2_mac_tx_rate_val and
mt76_connac_get_he_phy_cap for the firmware can select the proper rate.
Fixes: 41ac53c899bd ("wifi: mt76: mt7921: introduce chanctx support")
Signed-off-by: Sean Wang <[email protected]>
Tested-by: David Ruth <[email protected]>
Signed-off-by: Deren Wu <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Add eht field in struct mt76_power_limits for 802.11be power config.
The function stack size would be too big by eht adding in structure,
we also refactor mt76_connac_mcu_rate_txpower_band() to take dynamic
allocated memory instead.
This is a preliminary patch to support mt7925 driver.
Co-developed-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Deren Wu <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Add eht configuration support in existing function
mt76_connac_get_phy_mode_v2() and export it for mt7925.
This is a preliminary patch to support mt7925 driver.
Co-developed-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Deren Wu <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
mt7925 rely on the similar functionalities in connac layer.
Export them for mt7925 reuse.
This is a preliminary patch to support mt7925 driver.
Co-developed-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Deren Wu <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Introduce is_mt7925() helper for new chipset. mt7925 runs the same
firmware download and mmio map flow as mt7921.
This is a preliminary patch to support mt7925 driver.
Co-developed-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Deren Wu <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
mt76 scan command only support 64 channels currently. If the
channel count is larger than 64(for 2+5+6GHz), some channels will
not be scanned. Hence change the scan type to full channel scan
in case of the command cannot include proper list for chip.
Fixes: 399090ef9605 ("mt76: mt76_connac: move hw_scan and sched_scan routine in mt76_connac_mcu module")
Reported-by: Ben Greear <[email protected]>
Tested-by: Isaac Konikoff <[email protected]>
Signed-off-by: Ming Yen Hsieh <[email protected]>
Signed-off-by: Deren Wu <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Introduce p2p-go/p2p-client support to mt7921 driver
CONNECTION_P2P_GC/GO is not supported with the current firmware
so we added mt76_dev to mt76_connac_mcu_sta_basic_tlv signature to
use CONNECTION_INFRA_STA/AP instead for p2p-client and p2p-go
respectively to make it work.
Signed-off-by: Sean Wang <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Add helpers to get eht cap and phymode on different bands and vifs.
This is the preliminary patch to add EHT support for mt7996.
Signed-off-by: Shayne Chen <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
Due to information missing, the firmware may be fail on bandwidth
related settings in mt7921/mt7922. Add new cmd STA_REC_HE_V2 to apply
additional capabilities in 6GHz band.
Tested-by: Ben Greear <[email protected]>
Co-developed-by: Deren Wu <[email protected]>
Signed-off-by: Deren Wu <[email protected]>
Signed-off-by: Ming Yen Hsieh <[email protected]>
Signed-off-by: Felix Fietkau <[email protected]>
